Additive manufacturing of metals - Powder bed fusion - Presentation of material properties in material data sheets (ISO/ASTM DIS 52929:2023)

This document specifies basic content and relevant parameters to be reported in material data sheets. Individual additions and extensions are permissible. This document is intended for manufacturers of PBF-LB/M or PBF-EB/M equipment, powder suppliers, service providers and users of the additively manufactured components.

Additive Fertigung von Metallen - Pulverbettbasiertes Schmelzen - Darstellung von Werkstoffkennwerten in Materialdatenblättern (ISO/ASTM DIS 52929:2023)

Fabrication additive de métaux - Fusion sur lit de poudre - Présentation des propriétés des matériaux dans les fiches de données de matériaux (ISO/ASTM DIS 52929:2023)

Aditivna proizvodnja kovinskih izdelkov - Spajanje prahu v postelji (PBF) - Predstavitev lastnosti materialov v podatkovnih listih (ISO/ASTM DIS 52929:2023)

General Information

Status
Not Published
Public Enquiry End Date
19-Dec-2023
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
20-Oct-2023
Due Date
08-Mar-2024
Completion Date
20-Dec-2023

Buy Standard

Draft
prEN ISO/ASTM 52929:2023
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52929:2023
01-december-2023
Aditivna proizvodnja kovinskih izdelkov - Spajanje prahu v postelji (PBF) -
Predstavitev lastnosti materialov v podatkovnih listih (ISO/ASTM DIS 52929:2023)
Additive manufacturing of metals - Powder bed fusion - Presentation of material
properties in material data sheets (ISO/ASTM DIS 52929:2023)
Additive Fertigung von Metallen - Pulverbettbasiertes Schmelzen - Darstellung von
Werkstoffkennwerten in Materialdatenblättern (ISO/ASTM DIS 52929:2023)
Fabrication additive de métaux - Fusion sur lit de poudre - Présentation des propriétés
des matériaux dans les fiches de données de matériaux (ISO/ASTM DIS 52929:2023)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52929
ICS:
25.030 3D-tiskanje Additive manufacturing
oSIST prEN ISO/ASTM 52929:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52929:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52929:2023
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52929
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-10-11 2024-01-03
Additive manufacturing of metals — Powder bed fusion —
Presentation of material properties in material data sheets
ICS: 25.030
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52929:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52929:2023
ISO/ASTM DIS 52929:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52929
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:

Additive manufacturing of metals — Powder bed fusion —
Presentation of material properties in material data sheets
ICS: 25.030
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2023 THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
NOT BE REFERRED TO AS AN INTERNATIONAL
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below STANDARD UNTIL PUBLISHED AS SUCH.
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
ISO copyright office ASTM International
TECHNOLOGICAL, COMMERCIAL AND
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
USER PURPOSES, DRAFT INTERNATIONAL
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
Phone: +41 22 749 01 11 Phone: +610 832 9634
POTENTIAL TO BECOME STANDARDS TO
Fax: +610 832 9635
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org Email: khooper@astm.org
NATIONAL REGULATIONS.
Website: www.iso.org Website: www.astm.org ISO/ASTM DIS 52929:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO/ASTM International 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO/ASTM 52929:2023
ISO/ASTM DIS 52929:2023(E)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.