prEN 16613

Glass in building - Laminated glass and laminated safety glass - Determination of interlayer viscoelastic properties

This document specifies a test method for determining the mechanical viscoelastic properties of interlayer materials. The interlayers under examination are those used in the production of laminated glass or laminated safety glass. The shear characteristics of interlayers are needed to design laminated glass in accordance with EN 16612:2019 and CEN/TS 19100 series.
Parameters of the Prony series, widely used in numerical simulation, can be derived from the measurements in Annex C.

Glas im Bauwesen - Verbundglas und Verbundsicherheitsglas - Bestimmung der viskoelastischen Eigenschaften von Zwischenschichten

Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Détermination des propriétés viscoélastiques des intercalaires

Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - Določevanje mehanskih lastnosti vmesnih slojev

General Information

• Status: Not Published
• Publication Date: 22-Jan-2026
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 3 - Laminated glass
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 15-Feb-2024
• Due Date: 06-Sep-2024
• Completion Date: 15-Feb-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Ref Project: oSIST prEN 16613:2024 - Glass in building - Laminated glass and laminated safety glass - Determination of interlayer viscoelastic properties

Relations

• Revises: EN 16613:2019 - Glass in building - Laminated glass and laminated safety glass - Determination of interlayer viscoelastic properties
• Effective Date: 24-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16613:2024
01-april-2024
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - Določevanje
mehanskih lastnosti vmesnih slojev
Glass in building - Laminated glass and laminated safety glass - Determination of
interlayer viscoelastic properties
Glas im Bauwesen - Verbundglas und Verbundsicherheitsglas - Bestimmung der
viskoelastischen Eigenschaften von Zwischenschichten
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Détermination
des propriétés viscoélastiques des intercalaires
Ta slovenski standard je istoveten z: prEN 16613
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 16613:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16613:2024

---------------------- Page: 2 ----------------------
oSIST prEN 16613:2024


DRAFT
EUROPEAN STANDARD
prEN 16613
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 81.040.20 Will supersede EN 16613:2019
English Version

Glass in building - Laminated glass and laminated safety
glass - Determination of interlayer viscoelastic properties
Verre dans la construction - Verre feuilleté et verre Glas im Bauwesen - Verbundglas und
feuilleté de sécurité - Détermination des propriétés Verbundsicherheitsglas - Bestimmung der
viscoélastiques des intercalaires viskoelastischen Eigenschaften von Zwischenschichten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16613:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16613:2024
prEN 16613:2024 (E)

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 7
5 Test procedure . 10
5.1 General. 10
5.2 Test specimens . 11
5.3 Test method .
...