SIST EN IEC 62282-6-101:2024
(Main)Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General requirements (IEC 62282-6-101:2024)
Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General requirements (IEC 62282-6-101:2024)
IEC 62282-6-101:2024 covers micro fuel cell power systems and fuel cartridges that are wearable or easily carried by hand, providing direct current outputs that do not exceed 60 V DC and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-100. This document covers micro fuel cell power systems and fuel cartridges. This document establishes the requirements for micro fuel cell power systems and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and cargo and consumer transportation and storage of such items. . Fuel cartridges refilled by the manufacturer or by trained technicians are covered by this document. The fuel cartridges covered by this document are not intended to be refilled by the consumer.
This first edition, together with the other parts of the IEC 62282-6-1XX series, cancels and replaces IEC 62282-6-100:2010 and IEC 62282-6-100:2010/AMD1:2012. This edition includes the following significant technical changes with respect to IEC 62282‑6‑100:2010 and IEC 62282-6-100:2010/AMD1:2012:
a) A new structure has been set up: IEC 62282-6-101 covers the general safety requirements common to all fuel types whereas IEC 62282-6-102 and subsequent parts of the IEC 62282‑6-1XX series cover particular requirements for specific fuel types based on the requirements given in IEC 62282-6-101.
Brennstoffzellentechnologien - Teil 6-101: Mikrobrennstoffzellen-Energiesysteme - Sicherheit - Allgemeine Anforderungen (IEC 62282-6-101:2024)
Technologies des piles à combustible - Partie 6-101: Systèmes à micropiles à combustible - Sécurité - Exigences générales (IEC 62282-6-101:2024)
IEC 62282-6-101:2024 uvre les systèmes à micropiles à combustible et les cartouches de combustible qui sont portatifs ou qui peuvent être facilement portés à la main et qui fournissent une tension de sortie en courant continu ne dépassant pas 60 V en courant continu et une puissance de sortie ne dépassant pas 240 VA. Les systèmes à piles à combustible portatifs qui fournissent des tensions de sortie supérieures à ces limites électriques relèvent de l’IEC 62282-5-100. Le présent document traite des systèmes à micropiles à combustible et des cartouches de combustible. Le présent document établit les exigences pour les systèmes à micropiles à combustible et les cartouches de combustible, afin d’assurer un degré de sécurité raisonnable pour l’utilisation normale, le mauvais usage raisonnablement prévisible, ainsi que le transport et le stockage de tels éléments par le consommateur et par cargo. Les cartouches de combustible rechargées par le fabricant ou par des techniciens formés sont couvertes par le présent document. Les cartouches de combustible couvertes par le présent document ne sont pas destinées à être rechargées par le consommateur.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 62282‑6‑100:2010 et à l’IEC 62282-6-100:2010/A1:2012:
a) une nouvelle structure a été établie: l’IEC 62282-6-101 couvre les exigences générales de sécurité communes à tous les types de combustibles, tandis que l’IEC 62282-6-102 et les parties suivantes de la série IEC 62282‑6-1XX couvrent les exigences particulières pour des types de combustibles spécifiques sur la base des exigences données dans l’IEC 62282-6-101.
Tehnologije gorivnih celic - 6-101. del: Elektroenergetski sistemi z mikro gorivnimi celicami - Varnost - Splošne zahteve (IEC 62282-6-101:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62282-6-101:2024
01-junij-2024
Tehnologije gorivnih celic - 6-101. del: Elektroenergetski sistemi z mikro gorivnimi
celicami - Varnost - Splošne zahteve (IEC 62282-6-101:2024)
Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General
requirements (IEC 62282-6-101:2024)
Brennstoffzellentechnologien - Teil 6-101: Mikrobrennstoffzellen-Energiesysteme -
Sicherheit - Allgemeine Anforderungen (IEC 62282-6-101:2024)
Technologies des piles à combustible - Partie 6-101: Systèmes à micropiles à
combustible - Sécurité - Exigences générales (IEC 62282-6-101:2024)
Ta slovenski standard je istoveten z: EN IEC 62282-6-101:2024
ICS:
27.070 Gorilne celice Fuel cells
SIST EN IEC 62282-6-101:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62282-6-101:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 62282-6-101:2024
EUROPEAN STANDARD EN IEC 62282-6-101
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2024
ICS 27.070 Supersedes EN 62282-6-100:2010 (partially);
EN 62282-6-100:2010/A1:2012 (partially)
English Version
Fuel cell technologies - Part 6-101: Micro fuel cell power
systems - Safety - General requirements
(IEC 62282-6-101:2024)
Technologies des piles à combustible - Partie 6-101: Brennstoffzellentechnologien - Teil 6-101:
Systèmes à micropiles à combustible - Sécurité - Exigences Mikrobrennstoffzellen-Energiesysteme - Sicherheit -
générales Allgemeine Anforderungen
(IEC 62282-6-101:2024) (IEC 62282-6-101:2024)
This European Standard was approved by CENELEC on 2024-03-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62282-6-101:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62282-6-101:2024
EN IEC 62282-6-101:2024 (E)
European foreword
The text of document 105/1010/FDIS, future edition 1 of IEC 62282-6-101, prepared by IEC/TC 105
"Fuel cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62282-6-101:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-12-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-03-22
document have to be withdrawn
This document partially supersedes EN 62282-6-100:2010 and all of its amendments and corrigenda
(if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62282-6-101:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 31010 NOTE Approved as EN IEC 31010
IEC 60335-1:2020 NOTE Approved as EN IEC 60335-1:2023 (not modified)
IEC 60812 NOTE Approved as EN IEC 60812
IEC 61025 NOTE Approved as EN 61025
IEC 61508 (series) NOTE Approved as EN 61508 (series)
IEC 62061 NOTE Approved as EN IEC 62061
IEC 62282-5-100 NOTE Approved as EN IEC 62282-5-100
ISO 11114-1 NOTE
...
SLOVENSKI STANDARD
oSIST prEN IEC 62282-6-101:2023
01-marec-2023
Tehnologije gorivnih celic - 6-101. del: Elektroenergetski sistemi z mikro gorivnimi
celicami - Varnost - Splošne zahteve
Fuel cell technologies - Part 6-101: Micro fuel cell power systems - Safety - General
requirements
Technologies des piles à combustible - Partie 6-101: Systèmes à micropiles à
combustible - Sécurité - Exigences générales
Ta slovenski standard je istoveten z: prEN IEC 62282-6-101:2022
ICS:
27.070 Gorilne celice Fuel cells
oSIST prEN IEC 62282-6-101:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62282-6-101:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62282-6-101:2023
105/949/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62282-6-101 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-23 2023-03-17
SUPERSEDES DOCUMENTS:
105/807/CD, 105/821A/CC
IEC TC 105 : FUEL CELL TECHNOLOGIES
SECRETARIAT: SECRETARY:
Germany Mr David Urmann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
TITLE:
Fuel cell technologies – Part 6-101: Micro fuel cell power systems – Safety – General requirements
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62282-6-101:2023
– 2 – IEC CDV 62282-6-101 © IEC 2020
CONTENTS
1 Scope . 8
1.1 General. 8
1.2 Fuels and technologies covered . 8
1.3 Equivalent level of safety . 10
2 Normative references . 10
3 Terms and definitions . 10
3.1 air management system . 10
3.2 attached cartridge . 10
3.3 aqueous reservoir . 10
3.4 control system . 11
3.5 corrosive liquid . 11
3.6 electrical enclosure . 11
3.7 exterior cartridge . 11
3.8 fire enclosure . 11
3.9 flammable liquid . 11
3.10 flammable gas . 11
3.11 fuel . 11
3.12 fuel cartridge .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.