IEC 60286-5:2003/AMD1:2009

Amendment 1 - Packaging of components for automatic handling - Part 5: Matrix trays

Amendement 1 - Emballage des composants pour opérations automatisées - Partie 5: Supports matriciels

General Information

• Status: Published
• Publication Date: 10-Feb-2009
• ICS: 31.020 - Electronic components in general
• Technical Committee: TC 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: MT 60286-5 - TC 40/MT 60286-5
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 25-Apr-2018

Relations

• Revised: IEC 60286-5:2018 - Packaging of components for automatic handling - Part 5: Matrix trays
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60286-5


®

Edition 2.0 2009-02



INTERNATIONAL



STANDARD




AMENDMENT 1
Packaging of components for automatic handling –
Part 5: Matrix trays




IEC 60286-5:2003/A1:2009(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED

Copyright © 2009 IEC, Geneva, Switzerland



All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.



IEC Central Office
3, rue de Varembé

CH-1211 Geneva 20

Switzerland
Email: [e-mail]
Web: www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]

---------------------- Page: 2 ----------------------
IEC 60286-5


®

Edition 2.0 2009-02



INTERNATIONAL



STANDARD




AMENDMENT 1
Packaging of components for automatic handling –
Part 5: Matrix trays



INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 31.020 ISBN 978-2-88910-093-4
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – 60286-5 Amend. 1 © IEC:2009(E)



FOREWORD


This amendment has been prepared by IEC technical committee 40: Capacitors and resistors

for electronic equipment.


The text of this amendment is based on the following documents:


FDIS Report on voting

40/1942/FDIS 40/1971/RVD


Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

_____________

---------------------- Page: 4 ----------------------
60286-5 Amend. 1 © IEC:2009(E) – 3 –


2.1 Electrostatic dissipative requirements


Replace the existing text by the following text:


Trays shall be moulded from material that meets the ESD dissipative requirements with
5

ohms/square but less than
surface resistance equal to or greater than 1,0 × 10

11
1,0 × 10 ohms/square.





4.1.3.1 Formulas
Replace the existing text by the following text:
DT is D + strengthening pocket rib width W
max
ET is E ” + strengthening pocket rib width W
max
M is (135,9 mm – M3(N1 – 1))/2
M1  is (315,0 mm – M2(N2 – 1))/2
M2 is [(315,0 mm – 2P mm) – W(N2 – 1)]/N2 + W
M3 is [(135,9 mm – 2P mm) – W(N1 – 1)]/N1 + W
N1 is (135,9 mm −2P mm)/ET (rounded down to a whole number)
N2 is (315,0 mm − 2P mm )/DT (rounded down to a whole number)
Add, after the NOTE, the following new text and Table 1:
The dimensions P and W are given in Table 1.
Table 1 – P and W dimension
Thin tray Thick tray
Dimension
Normal stacking tray Low stacking tray
mm
mm mm
P 3,2 5,0 5,0
W 2,0 2,5 2,0


4.1.3.2 Constituents of the design rules, formulas and drawings
Add, on page 8, the following line to the list:
P is the edge of the tray to the edge of the pocket
4.1.3.2 Constituents of the design rules, formulas and drawings
Replace the last paragraph by the following new text:
W should not exceed the target value of Table 1 in order to achieve the maximum tray density
unless required by application.

---------------------- Page: 5 ----------------------
– 4 – 60286-5 Amend. 1 © IEC:2009(E)


4.2 Overall tray dimensions


Replace, in the first paragraph, ”Table 1” by ”Table 2”.


Replace Table 1 by new Table 2:


Table 2 – Height dimensions


Thin tray Thick tray

Dimension
Normal stacking tray Low stacking tray

mm

mm mm
A 7,62 7,62 12,19
A1 6,35 5,62 10,16
A2 1,27 typically 2,00 typically 2,03 typically

Add, below Table 2, the following new paragraph:
Measurement methodology of the tray outline dimensions, height, stacking feature dimensions
and warpage are described in Annex B.
4.5 Detail features
Replace the existing paragraph by the following new text:
All cavity detail features must begin at a minimum distance of P = 3,2 mm [
...

IEC 60286-5


®


Edition 2.0 2009-02



INTERNATIONAL



STANDARD



NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1

Packaging of components for automatic handling –
Part 5: Matrix trays

Emballage des composants pour opérations automatisées –
Partie 5: Supports matriciels


IEC 60286-5:2003-10/AMD1:2009-02(EN-FR)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED


Copyright © 2009 IEC, Geneva, Switzerland


All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.



Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.


Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.


Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].

---------------------- Page: 2 ----------------------
IEC 60286-5



®



Edition 2.0 2009-02







INTERNATIONAL





STANDARD







NORME



INTERNATIONALE
colour

inside



A MENDMENT 1

AM ENDEMENT 1





Packaging of components for automatic handling –

Part 5: Matrix trays




Emballage des composants pour opérations automatisées –

Partie 5: Supports matriciels

















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX M


ICS 31.020 ISBN 978-2-8322-1324-7



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 3 ----------------------
– 2 – 60286-5 Amend. 1  IEC:2009



FOREWORD


This amendment has been prepared by IEC technical committee 40: Capacitors and resistors

for electronic equipment.


This bilingual version (2014-01) corresponds to the monolingual English version, published in

2009-02.


The text of this amendment is based on the following documents:


FDIS Report on voting
40/1942/FDIS 40/1971/RVD

Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The French version of this amendment has not been voted upon.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.


_____________

---------------------- Page: 4 ----------------------
60286-5 Amend. 1  IEC:2009 – 3 –


2.1 Electrostatic dissipative requirements


Replace the existing text by the following text:


Trays shall be moulded from material that meets the ESD dissipative requirements with
5

surface resistance equal to or greater than 1,0 × 10 ohms/square but less than
11

1,0 × 10 ohms/square.





4.1.3.1 Formulas
Replace the existing text by the following text:
DT is D + strengthening pocket rib width W
max
ET is E ” + strengthening pocket rib width W
max
M is (135,9 mm – M3(N1 – 1))/2
M1  is (315,0 mm – M2(N2 – 1))/2
M2 is [(315,0 mm – 2P mm) – W(N2 – 1)]/N2 + W
M3 is [(135,9 mm – 2P mm) – W(N1 – 1)]/N1 + W
N1 is (135,9 mm −2P mm)/ET (rounded down to a whole number)
N2 is (315,0 mm − 2P mm )/DT (rounded down to a whole number)
Add, after the NOTE, the following new text and Table 1:
The dimensions P and W are given in Table 1.
Table 1 – P and W dimension
Thin tray Thick tray
Dimension
Normal stacking tray Low stacking tray
mm
mm mm
P 3,2 5,0 5,0
W
2,0 2,5 2,0


4.1.3.2 Constituents of the design rules, formulas and drawings
Add, on page 8, the following line to the list:
P is the edge of the tray to the edge of the pocket
4.1.3.2 Constituents of the design rules, formulas and drawings
Replace the last paragraph by the following new text:
W should not exceed the target value of Table 1 in order to achieve the maximum tray density
unless required by application.

---------------------- Page: 5 ----------------------
– 4 – 60286-5 Amend. 1  IEC:2009


4.2 Overall tray dimensions


Replace, in the first paragraph, ”Table 1” by ”Table 2”.


Replace Table 1 by new Table 2:


Table 2 – Height dimensions


Thin tray Thick tray

Dimension
Normal stacking tray Low stacking tray

mm

mm mm
A 7,62 7,62 12,19
A1 6,35 5,62 10,16
A2 1,27 typically 2,00 typically 2,03 typically

Add, below Table 2, the following new paragraph:
Measurement methodology of the tray outline dimensions, height, stacking feature dimensions
and warpage are described in Annex B.
4.5 Detail features
Replace the existing paragraph by the following new text:
All cavity detail features must begin at a minimum distance of P = 3,2 mm [Thin tray(normal
tray)] or P = 5,0 mm [Thin tray(Low stack tray) and Thick tray)].
Add the following new subclause:
4.8 Dimensional information
Figures 3 and 4 state dimensions for the tray main view and for the tray stacking details.
Replace Figures 3 and 4 by new Figures 3 and 4:

---------------------- Page: 6 ----------------------
60286-5 Amend. 1  IEC:2009 – 5 –













IEC  083/09


Figure 3 – Tray main view

---------------------- Page: 7 ----------------------
– 6 – 60286-5 Amend. 1  IEC:2009













P
P
IEC  084/09


Figure 4 – Tray stacking details

Notes related to Figures 3 and 4
Add, at the end of Note 15, the following new sentence:
All tray measurements except height measurement should be done with the tray unrestrained.

---------------------- Page: 8 ----------------------
60286-5 Amend. 1  IEC:2009 – 7 –


A.1.1 Dimensional information


Replace the first sentence by the following sentence:


See Table 1, column “Thin tray”, and Figure A.1





Add the following new Annex B.

---------------------- Page: 9 ----------------------
– 8 – 60286-5 Amend. 1  IEC:2009


Annex B

(normative)



Measurement methodology of the tray dimensions




B.1 General


This annex describes the definitions of terms and the measurement methodology of the

specified tray dimensions.

B.2 Definition of the dimensions
B.2.1 Outline dimensions
The outline dimensions are the maximum dimensions of length (315,0 mm) and width
(135,9 mm) which are measured in the cross sections of the indicated locations in Figure B.1.
NOTE See Figure 3.

IEC  085/09

Figure B.1a – Dimensions 315,0 mm and 135,9 mm



IEC  086/09 IEC  087/09

Figure B.1b – Dimension 315,0 mm

---------------------- Page: 10 ----------------------
60286-5 Amend. 1  IEC:2009 – 9 –










IEC  088/09 IEC  089/09




Figure B.1c – Dimension 135,9 mm

Figure B.1 – Cross- sections of the outline dimensions
B.2.2 Tray thickness (A)
The tray thickness is the maximum dimension, but not include any tray deformations such as
peripheral warpage. (Refer to Figure B.2.)
IEC  090/ 09

Figure B.2 – Tray thickness
B.2.3 Dimensions of the stacking feature
Dimensions of the stacking feature are length (311,15 mm. 311,66 mm) and width (132,08 mm.
132,59 mm) of the particular features that fit in each other when the same type of tray is
stacked.
NOTE See Figure 4, Section H-H, Section J-J
B.2.4 Warpage

The warpage is the maximum lift from the reference plane. (Refer to Figure B.4.)
IEC  091/09


Figure B.4a – Convex warpage

---------------------- Page: 11 ----------------------
– 10 – 60286-5 Amend. 1  IEC:2009








IEC  092/09




Figure B.4b – Concave warpage


Figure B.4 – Examples of tray warpage
B.3 Measuring instrument
Measuring instrument shall have a suitable measuring range and accuracy for measurement.
B.4 Measurement conditions
Measurement conditions shall be as follows:
Temperature: 23 °C ± 2 °C
Humidity: 35 % – 75 % R.H.
B.5 Measurement methodology
B.5.1 Outline dimensions
The tray length 315,0 mm shall be the maximum dimension among the measurement taken in
the vicinity of section a-a or b-b in Figure B.5. The tray width 135,9
...