Personal protective equipment - Safety footwear (ISO/DIS 20345:2020)

This standard  specifies basic and additional (optional) requirements for safety footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour. Special risks are covered by complementary job-related standards, e.g. footwear for firefighters, electrical insulating footwear, footwear protecting against chain saw injuries, chemicals, molten metal splash, and protection for motor cycle riders.

Persönliche Schutzausrüstung - Sicherheitsschuhe (ISO/DIS 20345:2020)

Diese Internationale Norm legt Grundanforderungen und (freiwillige) Zusatzanforderungen an Sicherheitsschuhe für allgemeine Zwecke fest, z. B. durch die Behandlung mechanischer Risiken, der Rutschhemmung, thermischer Risiken und ergonomischer Merkmale. Sie legt zudem Anforderungen an angepasste oder individuell gefertigte orthopädische Sicherheitsschuhe fest. Diese Norm befasst sich nicht mit der Eigenschaft hoher Sichtbarkeit aufgrund des Zusammenwirkens mit der Kleidung (z. B. die Schuhe bedeckende Hosen) und den Arbeitsplatzbedingungen (z. B. Schmutz, Schlamm).
Besondere Risiken werden in ergänzenden, auf einzelne Tätigkeiten bezogenen Normen behandelt, (z. B. Schuhe für die Feuerwehr, elektrisch isolierende Schuhe, Schutzschuhe gegen Schnitte durch Kettensägen, Schuhe zum Schutz gegen Chemikalien, Schuhe zum Schutz gegen flüssige Metallspritzer, Schutzschuhe für Motorradfahrer).

Équipement de protection individuelle - Chaussures de sécurité (ISO/DIS 20345:2020)

Osebna varovalna oprema - Zaščitna obutev (ISO/DIS 20345:2020)

General Information

Status
Not Published
Public Enquiry End Date
19-Jun-2020
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
22-Apr-2020
Due Date
09-Sep-2020
Completion Date
09-Jul-2020

RELATIONS

Buy Standard

Draft
oSIST prEN ISO 20345:2020
English language
50 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 20345:2020
01-junij-2020
Osebna varovalna oprema - Zaščitna obutev (ISO/DIS 20345:2020)
Personal protective equipment - Safety footwear (ISO/DIS 20345:2020)
Persönliche Schutzausrüstung - Sicherheitsschuhe (ISO/DIS 20345:2020)

Équipement de protection individuelle - Chaussures de sécurité (ISO/DIS 20345:2020)

Ta slovenski standard je istoveten z: prEN ISO 20345
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
oSIST prEN ISO 20345:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 20345:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 20345:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20345
ISO/TC 94/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2020-04-13 2020-07-06
Personal protective equipment — Safety footwear
Équipement de protection individuelle — Chaussures de sécurité
ICS: 13.340.50
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20345:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345:2020(E)
Contents Page

Foreword ..........................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification and designs ........................................................................................................................................................................... 8

5 Basic requirements for safety footwear ....................................................................................................................................... 9

5.1 General ........................................................................................................................................................................................................... 9

5.2 Design ..........................................................................................................................................................................................................12

5.2.1 General...................................................................................................................................................................................12

5.2.2 Height of upper ..............................................................................................................................................................12

5.2.3 Heel area ..............................................................................................................................................................................12

5.3 Whole footwear ...................................................................................................................................................................................12

5.3.1 Manufacturing performance ...............................................................................................................................12

5.3.2 Toe protection .................................................................................................................................................................13

5.3.3 Leakproofness .................................................................................................................................................................14

5.3.4 Specific ergonomic features ................................................................................................................................14

5.3.5 Slip resistance .................................................................................................................................................................14

5.3.6 Innocuousness ................................................................................................................................................................15

5.3.7 Seam Strength .................................................................................................................................................................15

5.4 Upper ............................................................................................................................................................................................................15

5.4.1 General...................................................................................................................................................................................15

5.4.2 Thickness .............................................................................................................................................................................16

5.4.3 Tear strength ....................................................................................................................................................................17

5.4.4 Tensile properties ........................................................................................................................................................17

5.4.5 Flexing resistance ...................................................................... ...................................................................................17

5.4.6 Water vapour permeability and coefficient ...........................................................................................17

5.4.7 pH value ................................................................................................................................................................................18

5.4.8 Hydrolysis ...........................................................................................................................................................................18

5.4.9 Chromium VI content ................................................................................................................................................18

5.5 Lining ............................................................................................................................................................................................................18

5.5.1 Tear strength ....................................................................................................................................................................18

5.5.2 Abrasion resistance ....................................................................................................................................................18

5.5.3 Water vapour permeability and coefficient ...........................................................................................18

5.5.4 pH value ................................................................................................................................................................................19

5.5.5 Chromium VI content ................................................................................................................................................19

5.6 Tongue .........................................................................................................................................................................................................19

5.6.1 Tear strength ....................................................................................................................................................................19

5.6.2 pH value ................................................................................................................................................................................19

5.6.3 Chromium VI content ................................................................................................................................................19

5.7 Insole and insock ......... .......................................................................................................................................................................19

5.7.1 Thickness .............................................................................................................................................................................19

5.7.2 pH value ................................................................................................................................................................................19

5.7.3 Water permeability .....................................................................................................................................................19

5.7.4 Water absorption and desorption..................................................................................................................20

5.7.5 Abrasion resistance ....................................................................................................................................................20

5.7.6 Chromium VI content ................................................................................................................................................20

5.8 Outsole ........................................................................................................................................................................................................20

5.8.1 Design .....................................................................................................................................................................................20

5.8.2 Tear strength ....................................................................................................................................................................21

5.8.3 Abrasion resistance ....................................................................................................................................................21

5.8.4 Flexing resistance ...................................................................... ...................................................................................21

5.8.5 Hydrolysis ...........................................................................................................................................................................21

5.8.6 Interlayer bond strength ........................................................................................................................................21

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345:2020(E)

6 Additional requirements for safety footwear .....................................................................................................................22

6.1 General ........................................................................................................................................................................................................22

6.2 Whole footwear ...................................................................................................................................................................................22

6.2.1 Perforation resistance ..............................................................................................................................................22

6.2.2 Electrical properties ..................................................................................................................................................24

6.2.3 Resistance to inimical environments ..........................................................................................................25

6.2.4 Energy absorption of seat region ...................................................................................................................25

6.2.5 Water resistance .................. .................................................... ......................................................................................25

6.2.6 Metatarsal protection ...............................................................................................................................................25

6.2.7 Ankle protection ............................................................................................................................................................26

6.2.8 Cut resistance ..................................................................................................................................................................26

6.2.9 Scuff caps .............................................................................................................................................................................27

6.2.10 Slip resistance .................................................................................................................................................................27

6.3 Upper — Water penetration and absorption.............................................................................................................27

6.4 Outsole ........................................................................................................................................................................................................28

6.4.1 Resistance to hot contact .......................................................................................................................................28

6.4.2 Resistance to fuel oil ..................................................................................................................................................28

6.4.3 Ladder Grip ........................................................................................................................................................................28

7 Marking .......................................................................................................................................................................................................................28

8 Information to be supplied .....................................................................................................................................................................29

8.1 General ........................................................................................................................................................................................................29

8.2 Electrical properties ........................................................................................................................................................................30

8.2.1 Dissipative footwear ..................................................................................................................................................30

8.2.2 Antistatic footwear .....................................................................................................................................................30

8.3 Insocks ........................................................................................................................................................................................................31

8.4 Perforation resistance ......... ...........................................................................................................................................................31

8.5 Obsolescence deadline ..................................................................................................................................................................32

Annex A (normative) Customized safety footwear (adapted to fit an individual user or a

single unit to fit an individual user) ..............................................................................................................................................33

Annex B (informative) Assessment of the footwear by the wearer ...................................................................................37

Annex C (informative) Slip Resistance .............................................................................................................................................................39

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of PPE Regulation 2016/425 aimed to be covered ..................................................................42

Bibliography .............................................................................................................................................................................................................................44

iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

ISO 20345 was prepared by the European Committee for Standardization (CEN) Technical Committee

CEN/TC 161, Foot and leg protectors, in collaboration with Technical Committee ISO/TC 94, Personal

safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the

Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This third edition cancels and replaces the second edition (ISO 20345:2011), which has been technically

revised.
Changes between this edition and the 2011 version are as follows:
— revision of terms (3.);
— Figure 1 to Figure 4 revised;
— Table 1, Table 2 and Table 3 revised;
— heel area defined (5.2.3);

— toe protection, depending on ISO 22568-1 and ISO 22568-2, exchanging EN 12568:2010;

— requirement on slip resistance revised (5.3.5 and 6.2.10); marking “SR” introduced;

— requirement for seam strength of hybrid footwear added (5.3.7);
— requirement for upper materials not fulfilling WVP explained (5.4.6);
— abrasion of insoles revised (5.7.5);
— outsole requirements revised (5.8);
— outsole thickness revised (5.8.1.1);
— flexing resistance of outsole clarified (5.8.4);
© ISO 2020 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345:2020(E)

— perforation resistant insert, depending on ISO 22568-3 and ISO 22568-4, exchanging EN 12568:2010;

— tolerance added (6.2.3.1);

— former Annex A Hybrid Footwear included in the general text (Table 2, 6.2.5.2, Table 16);

— optional requirement of metatarsal protection revised (6.2.6);
— optional requirement on ankle protection clarified (6.2.7);
— optional requirement for “SC” scuff caps added (6.2.9);
— optional requirement for “LG” Ladder grip of outsoles added (6.4.3);
— marking revised (Table 16 and Table 21);
— information on obsolescence date added (8.5);
— normative Annex A with requirements for customized safety footwear added;
— informative Annex B assessment of the footwear by the wearer added;
— informative Annex C Slip resistance added;
— requirement for electrically insulating footwear (EN 50321) deleted;
— Annex ZA revised.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
vi © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 20345:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 20345:2020(E)
Personal protective equipment — Safety footwear
1 Scope

This International Standard specifies basic and additional (optional) requirements for safety footwear

used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks,

ergonomic behaviour. It also specifies requirements for orthopaedic customized or individual

manufactured orthopaedic safety footwear. This standard does not cover the property of high visibility

because of interaction with the clothing (e.g. trousers cover the footwear) and work area conditions

(e.g. dirt, mud).

Special risks are covered by complementary job-related standards (e.g. footwear for firefighters,

electrical insulating footwear, protection against chain saw injuries, protection against chemicals and

molten metal splash, protection for motorcycle riders).
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 20344:2021, Personal protective equipment — Test methods for footwear

ISO 22568-1:2019, Foot and leg protectors — Requirements and test methods for footwear components —

Part 1: Metallic toecaps

ISO 22568-2:2019, Foot and leg protectors — Requirements and test methods for footwear component —

Part 2: Non-metallic toecaps

ISO 22568-3:2019, Foot and leg protectors — Requirements and test methods for footwear components —

Part 3: Metallic perforation resistant inserts

ISO 22568-4:2019, Foot and leg protectors — Requirements and test methods for footwear components —

Part 4: Non-metallic perforation resistant inserts

ISO 21064:2017, Prosthetics and orthotics — Foot orthotics — Uses, functions classification and description

3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

Note 1 to entry The component parts of footwear are illustrated in Figure 1, Figure 2 and Figure 3.

Note 2 to entry Further terms and definitions can be found in ISO 19952:2005.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
© ISO 2020 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345:2020(E)
3.1
safety footwear

footwear incorporating safety features to protect the wearer from injuries that could arise through

accidents

Note 1 to entry: Items of safety footwear are fitted with toecaps designed to give protection against impact of at

least 200 J and against compression at least 15 kN.
3.2
upper

part or parts of a footwear that cover the toes, the top of the foot, the sides of the foot, and optionally

the back of the heel; it is attached to the outsole of a footwear
3.3
leather
hide or skin tanned to be imperishable
3.3.1
leather split

flesh or middle part of a hide or skin, obtained by splitting a thick leather, which is tanned to be

imperishable
3.4
rubber
vulcanized elastomers
3.5
polymeric materials

large molecules composed of repeating structural units (monomers) typically connected by chemical bond

EXAMPLE Polyurethane (PU) or polyvinylchloride (PVC).
3.6
insole

non-removable component used to form the base of the shoe to which the upper is usually attached

during lasting
3.7
insock

removable or non-removable footwear component used to cover completely the insole

3.7.1
seat sock

removable or non-removable footwear component used to cover the insole in the heel area footbed

3.7.2
footbed

removable or non-removable footwear component used to cover completely the insole; shaped according

to the sole of the foot

Note 1 to entry: “Non-removable” means that the component cannot be removed without any damage.

Note 2 to entry: “Removable” means, that the component can be removed, but it must be placed in the footwear

while wearing to maintain all safety features.
3.8
lining
material covering the inner surface of the upper
Note 1 to entry: The wearer’s foot is in direct contact with the lining.
2 © ISO 2020 – All rights reserved
---------------------- Page: 10 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345:2020(E)

Note 2 to entry: Where an upper is split at the forepart to house the toecap, or if an external piece of material is

stitched to the upper to form a pocket to house the toecap, the material under the toecap acts as a lining.

3.9
cleat
protruding part of the outer surface of the outsole
3.10
rigid outsole
outsole, which cannot be bent through an angle of 45° under a load of 30 N
3.11
perforation-resistant insert

Component, placed in the outsole complex or used as an insole simultaneously in order to provide

protection against perforation
3.12
safety toecap

component, placed in the footwear to protect the toes of the wearer from impacts and compression

3.13
scuff caps

abrasion resistant material or component to protect against scuff of the upper external toe region

3.14
heel area
counter (stiffener) area, rear part of the footwear
3.15
dissipative footwear

footwear with low resistance between the wearer and the ground, able to dissipate some static

electricity
3.16
antistatic footwear

Footwear maintaining some resistance between the wearer and the ground, able to dissipate some

static electricity
3.17
fuel oil
aliphatic hydrocarbon constituent of petroleum
3.18
specific job-related footwear
safety footwear relating to a specific profession

EXAMPLE Footwear for firefighters; footwear with resistance to chain saw cutting.

3.19
customized safety footwear
(adapted to fit an individual user or a single unit to fit an individual user)

covering all individual orthotic footwear according to ISO 21064:2017, 3.2 and other specific conditions

of a foot. They integrate in their design the recipient’s own physiognomy and the specific arrangements

aimed at modifying, correcting, compensating, curing, preventing, relieving a pathology, e.g.

overweight, diabetes, hyperhidrosis …
© ISO 2020 – All rights reserved 3
---------------------- Page: 11 ----------------------
oSIST prEN ISO 20345:2020
ISO/DIS 20345
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.