iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 13680:2020/prA1

(Amendment)

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions - Amendment 1: Petroleum and natural gas industries - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020/DAM 1:2023)

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions - Amendment 1: Petroleum and natural gas industries - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020/DAM 1:2023)

Erdöl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbeständigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre und Zusatzmaterial - Technische Lieferbedingungen - Änderung 1 (ISO 13680:2020/DAM 1:2023)

Industries du pétrole et du gaz naturel - Produits tubulaires sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production, tubes-ébauches pour manchons et matériau pour accessoires - Conditions techniques de livraison - Amendement 1: Titre manque (ISO 13680:2020/DAM 1:2023)

Industrija za predelavo nafte in zemeljskega plina - Nevarjeni cevasti izdelki iz korozijsko odpornih zlitin, ki se uporabljajo kot zaščitne, proizvodne in priključne cevi ter pribor - Tehnični dobavni pogoji - Dopolnilo A1: Industrija za predelavo nafte in zemeljskega plina - Nevarjeni izdelki iz korozijsko odpornih zlitin, ki se uporabljajo kot zaščitne, proizvodne in priključne cevi ter pribor - Tehnični dobavni pogoji (ISO 13680:2020/DAM 1:2023)

General Information

Status
Not Published
Publication Date
08-Dec-2024
ICS
75.180.10 - Exploratory, drilling and extraction equipment
77.140.75 - Steel pipes and tubes for specific use
Technical Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Drafting Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Current Stage
Ref Project
SIST EN ISO 13680:2020/oprA1:2023 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions - Amendment 1: Petroleum and natural gas industries - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020/DAM 1:2023)

Relations

Amends
EN ISO 13680:2020 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
Effective Date
16-Jan-2023

Buy Standard

EN ISO 13680:2020/oprA1:2023EN ISO 13680:2020/oprA1:2023
PreviousNext
Draft
EN ISO 13680:2020/oprA1:2023
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13680:2020/oprA1:2023
01-julij-2023
Industrija za predelavo nafte in zemeljskega plina - Nevarjeni cevasti izdelki iz
korozijsko odpornih zlitin, ki se uporabljajo kot zaščitne, proizvodne in priključne
cevi ter pribor - Tehnični dobavni pogoji - Dopolnilo A1: Industrija za predelavo
nafte in zemeljskega plina - Nevarjeni izdelki iz korozijsko odpornih zlitin, ki se
uporabljajo kot zaščitne, proizvodne in priključne cevi ter pribor - Tehnični
dobavni pogoji (ISO 13680:2020/DAM 1:2023)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular
products for use as casing, tubing, coupling stock and accessory material - Technical
delivery conditions - Amendment 1: Petroleum and natural gas industries - Corrosion-
resistant alloy seamless products for use as casing, tubing, coupling stock and
accessory material - Technical delivery conditions (ISO 13680:2020/DAM 1:2023)
Erdöl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbeständigen Legierungen
zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre und Zusatzmaterial -
Technische Lieferbedingungen - Änderung 1 (ISO 13680:2020/DAM 1:2023)
Industries du pétrole et du gaz naturel - Produits tubulaires sans soudure en acier allié
résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production, tubes-
ébauches pour manchons et matériau pour accessoires - Conditions techniques de
livraison - Amendement 1: Titre manque (ISO 13680:2020/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 13680:2020/prA1
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN ISO 13680:2020/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13680:2020/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 13680:2020/oprA1:2023
DRAFT AMENDMENT
ISO 13680:2020/DAM 1
ISO/TC 67/SC 5 Secretariat: JISC
Voting begins on: Voting terminates on:
2023-05-15 2023-08-07
Petroleum and natural gas industries — Corrosion-
resistant alloy seamless tubular products for use as casing,
tubing, coupling stock and accessory material — Technical
delivery conditions
AMENDMENT 1: Petroleum and natural gas industries —
Corrosion-resistant alloy seamless products for use as casing,
tubing, coupling stock and accessory material — Technical
delivery conditions
ICS: 77.140.75; 75.180.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 13680:2020/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 13680:2020/oprA1:2023

DRAFT AMENDMENT
ISO 13680:2020/DAM 1
ISO/TC 67/SC 5 Secretariat: JISC
Voting begins on: Voting terminates on:

Petroleum and natural gas industries — Corrosion-
resistant alloy seamless tubular products for use as casing,
tubing, coupling stock and accessory material — Technical
delivery conditions
AMENDMENT 1: Petroleum and natural gas industries —
Corrosion-resistant alloy seamless products for use as casing,
tubing, coupling stock and accessory material — Technical
delivery conditions
ICS: 77.140.75; 75.180.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 11960:2021(Main)
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
SIST EN ISO 11960:2021

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material.
By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses.
This document is applicable to the following connections:
—     short round thread casing (SC);
—     long round thread casing (LC);
—     buttress thread casing (BC);
—     non-upset tubing (NU);
—     external upset tubing (EU);
—     integral-joint tubing (IJ).
NOTE 1  For further information, see API Spec 5B.
For such connections, this document specifies the technical delivery conditions for couplings and thread protection.
NOTE 2  Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given in A.9 SR22.
This document can also be applied to tubulars with connections not covered by ISO or API standards.
This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80, C90, R95, T95, P110, C110 and Q125.
This document is not applicable to threading requirements.
NOTE 3  Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

  • Standard
    281 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13680:2020(Main)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
SIST EN ISO 13680:2020

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
—     PSL-1, which is the basis of this document;
—     PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1  The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
NOTE 2  For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3  Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a)   group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b)   group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c)   group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d)   group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e)   group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
NOTE 4  Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11961:2018(Main)
Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
SIST EN ISO 11961:2019

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this document. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades of drill-pipe:
—          grade E drill-pipe;
—          high-strength grades of drill-pipe, grades X, G and S;
—          enhanced H2S resistance drill pipe, grades D and F.
A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units (see Table C.1).
This document can also be used for drill-pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, this document can also be applied to other drill-pipe body and/or tool-joint dimensions. This document lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination (see Annex E).
This document does not consider performance properties, nor performance degradation of the product when in service.
NOTE 1    In this document, drill-pipe is designated by label 1, label 2, grade of material (E, X, G, S, D and F), upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering.
NOTE 2    Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading of drill-pipe tool joints.
NOTE 3    Reference can be made to API RP 7G for the performance properties of the drill-pipe.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11960:2021(Main)
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
SIST EN ISO 11960:2021

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material.
By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses.
This document is applicable to the following connections:
—     short round thread casing (SC);
—     long round thread casing (LC);
—     buttress thread casing (BC);
—     non-upset tubing (NU);
—     external upset tubing (EU);
—     integral-joint tubing (IJ).
NOTE 1  For further information, see API Spec 5B.
For such connections, this document specifies the technical delivery conditions for couplings and thread protection.
NOTE 2  Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given in A.9 SR22.
This document can also be applied to tubulars with connections not covered by ISO or API standards.
This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80, C90, R95, T95, P110, C110 and Q125.
This document is not applicable to threading requirements.
NOTE 3  Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

  • Standard
    281 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13680:2020(Main)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
SIST EN ISO 13680:2020

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
—     PSL-1, which is the basis of this document;
—     PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1  The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
NOTE 2  For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3  Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a)   group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b)   group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c)   group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d)   group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e)   group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
NOTE 4  Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11961:2018(Main)
Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
SIST EN ISO 11961:2019

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this document. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades of drill-pipe:
—          grade E drill-pipe;
—          high-strength grades of drill-pipe, grades X, G and S;
—          enhanced H2S resistance drill pipe, grades D and F.
A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units (see Table C.1).
This document can also be used for drill-pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, this document can also be applied to other drill-pipe body and/or tool-joint dimensions. This document lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination (see Annex E).
This document does not consider performance properties, nor performance degradation of the product when in service.
NOTE 1    In this document, drill-pipe is designated by label 1, label 2, grade of material (E, X, G, S, D and F), upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering.
NOTE 2    Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading of drill-pipe tool joints.
NOTE 3    Reference can be made to API RP 7G for the performance properties of the drill-pipe.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18134-2:2024(Main)
Solid biofuels - Determination of moisture content - Part 2: Simplified method (ISO 18134‑2:2024)
kSIST FprEN ISO 18134-2:2024

This document specifies a method of determining the moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision is not needed, e.g. for routine production control on site. The method described in this document is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
NOTE            Biomass materials can contain small amounts of volatile organic compounds (VOC) which can evaporate when determining moisture content by oven drying (see References [1] and [2]). The release of such compounds is quite small relative to the overall moisture content as determined by this method and is disregarded in this document.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day