EN IEC 62976:2019/A1:2022
(Amendment)Industrial non-destructive testing equipment - Electron linear accelerator
Industrial non-destructive testing equipment - Electron linear accelerator
Industrielle Ausrüstung für die zerstörungsfreie Prüfung - Elektronenlinearbeschleuniger
This document gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film, computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.
Appareils destinés aux essais non destructifs pour le secteur industriel - Accélérateur électronique linéaire
Oprema za industrijsko neporušitveno preskušanje - Elektronski linearni pospeševalnik - Dopolnilo A1 (IEC 62976:2017/AMD1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62976:2019/A1:2023
01-februar-2023
Oprema za industrijsko neporušitveno preskušanje - Elektronski linearni
pospeševalnik - Dopolnilo A1 (IEC 62976:2017/AMD1:2021)
Industrial non-destructive testing equipment - Electron linear accelerator (IEC
62976:2017/AMD1:2021)
Industrielle Ausrüstung für die zerstörungsfreie Prüfung - Elektronenlinearbeschleuniger
(IEC 62976:2017/AMD1:2021)
Appareils destinés aux essais non destructifs pour le secteur industriel - Accélérateur
électronique linéaire (IEC 62976:2017/AMD1:2021)
Ta slovenski standard je istoveten z: EN IEC 62976:2019/A1:2022
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
27.120.01 Jedrska energija na splošno Nuclear energy in general
SIST EN IEC 62976:2019/A1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62976:2019/A1:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62976:2019/A1:2023
EUROPEAN STANDARD EN IEC 62976:2019/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2022
ICS 27.120.01
English Version
Industrial non-destructive testing equipment - Electron linear
accelerator
(IEC 62976:2017/AMD1:2021)
Appareils destinés aux essais non destructifs pour le Industrielle Ausrüstung für die zerstörungsfreie Prüfung -
secteur industriel - Accélérateur électronique linéaire Elektronenlinearbeschleuniger
(IEC 62976:2017/AMD1:2021) (IEC 62976:2017/AMD1:2021)
This amendment A1 modifies the European Standard EN IEC 62976:2019; it was approved by CENELEC on 2022-05-24. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62976:2019/A1:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62976:2019/A1:2023
EN IEC 62976:2019/A1:2022 (E)
European foreword
This document (EN IEC 62976:2019/A1:2022) consists of the text of document
IEC 62976:2019/AMD1:2021, prepared by IEC/SC 45B “Radiation protection instrumentation” of
IEC/TC 45 "Nuclear instrumentation".
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-06-16
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2025-12-16
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN and CENELEC
websites.
Endorsement notice
The text of the International Standard IEC 62976:2019/AMD1:2021 was approved by CEN-CENELEC
as a European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN IEC 62976:2019/A1:2023
IEC 62976
®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Industrial non-destructive testing equipment – Electron linear accelerator
Appareils destinés aux essais non destructifs pour le secteur industriel –
Accélérateur électronique linéaire
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.120.01 ISBN 978-2-8322-5462-2
Warning! Make sure that you obtained this publication from an authorized distri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.