ISO/ASTM 52927

Additive manufacturing — General principles — Main characteristics and corresponding test methods

Fabrication additive — Principes généraux — Principales caractéristiques et méthodes d'essai correspondantes

General Information

• Status: Not Published
• ICS: 25.030 - Additive manufacturing
• Technical Committee: ISO/TC 261 - Additive manufacturing
• Drafting Committee: ISO/TC 261/JG 76 - Joint ISO/TC 261-ASTM F 42 Group : Revision of ISO 17296-3 & ASTM F3122-14
• Current Stage: 6000 - International Standard under publication
• Completion Date: 28-Feb-2024

Relations

• Consolidates: ISO/TS 24541:2020 - Service activities relating to drinking water supply, wastewater and stormwater systems — Guidelines for the implementation of continuous monitoring systems for drinking water quality and operational parameters in drinking water distribution networks
• Effective Date: 06-Jun-2022
• Revises: ISO 17296-3:2014 - Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
• Effective Date: 11-Dec-2021

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/ASTM
FDIS
52927
ISO/TC 261
Additive manufacturing — General
Secretariat: DIN
principles — Main characteristics
Voting begins on:
and corresponding test methods
2024-01-02
Fabrication additive — Principes généraux — Principales
Voting terminates on:
caractéristiques et méthodes d'essai correspondantes
2024-02-27
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/ASTM FDIS 52927:2024(en) © ISO/ASTM International 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/ASTM FDIS 52927:2024(en)
International
Standard
ISO/ASTM
FDIS
52927
ISO/TC 261
Additive manufacturing — General
Secretariat: DIN
principles — Main characteristics
Voting begins on:
and corresponding test methods
Fabrication additive — Principes généraux — Principales
Voting terminates on:
caractéristiques et méthodes d'essai correspondantes
COPYRIGHT PROTECTED DOCUMENT
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
© ISO/ASTM International 2024
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
IN ADDITION TO THEIR EVALUATION AS
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
ISO copyright office ASTM International TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: [phone] Phone: [phone]
Fax: [phone]
Email: [e-mail] Email: [e-mail]
Website: www.iso.org Website: www.astm.org
Published in Switzerland Reference number
ISO/ASTM FDIS 52927:2023(en) © ISO/ASTM International 2023

© ISO/ASTM International 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/ASTM FDIS 52927:2023(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Main characteristics and corresponding test methods . 2
4.1 General .2
4.2 Selection criteria .2
5 Part and process testing — Specifications and quality criteria . 3
...

Style Definition
...
Style Definition
...
2023-12-05 Style Definition
...
Style Definition
...
ISO/ASTM FDIS 52927:2023(E)
Style Definition
...
Style Definition
ISO/TC 261 & ASTM F 42
...
Style Definition
...
Secretariat: DIN
Style Definition
...
Date: 2023-xx
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Additive manufacturing — General principles — Main
Style Definition
...
characteristics and corresponding test methods
Style Definition
...
Style Definition
Fabrication additive — Principes généraux — Principales caractéristiques et méthodes d'essai
...
correspondantes
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
FDIS stage
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...

---------------------- Page: 1 ----------------------
ISO/ASTM FDIS 52927:2023(E)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: HeaderCentered, Line spacing: single
© ISO/ASTM 2023
Formatted: Header distance from edge: 1.27 cm, Footer
distance from edge: 0.5 cm
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
Commented [eXtyles1]: Not found: "ISO/ASTM 2023"
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
Formatted: Default Paragraph Font
be requested from either ISO at the address below or ISO’s member body in the country of the requester. In the
Formatted: Default Paragraph Font
United States, such requests should be sent to ASTM International.
Formatted: Indent: Left: 0 cm, Right: 0 cm, Space
ISO copyright office ASTM International
Before: 0 pt, Adjust space between Latin and Asian text,
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
Adjust space between Asian text and numbers
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: + 41 22 749 01 11 Phone: [phone]
Fax: [phone] Fax: [phone]
Email: [e-mail] Email: [e-mail]
Website: www.iso.org Website: www.astm.org
Commented [eXtyles2]: The URL http://www.astm.org
has been redirected to https://www.astm.org/. Please verify
the URL.
E-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber, Line spacing:
single
ii © ISO/ASTM International 2023 – All rights reserved
© ISO/ASTM 2023 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO/ASTM FDIS 52927:2023 (E)
Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Contents
Formatted: HeaderCentered, Left, Line spacing: single
Foreword .vi Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
Introduction. viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Main characteristics and corresponding test methods . 2
4.1 General . 2
4.2 Selection criteria . 3
5 Part and proc
...