ISO/FDIS 13680
(Main)Oil and gas industries including lower carbon energy — Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
Oil and gas industries including lower carbon energy — Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels: — PSL-1, which is the basis of this document; — PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series. At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1. NOTE 1 The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2. NOTE 2 For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series. NOTE 3 Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F. This document contains no provisions relating to the connection of individual lengths of pipe. This document contains provisions relating to marking of tubing and casing after threading. This document is applicable to the following five groups of products: a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure; b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy; c) group 3, which is composed of stainless alloys with an austenitic structure (iron base); d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base); e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure. NOTE 4 Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone — Produits sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production, tubes-ébauches pour manchons et matériau pour accessoires — Conditions techniques de livraison
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL DRAFT
International
Standard
ISO/FDIS 13680
ISO/TC 67/SC 5
Oil and gas industries including
Secretariat: JISC
lower carbon energy — Corrosion-
Voting begins on:
resistant alloy seamless products
2024-02-16
for use as casing, tubing, coupling
Voting terminates on:
stock and accessory material —
2024-04-12
Technical delivery conditions
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 13680:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 13680:2024(en)
International
Standard
ISO/FDIS 13680
ISO/TC 67/SC 5
Oil and gas industries including
Secretariat: JISC
lower carbon energy — Corrosion-
Voting begins on:
resistant alloy seamless products
for use as casing, tubing, coupling
Voting terminates on:
stock and accessory material —
Technical delivery conditions
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 13680:2024(en) © ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 13680:2024(en)
Contents Page
Foreword .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, abbreviated terms and symbols . 4
3.1 Terms and definitions .4
3.2 Abbreviated terms .6
3.3 Symbols .7
4 General . 8
4.1 Dual normative references .8
4.2 Units of measurement .8
5 Information supplied by the purchaser . 8
6 Manufac
...
ISO/FDIS 13680: 2023(E)
ISO/TC 67/SC 5/WG 3
Secretariat: JISC
Date: 2023-11-292024-02-01
PetroleumOil and natural gas industries including lower carbon
energy — Corrosion-resistant alloy seamless products for use as
casing, tubing, coupling stock and accessory material — Technical
delivery conditions
Industries du pétrole et du gaz naturel — Produits sans soudure en acier allié résistant à la corrosion utilisés
comme tubes de cuvelage, tubes de production, tubes-ébauches pour manchons et matériau pour
accessoires — Conditions techniques de livraison
---------------------- Page: 1 ----------------------
FDIS stage
---------------------- Page: 2 ----------------------
ISO 13680:2020(E)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Office copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland.
© ISO 2020 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO 13680:2020(E)
Contents
Foreword .ix
1 Scope . 1
2 Normative references . 2
3 Terms, definitions, abbreviated terms and symbols . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 8
3.3 Symbols . 8
4 General . 9
4.1 Dual normative references . 9
4.2 Units of measurement . 9
5 Information supplied by the purchaser . 10
6 Manufacturing process . 12
6.1 Melting practices . 12
6.2 Product manufacturing process . 12
6.3 Pipe end sizing . 13
6.4 Straightening . 13
6.5 Processes requiring validation . 13
6.6 Traceability . 14
6.7 Manufacturing procedure qualification test . 14
6.8 Process for update of alloys and/or grades .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.