prEN 17860-6
(Main)Carrier Cycles - Part 6: Passenger transport
Carrier Cycles - Part 6: Passenger transport
This document applies to the transportation of passengers on carrier cycles as defined in the other parts of this standard series.
Lastenfahrräder - Teil 6: Personentransport
Dieses Dokument gilt für den Transport von Mitfahrern in einer nach vorn oder hinten gerichteten Position auf einem Lastenfahrrad, wie in den anderen Teilen dieser Normenreihe festgelegt.
Dieses Dokument gilt nicht für den Transport von Kindern in einem Kindersitz, der nach EN14344:2022 geprüft wurde.
Dieses Dokument gilt für den beabsichtigten Fahrzweck (zum Pendeln und für Freizeitfahrten) mit moderatem Aufwand, siehe EN17406:2020+A1:2021.
ANMERKUNG Einige europäische Länder haben besondere Rechtsvorschriften für den Transport von Kindern auf Fahr
rädern. Eine Übereinstimmung mit diesem Dokument erfüllt diese Rechtsvorschriften ggf. nicht.
Cycles utilitaires - Partie 6 : Transport de passagers
Le présent document s’applique au transport de passagers face à l’avant ou face à l’arrière sur un cycle utilitaire tel que défini dans les autres parties de la présente série de normes.
Le présent document ne s’applique pas au transport d’enfants dans un siège enfant soumis à essai conformément à l’EN 14344:2022.
Le présent document s’applique au mode de conduite prévu, à savoir les déplacements quotidiens et les loisirs avec un effort modéré, voir l’EN 17406:2020+A1:2021.
NOTE Certains pays européens disposent d’une législation particulière relative au transport des enfants sur des cycles. La conformité avec le présent document peut ne pas garantir le respect de cette législation
Tovorna kolesa - 6. del: Prevoz potnikov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17860-6:2024
01-maj-2024
Tovorna kolesa - 6. del: Prevoz potnikov
Carrier Cycles - Part 6: Passenger transport
Lastenfahrräder - Teil 6: Personentransport
Cycles utilitaires - Partie 6 : Transport de passagers
Ta slovenski standard je istoveten z: prEN 17860-6
ICS:
43.150 Kolesa Cycles
oSIST prEN 17860-6:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17860-6:2024
---------------------- Page: 2 ----------------------
oSIST prEN 17860-6:2024
DRAFT
EUROPEAN STANDARD
prEN 17860-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2024
ICS 43.150
English Version
Carrier Cycles - Part 6: Passenger transport
Cycles utilitaires ¿- Partie 6 : Transport de passagers Lastenfahrräder - Teil 6: Personentransport
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 333.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17860-6:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17860-6:2024
prEN 17860-6:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Classification. 7
5 General requirements for testing . 7
5.1 Numbers and condition of specimens for the strength tests . 7
5.2 Accuracy tolerances of test conditions for brake tests and strength tests . 7
5.3 Fatigue test . 8
5.4 Fatigue test for composite components . 8
5.5 Plastic material test ambient temperature . 8
5.6 Crack detection methods . 8
6 General requirements for seats . 8
6.1 General.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.