Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary precision potentiometers (IEC 60393-3:2023)

This part of IEC 60393 applies to rotary precision potentiometers for use in electronic equipment.
The object of this document is to prescribe preferred ratings and characteristics and to select
from IEC 60393-1, the appropriate quality assessment procedures, tests and measuring
methods and to give general performance requirements for this type of potentiometer.
This document gives the minimum performance requirements and test severities.

Potentiometer zur Verwendung in Geräten der Elektronik – Teil 3: Rahmenspezifikation: Drehpräzisionspotentiometer (IEC 60393-3:2023)

Potentiomètres utilisés dans les équipements électroniques - Partie 3: Spécification intermédiaire: Potentiomètres de précision rotatifs (IEC 60393-3:2023)

L’IEC 60393-3:2023 s’applique aux potentiomètres de précision rotatifs utilisés dans les équipements électroniques.
Le présent document a pour objet de prescrire les caractéristiques assignées et les caractéristiques préférentielles, de choisir dans l’IEC 60393-1 les procédures d’assurance de la qualité et les méthodes d’essai et de mesure appropriées, et de fixer les exigences de performance générales pour ce type de potentiomètres.
Le présent document fixe les exigences minimales de performance et les sévérités des essais.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) révision de toutes les parties du document en s’appuyant sur les Directives ISO/IEC, Partie 2:2018 (huitième édition) et harmonisation avec d’autres types de documents similaires;
b) organisation de la structure du document pour suivre la nouvelle structure de spécification intermédiaire décidée au sein du CE 40;
c) révision des informations relatives au niveau d’assurance de la qualité EZ (zéro non‑conformité).

Potenciometri za elektronsko opremo - 3. del: Področna specifikacija: Natančni rotacijski potenciometri (IEC 60393-3:2023)

Ta del standarda IEC 60393 se uporablja za natančne rotacijske potenciometre za elektronsko opremo. Cilj tega dokumenta je predpisati prednostne vrednosti in lastnosti, izbrati primerne postopke za ovrednotenje kakovosti, preskuse in merilne metode iz standarda IEC 60393-1 ter podati splošne zahteve glede zmogljivosti za ta tip potenciometra.
Ta dokument podaja minimalne zahteve glede zmogljivosti in preskusne stopnje.

General Information

Status
Published
Public Enquiry End Date
31-May-2022
Publication Date
16-Oct-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Oct-2023
Due Date
08-Dec-2023
Completion Date
17-Oct-2023

Buy Standard

Standard
EN IEC 60393-3:2023
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 60393-3:2022
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60393-3:2023
01-november-2023
Potenciometri za elektronsko opremo - 3. del: Področna specifikacija: Natančni
rotacijski potenciometri (IEC 60393-3:2023)
Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary
precision potentiometers (IEC 60393-3:2023)
Potentiometer zur Verwendung in Geräten der Elektronik – Teil 3: Rahmenspezifikation:
Drehpräzisionspotentiometer (IEC 60393-3:2023)
Potentiomètres utilisés dans les équipements électroniques - Partie 3: Spécification
intermédiaire: Potentiomètres de précision rotatifs (IEC 60393-3:2023)
Ta slovenski standard je istoveten z: EN IEC 60393-3:2023
ICS:
31.040.20 Potenciometri, spremenljivi Potentiometers, variable
upori resistors
SIST EN IEC 60393-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60393-3:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 60393-3:2023


EUROPEAN STANDARD EN IEC 60393-3

NORME EUROPÉENNE

EUROPÄISCHE NORM September 2023
ICS 31.040.20

English Version
Potentiometers for use in electronic equipment - Part 3:
Sectional specification: Rotary precision potentiometers
(IEC 60393-3:2023)
Potentiomètres utilisés dans les équipements électroniques Potentiometer zur Verwendung in Geräten der Elektronik -
- Partie 3: Spécification intermédiaire: Potentiomètres de Teil 3: Rahmenspezifikation: Drehpräzisionspotentiometer
précision rotatifs (IEC 60393-3:2023)
(IEC 60393-3:2023)
This European Standard was approved by CENELEC on 2023-09-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60393-3:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60393-3:2023
EN IEC 60393-3:2023 (E)
European foreword
The text of document 40/3058/FDIS, future edition 3 of IEC 60393-3, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60393-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-22
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
A preceding document on the subject covered by this specification has been:
— CECC 41400:1979
Endorsement notice
The text of the International Standard IEC 60393-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60915 NOTE Approved as EN 60915
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60393-3:2023
EN IEC 60393-3:2023 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. Fo
...

SLOVENSKI STANDARD
oSIST prEN IEC 60393-3:2022
01-maj-2022
Potenciometri za elektronsko opremo - 3. del: Področna specifikacija: natančni
rotacijski potenciometri
Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary
precision potentiometers
Potentiomètres utilisés dans les équipements électroniques - Partie 3: Spécification
intermédiaire: Potentiomètres de précision rotatifs
Ta slovenski standard je istoveten z: prEN IEC 60393-3:2022
ICS:
31.040.20 Potenciometri, spremenljivi Potentiometers, variable
upori resistors
oSIST prEN IEC 60393-3:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60393-3:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60393-3:2022


40/2924/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60393-3 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-03-18 2022-06-10
SUPERSEDES DOCUMENTS:
40/2867/CD, 40/2900/CC

IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.

TITLE:
Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary precision
potentiometers

PROPOSED STABILITY DATE: 2028

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60393-3:2022
60393-3/Ed3/CDV  IEC (E) – 2 – 40/2924/CDV
1 CONTENTS
2
3 FOREWORD . 4
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 6
7 4 Preferred characteristics . 7
8 4.1 General . 7
9 4.2 Style and dimensions . 7
10 4.2.1 Style . 7
11 4.2.2 Outline drawing and dimensions . 7
12 4.3 Preferred climatic categories. 8
13 4.4 Resistance law. 9
14 4.5 Nominal total resistance . 9
15 4.6 Tolerances on nominal total resistance . 9
16 4.7 Rated dissipation . 9
17 4.8 Limiting element voltage . 10
18 4.9 Insulation voltage . 10
19 4.10 Resolution (when applicable) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.