SIST EN 13877-2:2024

Concrete pavements - Part 2: Functional requirements for concrete pavements

This document specifies requirements for concrete pavements cast in situ. Concrete compacted by rollers is not covered by this document.
This document covers concrete pavements for roads, airfields, pedestrian footpaths, cycle tracks, storage areas, and in general for all traffic-bearing structures.

Fahrbahnbefestigungen aus Beton - Teil 2: Funktionale Anforderungen an Fahrbahnbefestigungen aus Beton

Dieses Dokument legt Anforderungen an Fahrbahnbefestigungen aus Beton fest, die am Einbauort hergestellt werden. Mit Walzen verdichteter Beton wird nicht in diesem Dokument behandelt.
Dieses Dokument behandelt Fahrbahnbefestigung aus Beton für Straßen, Flugplätze, Fußgängerwege, Fahrradwege, Lagerplätze und im Allgemeinen für sämtliche verkehrsbelastete Befestigungen.

Chaussées en béton - Partie 2 : Exigences fonctionnelles pour les chaussées en béton

Ce document spécifie les exigences pour les chaussées en béton coulé en place.
Le béton compacté au rouleau n'est pas couvert par ce document.
Ce document concerne les chaussées en béton pour routes, aérodromes, rues piétonnes, pistes cyclables, zones de stockage et, en général, pour toutes les structures supportant une circulation.

Betonska vozišča - 2. del: Funkcionalne zahteve za betonska vozišča

Ta dokument določa zahteve za betonska vozišča, ulita na kraju samem. Beton, utrjen z valji, ni obravnavan v tem dokumentu.
V tem dokumentu so obravnavana betonska vozišča za ceste, letalske steze, površine za pešce, kolesarske poti, območja skladiščenja in na splošno za vse strukture, po katerih poteka promet.

General Information

• Status: Published
• Public Enquiry End Date: 30-Mar-2022
• Publication Date: 10-Jan-2024
• ICS: 91.100.30 - Concrete and concrete products
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Dec-2023
• Due Date: 11-Feb-2024
• Completion Date: 11-Jan-2024
• Ref Project: EN 13877-2:2023 - Concrete pavements - Part 2: Functional requirements for concrete pavements

Relations

• Replaces: SIST EN 13877-2:2013 - Concrete pavements - Part 2: Functional requirements for concrete pavements
• Effective Date: 01-Feb-2024

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13877-2:2024
01-februar-2024
Nadomešča:
SIST EN 13877-2:2013
Betonska vozišča - 2. del: Funkcionalne zahteve za betonska vozišča
Concrete pavements - Part 2: Functional requirements for concrete pavements
Fahrbahnbefestigungen aus Beton - Teil 2: Funktionale Anforderungen an
Fahrbahnbefestigungen aus Beton
Chaussées en béton - Partie 2 : Exigences fonctionnelles pour les chaussées en béton
Ta slovenski standard je istoveten z: EN 13877-2:2023
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13877-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13877-2:2024

---------------------- Page: 2 ----------------------
SIST EN 13877-2:2024


EN 13877-2
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13877-2:2013
English Version

Concrete pavements - Part 2: Functional requirements for
concrete pavements
Chaussées en béton - Partie 2 : Exigences Fahrbahnbefestigungen aus Beton - Teil 2: Funktionale
fonctionnelles pour les chaussées en béton Anforderungen an Fahrbahnbefestigungen aus Beton
This European Standard was approved by CEN on 25 September 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13877-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13877-2:2024
EN 13877-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Symbols and abbreviated terms . 6
4 Functional requirements for concrete pavements . 7
4.1 General. 7
4.2 Strength of concrete pavements . 7
4.2.1 General. 7
4.2.2 Core compressive strength . 8
4.2.3 Core tensile splitting strength or tensile strength on cylindrical discs . 9
4.3 Thickness of concrete pavements . 11
4.3.1 General.
...