Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007)

ISO 22721:2007 specifies requirements for rubber- or plastics-covered conveyor belting of textile construction for underground mining on flat or troughed idlers. It is not applicable to light conveyor belts as described in ISO 21183‑1. ISO 22721:2007 does not include requirements for plastics covers.

Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-Deckplatten für Anwendungen unter Tage (ISO 22721:2007)

Diese Internationale Norm legt Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-Deckplatten für Anwendungen unter Tage auf geraden oder gemuldeten Rollen fest. Sie gilt nicht für leichte Fördergurte nach ISO 21183-1.
Diese Internationale Norm enthält keine Anforderungen an Kunststoffabdeckungen. Diese müssen zwischen dem Hersteller und dem Käufer unter Berücksichtigung der Art des zu verwendenden Kunststoffs vereinbart werden.
Punkte, die nicht Anforderungen dieser Internationalen Norm darstellen, die aber zwischen Hersteller und Käufer vereinbart werden sollten, sind im informativen Anhang A enthalten.
In Anhang B sind Einzelheiten enthalten, die vom Käufer der Förderanlage zusammen mit einer Anfrage zur Verfügung gestellt werden sollten.
Die Fähigkeit eines Gurtes richtungsstabil zu laufen, kann nicht beurteilt werden, solange der Gurt nicht eingebaut ist. Diesbezügliche Anforderungen sind deshalb nicht Teil des Anwendungsbereiches dieser Internationalen Norm, allerdings werden in Anhang C Empfehlungen für die seitliche Drift gegeben.

Courroies transporteuses - Spécification pour courroies transporteuses à structure textile recouvertes de caoutchouc ou de plastique, pour utilisation dans les mines souterraines (ISO 22721:2007)

L'ISO 22721:2007 spécifie les exigences relatives aux courroies transporteuses à structure textile recouvertes de caoutchouc ou de plastique pour utilisation dans les mines souterraines, disposées sur rouleaux plats ou en auge. Elle ne s'applique pas aux courroies transporteuses légères. L'ISO 22721:2007 n'inclut pas les exigences relatives aux revêtements plastiques.

Naprave za kontinuirni transport - Trakovi tračnih transportejev - Zahteve za tračne transportne trakove z gumeno ali plastično oblogo ter tekstilnim vložkom za podzemno rudarstvo (ISO 22721:2007)

General Information

Status
Withdrawn
Publication Date
14-Jul-2007
Withdrawal Date
01-Aug-2023
Current Stage

Relations

Buy Standard

Standard
EN ISO 22721:2008
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22721:2008
01-maj-2008
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHMHY=DKWHYH]DWUDþQH
WUDQVSRUWQHWUDNRYH]JXPHQRDOLSODVWLþQRREORJRWHUWHNVWLOQLPYORåNRP]D
SRG]HPQRUXGDUVWYR ,62
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile
construction for underground mining (ISO 22721:2007)
Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-
Deckplatten für Anwendungen unter Tage (ISO 22721:2007)
Courroies transporteuses - Spécification pour courroies transporteuses à structure textile
recouvertes de caoutchouc ou de plastique, pour utilisation dans les mines souterraines
(ISO 22721:2007)
Ta slovenski standard je istoveten z: EN ISO 22721:2007
ICS:
53.040.20
73.100.40
SIST EN ISO 22721:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 22721
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2007
ICS 53.040.20; 73.100.40

English Version
Conveyor belts - Specification for rubber- or plastics-covered
conveyor belts of textile construction for underground mining
(ISO 22721:2007)
Courroies transporteuses - Spécification pour courroies Fördergurte - Anforderungen an Textilfördergurte mit
transporteuses à structure textile recouvertes de Gummi- oder Kunststoff-Deckplatten für Anwendungen
caoutchouc ou de plastique, pour utilisation dans les mines unter Tage (ISO 22721:2007)
souterraines (ISO 22721:2007)
This European Standard was approved by CEN on 20 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22721:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 22721:2007 (E)





Foreword


This document (EN ISO 22721:2007) has been prepared by Technical Committee CEN/TC 188
"Conveyor belts", the secretariat of which is held by BSI, in collaboration with Technical
Committee ISO/TC 41 "Pulleys and belts (including veebelts)".

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2008, and conflicting national
standards shall be withdrawn at the latest by January 2008.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 22721
First edition
2007-07-15

Conveyor belts — Specification for
rubber- or plastics-covered conveyor
belts of textile construction for
underground mining
Courroies transporteuses — Spécification pour courroies
transporteuses à structure textile recouvertes de caoutchouc ou de
plastique, pour utilisation dans les mines souterraines




Reference number
ISO 22721:2007(E)
©
ISO 2007

---------------------- Page: 4 ----------------------

ISO 22721:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.