ISO/TS 15638-17:2013
(Main)Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM)
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM)
ISO/TS 15638-17:2013 addresses the provision of ?Consignment and location monitoring' and specifies the form and content of such data required to support such systems, and access methods (4.1) to that data. ISO/TS 15638-17:2013 provides specifications (4.45) for common communications and data exchange aspects of the application service (4.3) Consignment and location monitoring that a regulator (4.41) may elect to require or support as an option, including: a) high level definition of the service that a service provider (4.43) has to provide, (The service definition describes common service elements; but does not define the detail of how such an application service (4.3) is instantiated, not the acceptable value ranges of the data concepts defined); b) means to realise the service; c) application data, naming content and quality that an IVS (4.27) has to deliver. The definition of what comprises a 'regulated' service is regarded as an issue for National decision, and may vary from jurisdiction (4.31) to jurisdiction. This document does not impose any requirements on nations in respect of which services for regulated vehicles jurisdictions will require, or support as an option, but provides standardised sets of requirements descriptions for identified services to enable consistent and cost efficient implementations where instantiated. ISO 15638 has been developed for use in the context of regulated commercial freight vehicles (hereinafter referred to as ?regulated vehicles' (4.40). There is nothing, however, to prevent a jurisdiction extending or adapting the scope to include other types of regulated vehicles, as it deems appropriate.
Systèmes intelligents de transport — Cadre pour applications télématiques collaboratives pour véhicules de fret commercial réglementé (TARV) — Partie 17: Monitorage de livraison et localisation
General Information
Relations
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 15638-17
First edition
2013-08-15
Intelligent transport systems —
Framework for collaborative Telematics
Applications for Regulated commercial
freight Vehicles (TARV) —
Part 17:
Consignment and location monitoring
(CLM)
Systèmes intelligents de transport — Cadre pour applications
télématiques collaboratives pour véhicules de fret commercial
réglementé (TARV) —
Partie 17
Reference number
ISO/TS 15638-17:2013(E)
©
ISO 2013
---------------------- Page: 1 ----------------------
ISO/TS 15638-17:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.
Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TS 15638-17:2013(E)
Contents Page
1 1 Scope . 1
2 2 Conformance . 1
3 3 Normative references . 2
4 4 Terms and definitions . 2
5 5 Symbols (and abbreviated terms) . 7
6 6. General overview and framework requirements . 9
7 7. Requirements for services using generic vehicle data . 9
8 8. Application services that require data in addition to basic vehicle data . 9
8.1 8.1 General . 9
8.2 8.2 Quality of service requirements . 9
8.3 8.3 Test requirements . 10
8.4 8.4 Marking, labelling and packaging . 10
9 9. Common features of regulated TARV application services . 10
9.1 9.1 General . 10
9.2 9.2 Common role of the jurisdiction, approval authority, service provider and user. . 11
9.3 9.3 Common characteristics for instantiations of regulated application services . 11
9.4 9.4 Common sequence of operations for regulated application services . 11
9.5 Quality of service . 11
9.5 9.6 Information security . 12
9.6 9.7 Data naming content and quality . 12
9.7 9.8 Software engineering quality systems . 12
9.8 9.9 Quality monitoring station . 12
9.9 9.10 Audits . 12
9.10 9.11 Data access control policy . 12
9.11 9.12 Approval of IVSs and service providers . 12
10 10. TARV Vehicle consignment and location monitoring (CLM) . 12
10.1 10.1 TARV CLM service description and scope . 12
10.1.1 10.1.1 TARV CLM monitoring use case . 12
10.1.2 10.1.2 Description of TARV CLM regulated application service . 13
10.1.3 10.1.3 Description of TARV ‘Vehicle consignment and location monitoring’ (TARV CLM)
application service . 13
10.2 Concept of operations for TARV CLM . 14
10.1.4 10.2.1 General . 14
10.1.5 10.2.2 Statement of the goals and objectives of the TARV CLM system . 15
10.1.6 10.2.3 Strategies, tactics, policies, and constraints affecting the TARV CLM system . 15
10.1.7 10.2.4 Organisations, activities, and interactions among participants and stakeholders for
TARV CLM . 16
10.1.8 10.2.5 Clear statement of responsibilities and authorities delegated for TARV CLM . 17
10.1.9 10.2.6 Equipment required for TARV CLM . 18
10.1.10 10.2.7 Operational processes for the TARV CLM system . 19
10.1.11 10.2.8 Role of the jurisdiction in TARV CLM . 19
10.1.12 10.2.9 Role of the TARV CLM prime service provider . 19
10.1.13 10.2.10 Role of the TARV CLM application service provider . 19
10.1.14 10.2.11 Role of the TARV CLM user . 19
10.1.15 10.2.12 Generic characteristics for all instantiations of the TARV CLM application service . 19
10.2 10.3 Sequence of operations for TARV CLM . 20
10.2.1 10.3.1 General . 20
10.3 10.4 TARV CLM service elements . 21
© ISO 2013 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/TS 15638-17:2013(E)
10.3.1 10.4.1 TARV CLM service element SE1: Establish ‘Vehicle consignment and location
monitoring’ regulations, requirements, and approval arrangements . 21
10.3.2 10.4.2 TARV CLM SE2: Request system approval . 21
10.3.3 10.4.3 TARV CLM SE3: User (operator) contracts with prime service provider . 21
10.3.4 10.4.4 TARV CLM SE4: User (operator) equips vehicle with a devices to provide
consignment information . 21
10.3.5 10.4.5 TARV CLM SE5: User contracts with application service provider. 21
10.3.6 10.4.6 TARV CLM SE6: application service provider uploads software into the TARV
equipped vehicles of the operator . 21
10.3.7 10.4.7 TARV CLM SE7: Time series or application service instigated recording of vehicle
consignment . 21
10.4.8 TARV CLM SE8: ‘Interrogated’ request for vehicle consignment data . 22
10.4 10.5 Generic TARV CLM data naming content and quality . 23
10.6 TARV CLM application service specific provisions for quality of service . 24
10.5 10.7 TARV CLM application service specific provisions for test requirements . 24
10.6 10.8 TARV CLM application specific rules for the approval of IVSs and ‘Service Providers’ . 25
12 11. Declaration of patents and intellectual property . 25
13 Annex A (Informative) Independent testing of the protocols defined in this Part of ISO
15638 . 26
14 A.1 Objectives . 26
15 A.2 TEST SCRIPT SERVICE: CLM Vehicle Consignment and Location Monitoring . 28
15.1.1 CTP 9.1.1 Instigated Vehicle Content Location Monitoring using 2G . 29
15.1.2 CTP 9.1.2 Interrogated Vehicle Content Location Monitoring using 2G . 31
15.1.3 CTP 9.1.3 Interrogated Vehicle Content Location Monitoring using 5.9GHz and
responding using 2G or 3G . 33
15.1.4 CTP 9.2.1 Instigated Vehicle Content Location Monitoring using 3G . 35
15.1.5 CTP 9.2.2 Interrogated at 5.9 GHz and send of Vehicle Content Location Monitoring using
3G . 37
15.1.6 CTP 9.3.1 Instigated Vehicle Content Location Monitoring using 802.11p (WAVE) 5.9 GHz . 39
15.1.7 CTP 9.3.2 Interrogated Vehicle Content Location Monitoring using 802.11p (WAVE) 5.9
GHz . 41
15.1.8 CTP 9.4.1 Instigated Vehicle Content Location Monitoring using Mesh WiFi . 43
15.1.9 CTP 9.4.2 Interrogated Vehicle Content Location Monitoring using Mesh WiFi . 45
iv © ISO 2013 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/TS 15638-17:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of
ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2. www.iso.org/directives.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received. www.iso.org/patents.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
The committee responsible for this document is ISO/TC 204, Intelligent transport systems
ISO 15638 consists of the following parts, under the general title Intelligent transport systems — Framework
for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV):
— Part 1 Framework and architecture
— Part 2: Common platform parameters using CALM
— Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the
providers of regulated services
— Part 5: Generic vehicle information
— Part 6: Regulated applications [Technical Specification]
— Part 7: Other applications
— Part 8: Vehicle access monitoring (VAM) [Technical Specification]
— Part 9: Remote electronic tachograph monitoring (RTM) [Technical Specification]
— Part 10: Emergency messaging system/eCall (EMS) [Technical Specification]
— Part 11: Driver work records (work and rest hours compliance) (DWR) [Technical Specification]
— Part 12: Vehicle mass monitoring (VMM) [Technical Specification]
— Part 14: Vehicle access control (VAC) [Technical Specification]
— Part 15: Vehicle location monitoring (VLM) [Technical Specification]
© ISO 2013 – All rights reserved v
---------------------- Page: 5 ----------------------
ISO/TS 15638-17:2013(E)
— Part 16: Vehicle speed monitoring (VSM) [Technical Specification]
— Part 17: Consignment and location monitoring (CLM) [Technical Specification]
— Part 18: ADR (Dangerous Goods) transport monitoring (ADR) [Technical Specification]
— Part 19: Vehicle parking facilities (VPF) [Technical Specification]
The following parts are under preparation:
— Part 4: System security requirements [Technical Specification]
Part 13: ‘Mass’ information for jurisdictional control and enforcement
vi © ISO 2013 – All rights reserved
---------------------- Page: 6 ----------------------
ISO/TS 15638-17:2013(E)
Introduction
Many ITS technologies have been embraced by commercial transport operators (4.36) and freight owners, in
the areas of fleet management, safety and security. Telematics (4.47) applications have also been developed
for governmental use. Such regulatory services in use or being considered vary from jurisdiction (4.31) to
jurisdiction, but include electronic on-board recorders, digital tachograph (4.46), on-board mass (4.34)
monitoring, ‘mass’ data for regulatory control and management (4.35) , vehicle access (4.1) methods,
hazardous goods (4.26) tracking and e-call (4.21). Additional applications with a regulatory impact being
developed include, fatigue management, speed monitoring and heavy vehicle penalties imposed based on
location, distance and time.
In such an emerging environment of regulatory and commercial applications (4.13), it is timely to consider an
overall architecture (4.9) (business and functional) that could support these functions from a single platform
within a commercial freight vehicle that operate within such regulations. International Standards will allow for a
speedy development and specification (4.45) of new applications that build upon the functionality of a generic
specification platform. A suite of standards documents is required to describe and define the framework (4.24)
and requirements so that the on board equipment and back office systems can be commercially designed in
an open market to meet common requirements of jurisdictions (4.31).
This suite of standards addresses and defines the framework (4.24) for a range of cooperative telematics (4.47)
applications for regulated commercial freight vehicles (4.40) (such as access methods (4.1), driver fatigue
management, speed monitoring, on-board mass (4.34) mass’ data for regulatory control and management
(4.35)The overall scope includes the concept of operation, legal and regulatory issues, and the generic
cooperative provision of services to regulated commercial freight vehicles (4.40), using an on-board ITS
platform. The framework is based on a (multiple) service provider (4.43) oriented approach with provisions for
the approval (4.6) and auditing (4.10) of service providers.
This suite of standards documents will:
provide the basis for future development of cooperative telematics (4.47) based ITS service (4.28)
applications for regulated commercial freight vehicles (4.40). Many elements to accomplish this are
already available. Existing relevant standards will be referenced, and the specifications (4.45) will use
existing standards (such as CALM) wherever practicable.
allow for a powerful platform for highly cost-effective delivery of a range of telematics applications for
regulated vehicles (4.40) .
a business architecture (4.9) based on a (multiple) service provider (4.43) oriented approach
address legal and regulatory aspects for the approval (4.6) and auditing (4.10) of service providers.
This suite of standards deliverables is timely as many governments (Europe, North America, Asia and
Australia/New Zealand) are considering the use of telematics (4.47) for a range of regulatory purposes.
Ensuring that a single in-vehicle platform can deliver a range of services to both government and industry
through open standards and competitive markets is a strategic objective.
This part of the ISO 15638 family of standards documents provides specifications (4.45) for consignment and
location monitoring.
NOTE: The definition of what comprises a ‘regulated’ vehicle is regarded as an issue for national decision, and may vary
from jurisdiction (4.31) to jurisdiction. This suite of standards documents does not impose any requirements on nations in
respect of how they define a regulated vehicle (4.40).
NOTE: The definition of what comprises a ‘regulated’ service is regarded as an issue for national decision, and may vary
from jurisdiction (4.31) to jurisdiction. This suite of standards documents does not impose any requirements on nations in
respect of which services for regulated vehicles (4.40) jurisdictions will require, or support as an option, but will provide
© ISO 2013 – All rights reserved vii
---------------------- Page: 7 ----------------------
ISO/TS 15638-17:2013(E)
standardised sets of requirements descriptions for identified services to enable consistent and cost efficient
implementations where implemented.
viii © ISO 2013 – All rights reserved
---------------------- Page: 8 ----------------------
TECHNICAL SPECIFICATION ISO/TS 15638-17:2013(E)
Intelligent transport systems — Framework for collaborative
Telematics Applications for Regulated commercial freight
Vehicles (TARV) —
Part 17:
Consignment and location monitoring (CLM)
1 Scope
This part of ISO 15638 addresses the provision of ‘Consignment and location monitoring’ and specifies the
form and content of such data required to support such systems, and access methods (4.1) to that data.
This part of ISO 15638 provides specifications (4.45) for common communications and data exchange aspects
of the application service (4.3) Consignment and location monitoring that a regulator (4.41) may elect to require
or support as an option, including:
a) high level definition of the service that a service provider (4.43) has to provide, (The service definition
describes common service elements; but does not define the detail of how such an application service
(4.3) is instantiated, not the acceptable value ranges of the data concepts defined);
b) means to realise the service;
c) application data, naming content and quality that an IVS (4.27) has to deliver.
The definition of what comprises a ‘regulated’ service is regarded as an issue for National decision, and may
vary from jurisdiction (4.31) to jurisdiction. This document does not impose any requirements on nations in
respect of which services for regulated vehicles jurisdictions will require, or support as an option, but provides
standardised sets of requirements descriptions for identified services to enable consistent and cost efficient
implementations where instantiated.
ISO 15638 has been developed for use in the context of regulated commercial freight vehicles (hereinafter
referred to as ‘regulated vehicles’ (4.40). There is nothing, however, to prevent a jurisdiction extending or
adapting the scope to include other types of regulated vehicles, as it deems appropriate.
2 Conformance
Requirements to demonstrate conformance to any of the general provisions or specific application services
(4.3) described in this part of ISO 15638 shall be within the regulations imposed by the jurisdiction (4.31) where
they are instantiated. Conformance requirements to meet the provisions of this International Standard are
therefore deemed to be under the control of, and to the specification of, the jurisdiction where the application
service(s) is/are instantiated.
The protocols defined in this Part of ISO 15638 have been independently tested. Annex A (Informative)
provides results of these tests. In any conformance assurance process undertaken by candidate systems,
where appropriate the results may be used as part of its process of conformance compliance.
© ISO 2013 – All rights reserved 1
---------------------- Page: 9 ----------------------
ISO/TS 15638-17:2013(E)
3 Normative references
The following referenced documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 15638-1 Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 1: Framework and architecture
ISO 15638 -2 Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 2: Common platform parameters
using CALM
ISO 15638 -3 Intelligent transport systems — Framework for collaborative telematics applications for
regulated commercial freight vehicles (TARV) — Part 3: Operating requirements,
'Approval Authority' procedures, and enforcement provisions for the providers of
regulated services
ISO 15638 -4 Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 4: System security
1
requirements
ISO 15638 -5 Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 5: Generic vehicle information
ISO 15638 -6 Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 6: Regulated applications
ISO 15638 -15 Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 15: Vehicle location monitoring
(VLM)
ISO 15638 -18 Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 18: ADR (Dangerous Goods)
transport monitoring (ADR)
ISO/TS 26683-1 Intelligent transport systems — Freight land conveyance content identification and
communication (FLC-CIC) — Part 1: Context, architecture and referenced standards
ISO TS 26683-2 Intelligent transport systems — Freight land conveyance content identification and
communication (FLC-CIC) — Part 2: Application interface profiles
4 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 15638-1 and the following apply.
4.1
access methods
procedures and protocols to provision and retrieve data
4.2
app
1
Under preparation.
2 © ISO 2013 – All rights reserved
---------------------- Page: 10 ----------------------
ISO/TS 15638-17:2013(E)
small (usually) Java™ (4.30) applets, organised as software bundles, that support application services (4.3) by
keeping the data pantry (4.18) provisioned with up-to-date data
4.3
application service
service provided by a service provider (4.43) enabled by accessing data from the IVS (4.27) of a regulated
vehicle (4.40) via a wireless communications network
4.4
application service provider
ASP
party that provides an application service (4.3)
4.5
app library
separately secure area of memory in IVS (4.27) where apps are stored [with different access controls to data
pantry (4.18)]
4.6
approval
formal affirmation that an applicant has satisfied all the requirements for appointment as an application service
provider (4.4) or that an application service delivers the required service levels.
4.7
approval agreement
written agreement made between an approval authority (regulatory) (4.8) and a service provider (4.43)
NOTE An approval authority (regulatory) (4.8) approval agreement recognises the fact that a service provider (4.43),
having satisfied the approval authority’s requirements for appointment as a service provider, is appointed in that capacity,
and sets out the legal obligations of the parties with respect to the on-going role of the service provider.
4.8
approval authority (regulatory)
organisation (usually independent) which conducts approval (4.6) and ongoing audit (4.10) for service providers
(4.43) on behalf of a jurisdiction (4.31)
4.9
architecture
formalised description of the design of the structure of TARV and its framework (4.24)
4.10
audit/auditing
review of a party’s capacity to meet, or continue to meet, the initial and ongoing approval agreements (4.7) as
a service provider (4.43)
4.11
basic vehicle data
data that shall be maintained/provided by all IVS (4.27) [regardless of jurisdiction (4.31)]
4.12
CALM communications access for land mobiles
layered solution that enables continuous or quasi continuous communications between vehicles and the
infrastructure, or between vehicles, using such (multiple) wireless telecommunications media that are
available in any particular location, and which have the ability to migrate to a different available media where
required and where media selection is at the discretion of user (4.48) determined parameters by using a suite
of standards based on ISO 21217 (CALM architecture) and ISO21210 (CALM networking) that provide a
common platform for a number of standardised media using ITS-stations (4.29) to provide wireless support for
applications, such that the application is independent of any particular wireless medium
4.13
© ISO 2013 – All rights reserved 3
---------------------- Page: 11 ----------------------
ISO/TS 15638-17:2013(E)
commercial application(s)
ITS applications in regulated vehicles (4.40) for commercial (non-regulated) purposes
EXAMPLE Asset tracking, vehicle and engine monitoring, cargo security, driver management etc.
4.14
consignment
shipment of goods/cargo to a destination
4.15
cooperative ITS
C-ITS
ITS applications for both regulatory and commercial purposes that require the exchange of data between
uncontracted parties using multiple ITS-stations (4.29) communicating with each other and sharing data with
other parties with whom they have no direct contractual relationship to provide one or more ITS services (4.28)
4.16
core data
basic vehicle data (4.11) plus any additional data required to provide an implemented regulated application
service (4.39)
4.17
dangerous goods
substances or articles which are potentially hazardous (for example, poisonous to humans, harmful to the
environment,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.