ISO 20474-15:2019

Earth-moving machinery — Safety — Part 15: Requirements for compact tool carriers

This document gives the safety requirements specific to compact tool carriers. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1. This document deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance. This document is not applicable to machines manufactured before the date of its publication.

Engins de terrassement — Sécurité — Partie 15: Exigences applicables aux porte-outils compacts

General Information

• Status: Published
• Publication Date: 15-Apr-2019
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: ISO/TC 127/SC 2 - Safety, ergonomics and general requirements
• Drafting Committee: ISO/TC 127/SC 2 - Safety, ergonomics and general requirements
• Parallel Committee: ISO/TC 23/SC 15 - Machinery for forestry
• Current Stage: 9020 - International Standard under periodical review
• Start Date: 15-Apr-2024
• Completion Date: 15-Apr-2024

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 20474-15
First edition
2019-04
Earth-moving machinery — Safety —
Part 15:
Requirements for compact tool
carriers
Engins de terrassement — Sécurité —
Partie 15: Exigences applicables aux porte-outils compacts
Reference number
ISO 20474-15:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 20474-15:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 20474-15:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety requirements and protective measures . 2
4.1 General . 2
4.2 Compact tool carriers with operator platform . 3
4.3 Operator's station . 3
4.4 Operator’s controls and indicators . 3
4.5 Brake systems . 4
4.6 Visibility . 4
4.7 Warning devices and safety signs . 4
4.8 Stability . 4
4.8.1 General requirements . 4
4.8.2 Tipping limit . 4
4.8.3 Bucket application . 5
4.8.4 Fork application . 5
4.8.5 Other applications . 6
4.9 Object handling
...