EN 60154-2:2016
(Main)Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides
Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides
IEC 60154-2:2016 specifies the dimensions of flanges for ordinary rectangular waveguide for use in electronic equipment. It covers requirements for flanges drilled before or after mounting on waveguides. It should be noted that for optimum electrical performance, post-drilling of the alignment holes after mounting is recommended. The aim of this standard is to specify for waveguide flanges the mechanical requirements necessary to ensure compatibility and, as far as practicable, interchangeability as well as to ensure adequate electrical performance. This edition includes the following significant technical changes with respect to the previous edition: a) revise the estimation for return loss at connection interface of waveguides; b) add two type of waveguide flange for high frequency application, i.e. over 50 GHz; c) expand the operation frequency range up to 3,3 THz; d) rename the frequency band over R 1200, i.e. R1,2k.
Flansche für Hohlleiter - Teil 2: Allgemeine Anforderungen an Flansche für Rechteck-Hohlleiter
Brides pour guides d'ondes - Partie 2: Spécifications applicables relatives aux brides pour guides d'ondes rectangulaires normaux
L'IEC 60154-2:2016 spécifie les dimensions des brides pour guides d'ondes rectangulaires normaux utilisées dans les équipements électroniques. Elle couvre les exigences applicables aux brides percées avant ou après montage sur les guides d'ondes. Il convient de noter que pour garantir des performances électriques optimales, il est recommandé de percer les trous d'alignement après le montage. La présente norme a pour but de spécifier les exigences mécaniques applicables aux brides de guides d'ondes qui sont nécessaires pour assurer la compatibilité et, autant que possible, l'interchangeabilité, mais aussi pour assurer des performances électriques suffisantes. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) révision de l'estimation de l'affaiblissement de réflexion au niveau de l'interface de connexion des guides d'ondes; b) ajout de deux types de brides de guide d'ondes pour les applications à haute fréquence, c'est-à-dire au-delà de 50 GHz; c) extension de la plage de fréquences de fonctionnement jusqu'à 3,3 THz; d) attribution d'un nouveau nom à la plage de fréquences R 1200, à savoir R 1,2K.
Prirobnice za valovode - 2. del: Ustrezne specifikacije za prirobnice za navadne pravokotne valovode (IEC 60154-2:2016)
Ta del standarda IEC 60154 določa mere prirobnic za navadne pravokotne valovode, ki se uporabljajo v elektronski opremi.
Zajema zahteve za prirobnice, izvrtane pred ali po namestitvi na valovode. Opozoriti je treba, da je za optimalno električno zmogljivost priporočljivo vrtanje poravnalnih odprtin po namestitvi.
Cilj tega standarda je določiti mehanske zahteve, potrebne za zagotovitev združljivosti in, v največji možni meri, medsebojne zamenljivosti ter ustrezne električne zmogljivosti za prirobnice valovodov.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60154-2:2017
01-januar-2017
1DGRPHãþD
SIST EN 60154-2:1999
SIST EN 60154-2:1999/A1:1998
Prirobnice za valovode - 2. del: Ustrezne specifikacije za prirobnice za navadne
pravokotne valovode (IEC 60154-2:2016)
Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary
rectangular waveguides (IEC 60154-2:2016)
Flansche für Hohlleiter - Teil 2: Allgemeine Anforderungen für Flansche für Rechteck-
Hohlleiter (IEC 60154-2:2016)
Brides pour guides d'ondes - Partie 2: Spécifications particulières de brides pour guides
d'ondes rectangulaires normaux (IEC 60154-2:2016)
Ta slovenski standard je istoveten z: EN 60154-2:2016
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60154-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60154-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2016
ICS 33.100.10 Supersedes EN 60154-2:1997
English Version
Flanges for waveguides - Part 2: Relevant specifications for
flanges for ordinary rectangular waveguides
(IEC 60154-2:2016)
Brides pour guides d'ondes - Partie 2: Spécifications Flansche für Hohlleiter - Teil 2: Allgemeine Anforderungen
applicables relatives aux brides pour guides d'ondes an Flansche für Rechteck-Hohlleite
rectangulaires normaux (IEC 60154-2:2016)
(IEC 60154-2:2016)
This European Standard was approved by CENELEC on 2016-08-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60154-2:2016 E
---------------------- Page: 2 ----------------------
EN 60154-2:2016
European foreword
The text of document 46F/305/CDV, future edition 3 of IEC 60154-2, prepared by SC 46F "RF and
microwave passive components", of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60154-2:2016.
The following dates are fixed:
(dop) 2017-05-25
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-11-25
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 60154-2:1997.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60154-2:2016 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 3 ----------------------
EN 60154-2:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
...
SLOVENSKI STANDARD
SIST EN 60154-2:2017
01-januar-2017
Nadomešča:
SIST EN 60154-2:1999
SIST EN 60154-2:1999/A1:1998
Prirobnice za valovode - 2. del: Ustrezne specifikacije za prirobnice za navadne
pravokotne valovode (IEC 60154-2:2016)
Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary
rectangular waveguides (IEC 60154-2:2016)
Flansche für Hohlleiter - Teil 2: Allgemeine Anforderungen für Flansche für Rechteck-
Hohlleiter (IEC 60154-2:2016)
Brides pour guides d'ondes - Partie 2: Spécifications particulières de brides pour guides
d'ondes rectangulaires normaux (IEC 60154-2:2016)
Ta slovenski standard je istoveten z: EN 60154-2:2016
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60154-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60154-2:2017
---------------------- Page: 2 ----------------------
SIST EN 60154-2:2017
EUROPEAN STANDARD EN 60154-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2016
ICS 33.100.10 Supersedes EN 60154-2:1997
English Version
Flanges for waveguides - Part 2: Relevant specifications for
flanges for ordinary rectangular waveguides
(IEC 60154-2:2016)
Brides pour guides d'ondes - Partie 2: Spécifications Flansche für Hohlleiter - Teil 2: Allgemeine Anforderungen
applicables relatives aux brides pour guides d'ondes an Flansche für Rechteck-Hohlleiter
rectangulaires normaux (IEC 60154-2:2016)
(IEC 60154-2:2016)
This European Standard was approved by CENELEC on 2016-08-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60154-2:2016 E
---------------------- Page: 3 ----------------------
SIST EN 60154-2:2017
EN 60154-2:2016
European foreword
The text of document 46F/305/CDV, future edition 3 of IEC 60154-2, prepared by SC 46F "RF and
microwave passive components", of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60154-2:2016.
The following dates are fixed:
(dop) 2017-05-25
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-11-25
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 60154-2:1997.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60154-2:2016 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 60154-2:2017
EN 60154-2:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.