ISO/TR 21916:2021
(Main)Solid recovered fuels — Guidance for the specification of solid recovered fuels (SRF) for selected uses
Solid recovered fuels — Guidance for the specification of solid recovered fuels (SRF) for selected uses
This document addresses the provision of background references that are helpful in defining a more detailed specification for SRF according to its specific end use for energy conversion (EfW plants) and to support the SRF market. The aim is to enable all the interested stakeholders – producers, end users, legislators, local authority bodies and standardization bodies – to guarantee that the SRF complies fully with technical, environmental and economic requirements and to facilitate its social acceptability when utilized for energy conversion. This document is intended to provide references for the specification of SRF produced from non-hazardous waste streams and traded to EfW plants as waste. The quality of such SRF is specified through values for relevant fuel properties, appropriate to the subsequent end uses that have an expected growth or an established/well consolidated role in heat and power generation in waste-to-energy systems: — coal co-combustion in cement kilns, — gasification, — coal co-combustion in power plants. The SRF can also be used in other end-use applications but these are not addressed in this document.
Combustibles solides de récupération — Recommandations pour la spécification des combustibles solides de récupération (SFR) pour des utilisations choisies
General Information
Buy Standard
Standards Content (Sample)
TECHNICAL ISO/TR
REPORT 21916
First edition
2021-07
Solid recovered fuels — Guidance for
the specification of solid recovered
fuels (SRF) for selected uses
Reference number
ISO/TR 21916:2021(E)
©
ISO 2021
---------------------- Page: 1 ----------------------
ISO/TR 21916:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TR 21916:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviations . 1
3.1 Terms and definitions . 1
3.2 Symbols and abbreviated terms. 5
4 Compilation, structure and use of data . 6
5 SRF and other waste derived fuels . 7
5.1 General . 7
5.2 Terms used for secondary fuels from waste .10
5.3 Rules for the classification and specification of SRF .14
5.4 Market for SRF and other waste-derived fuels .18
6 Coal co-combustion in the cement manufacturing industry .20
6.1 General .20
6.2 End use requirements of SRF and other waste derived fuels .21
6.2.1 Technical limitation of the technologies .21
6.2.2 Quality requirements in plant permits .25
6.2.3 Quality requirements in general guidelines .25
6.2.4 Quality requirements in voluntary end user specifications .26
6.3 Typical values for SRF .27
7 Coal co-combustion in power plants .
...
TECHNICAL ISO/TR
REPORT 21916
First edition
Solid recovered fuels — Guidance for
specification of solid recovered fuels
(SRF) for selected uses
PROOF/ÉPREUVE
Reference number
ISO/TR 21916:2021(E)
©
ISO 2021
---------------------- Page: 1 ----------------------
ISO/TR 21916:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TR 21916:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviations . 1
3.1 Terms and definitions . 1
3.2 Symbols and abbreviated terms. 5
4 Compilation, structure and use of data . 6
5 SRF and other waste derived fuels . 7
5.1 General . 7
5.2 Terms used for secondary fuels from waste .10
5.3 Rules for the classification and specification of SRF .14
5.4 Market for SRF and other waste-derived fuels .18
6 Coal co-combustion in the cement manufacturing industry .20
6.1 General .20
6.2 End use requirements of SRF and other waste derived fuels .21
6.2.1 Technical limitation of the technologies .21
6.2.2 Quality requirements in plant permits .25
6.2.3 Quality requirements in general guidelines .25
6.2.4 Quality requirements in voluntary end user specifications .26
6.3 Typical values for SRF .27
7 Coal co-combustion in power plants .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.