EN 60154-4:2017
(Main)Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides
Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides
IEC 60154-4:2017 specifies the dimensions of flanges for circular waveguides for use in electronic equipment. It covers requirements for flanges drilled before or after mounting on waveguides. The aim of this document is to specify for waveguide flanges the mechanical requirements necessary to ensure compatibility and, as far as practicable, interchangeability as well as to ensure adequate electrical performance. This edition includes the following significant technical changes with respect to the previous edition: - revise the estimation for return loss at connection interface of waveguides; - add two type of waveguide flange for high frequency application, i.e. over 50 GHz; - expand the operation frequency range up to 3,3 THz; - rename the frequency band over R1200, i.e. R1.2K.
Flansche für Hohlleiter - Teil 4: Allgemeine Anforderungen an Flansche für Rundhohlleiter
Brides pour guides d'ondes - Partie 4: Spécifications particulières applicables aux brides pour guides d'ondes circulaires
L'IEC 60154-4:2017 spécifie les dimensions des brides pour guides d'ondes circulaires pour utilisation dans les équipements électroniques. Elle couvre les exigences applicables aux brides percées avant ou après montage sur les guides d'ondes. Le présent document a pour but de spécifier des exigences mécaniques applicables aux brides pour guides d'ondes qui sont nécessaires pour assurer la compatibilité et, autant que possible, l'interchangeabilité, mais aussi pour assurer des performances électriques suffisantes. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - révision de l'estimation de l'affaiblissement de réflexion au niveau de l'interface de connexion de guides d'ondes; - ajout de deux types de brides de guides d'ondes pour les applications à haute fréquence, c'est-à-dire au-delà de 50 GHz; - extension de la plage de fréquences de travail jusqu'à 3,3 THz; - attribution d'un nouveau nom à la bande de fréquences R1200, à savoir R1.2K.
Ustrezne specifikacije za prirobnice za krožne valovode (IEC 60154-4:2017)
Ta del standarda IEC 60154-4 določa mere prirobnic za krožne valovode, ki se uporabljajo v elektronski opremi.
Zajema zahteve za prirobnice, izvrtane pred ali po namestitvi na valovode. Cilj tega dokumenta je določiti mehanske zahteve, potrebne za zagotovitev združljivosti in, v največji možni meri, medsebojne zamenljivosti ter ustrezne električne zmogljivosti za prirobnice valovodov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60154-4:2017
01-oktober-2017
1DGRPHãþD
SIST HD 129.4 S1:2002
Ustrezne specifikacije za prirobnice za krožne valovode (IEC 60154-4:2017)
Relevant specifications for flanges for circular waveguides (IEC 60154-4:2017)
Flansche für Hohlleiter - Teil 4: Allgemeine Empfehlungen für Flansche für Rundrohr-
Hohlleiter (IEC 60154-4:2017)
Brides pour guides d'ondes - Partie 4: Spécifications particulières de brides pour guides
d'ondes circulaires (IEC 60154-4:2017)
Ta slovenski standard je istoveten z: EN 60154-4:2017
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60154-4:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60154-4:2017
---------------------- Page: 2 ----------------------
SIST EN 60154-4:2017
EUROPEAN STANDARD EN 60154-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2017
ICS 33.120.10 Supersedes HD 129.4 S1:1977
English Version
Flanges for waveguides -
Part 4: Relevant specifications for flanges
for circular waveguides
(IEC 60154-4:2017)
Brides pour guides d'ondes - Flansche für Hohlleiter -
Partie 4: Spécifications particulières applicables aux brides Teil 4: Allgemeine Anforderungen an Flansche
pour guides d'ondes circulaires für Rundhohlleiter
(IEC 60154-4:2017) (IEC 60154-4:2017)
This European Standard was approved by CENELEC on 2017-04-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60154-4:2017 E
---------------------- Page: 3 ----------------------
SIST EN 60154-4:2017
EN 60154-4:2017
European foreword
The text of document 46F/346A/CDV, future edition 2 of IEC 60154-4, prepared by SC 46F "RF and
microwave passive components", of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60154-4:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-01-28
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-07-28
the document have to be withdrawn
This document supersedes HD 129.4 S1:1977.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60154-4:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60153 NOTE Harmonized in HD 123 / EN 60153 series.
IEC 60153-4 NOTE Harmonized as HD 123.4.
ISO/IEC 17025:2005 NOTE Harmonized as EN ISO/IEC 17025:2005 (not modified).
2
---------------------- Page: 4 ----------------------
SIST EN 60154-4:2017
EN 60154-4:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.