This document specifies the testing methodology to be used for glass products that are claiming fire resistance. The methodology covers Type Testing as defined in the relevant glass product standard.
NOTE   This document provides guidance with the declaration of the characteristic, Safety in case of fire − Resistance to fire (for glass for use in a glazed assembly intended specifically for fire resistance) for the CE marking.
The same methodology can also be used to determine the performance cla...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a test method for determining the mechanical viscoelastic properties of interlayer materials. The interlayers under examination are those used in the production of laminated glass and/or laminated safety glass.  The interlayer properties are needed in order to determine the load resistance of laminated glass in accordance with prEN 16612 [1].
From the tensile modulus in particular conditions of temperature and load duration, an interlayer can be placed into a fa...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day

This European Standard gives a method of determining the design value of the bending strength of glass. It gives:
- the general method of calculation, and
- guidance for lateral load resistance of linearly supported glazed elements used as infill panels;
NOTE   Examples of lateral loads are wind loads and snow loads and self weight of sloping glass and climatic loads on insulating glass units.
This standard gives recommended values for the following factors for glass as a material:
-  materia...
view more

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard covers all life cycle stages, from cradle to grave, namely product stage, construction process stage, use stage and end-of-life stage of glass products (see point 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.), from cradle to gate. It covers raw materials and energy supply, transport, f...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This document covers all life cycle stages, from cradle to grave, namely product stage, construction process stage, use stage and end-of-life stage of glass products (see Clause 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.), from cradle to gate. It covers raw materials and energy supply, transport, flat glass...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This document gives a method of determining the design value of the bending strength of glass. It gives:the general method of calculation, and guidance for lateral load resistance of linearly supported glazed elements used as infill panels
NOTE   Examples of lateral loads are wind loads, snow loads, self weight of sloping glass, and cavity pressure variations on insulating glass units.
This document gives recommended values for the following factors for glass as a material:
- material partial f...
view more

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      55 pages
      English language
    • e-Library read for
      1 day

This document specifies a test method for determining the mechanical viscoelastic properties of interlayer materials. The interlayers under examination are those used in the production of laminated glass and/or laminated safety glass. The interlayer viscoelastic properties are needed in order to determine the load resistance of laminated glass.
From the tensile modulus in particular conditions of temperature and load duration, an interlayer can be placed into a family that relates to a specific...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance ...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance ...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day

This draft European Standard specifies a procedure for determining the emissivity at room temperature of the surfaces of glass, coated glass and other glazing components not transparent in the far infrared. The emissivity is necessary for taking into account heat transfer by radiation from surfaces at the standard temperature of 283 K in the determination of the U value and of the total solar transmittance of glazing according to B.1 to B.5.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies a procedure for determining the emissivity at room temperature of the surfaces of glass and coated glass.
The emissivity is necessary for taking into account heat transfer by radiation from surfaces at the standard temperature of 283 K in the determination of the U value and of the total solar transmittance of glazing according to [1] to [4].
The procedure, being based on spectrophotometric regular reflectance measurements at near normal incidence on materials that are ...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a) in accordance with prEN 1279-1:2015 and prEN 1279-6:2015 or
b) for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard (all parts) covers the requirements for insulating glass units. The main intended uses of the insulating glass units are installations in windows, doors, curtain walling, structural sealant glazing, roofs and partitions.
The achievement of the requirements of this standard indicates that insulating glass units fulfil the needs for intended use and ensures by means of the evaluation of conformity to this standard that, visual, energetic, acoustic, safety parameters do not ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the routine factory production control, the periodic testing and inspection and test methods to verify that an insulating glass unit (IGU) conforms to the system description.

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and describes the test methods for edge seal components and inserts. This includes the identification, the determination of physical attributes and the evaluation of characteristics for use in substitution rules in accordance with prEN 1279-1:2015.
For the purpose to demonstrate that edge seal components will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6, prEN 1279-2:2015 and prEN 1279-3:2015 ...
view more

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of gas leakage rate and specifies the requirements for limit values for gas leakage rate and gas concentration for gas filled insulating glass units made
a) in accordance with prEN 1279-1:2015 and prEN 1279-6:2015 or
b) for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in prEN 1279-1:2015, Clause 6.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of insulating glass units (IGU) for use in buildings.
NOTE 1    For glass products with electrical wiring or connections for e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
NOTE 2   Units for which the intended use is only ‘artistic’ and therefore no essential requirement is required, are not subject to CE marking and are not part of this standard.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This European Standard describes the test method for the determination of gas leakage rate and specifies the requirements for limit values for gas leakage rate and gas concentration for gas filled insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018, or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day

This document covers the product standard of insulating glass units (IGU) for use in buildings.
Units for which the intended use is only artistic and therefore no essential characteristics are required, are not subject to CE marking and are not part of this standard.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This document describes the routine factory production control, the periodic testing and inspection and test methods to verify that an insulating glass unit (IGU) conforms to the system description.

    • sale 10% off
    • Draft
      49 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      56 pages
      English language
    • e-Library read for
      1 day

This document (all parts) covers the requirements for insulating glass units. The main intended uses of the insulating glass units are installations in windows, doors, curtain walling, bonded glazing for doors, windows and curtain walling, roofs and partitions.
The achievement of the requirements of this standard indicates that insulating glass units fulfil the needs for intended use and ensures by means of the evaluation of conformity to this standard that, visual, energetic, acoustic, safety ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and describes the test methods for edge seal components and inserts. This includes the identification, the determination of physical attributes and the evaluation of characteristics for use in substitution rules in accordance with EN 1279 1:2018.
For the purpose to demonstrate that edge seal components will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6, EN 1279 2:2018 and EN 1279 3:2018 also apply.

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of basic alumino silicate glass products for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard covers electrically operated metal fans for chimneys that are able to create a stable positive or negative pressure for the chimney.
This European Standard covers fans installed inline in the connecting flue pipe (inline fans) or mounted on the chimney outlet (exhaust fans).
This standard excludes chimney cowls (Terminals with aerodynamic characteristics).

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the assessment and verification of constancy of performance and the factory production control of basic alumino silicate glass products for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of EN 572 specific to each product type:
-   EN 572-2   Float glass;
-   EN 572-3   Polished wir...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for basic soda lime silicate glass products, as defined in EN 572-1:2012, for use in building. It applies to supplied sizes or cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m².
This European Standard does not apply to float glass supplied as jumbo, split sizes or overs...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for basic soda lime silicate glass products, as defined in EN 572-1:2012, for use in building. It applies to supplied sizes or cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m².
This European Standard does not apply to float glass supplied as jumbo, split sizes or overs...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies and classifies basic glass products and indicates their chemical composition, their main physical and mechanical characteristics and defines their general quality criteria.
Specific dimensions and dimensional tolerances, description of faults, quality limits and designation for each basic product type are not included in this Part, but are given in other Parts of EN 572 specific to each product type:
-   EN 572-2   Float glass;
-   EN 572-3   Polished wir...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults).
This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use.
This European Standard does not apply to final cut sizes having a di...
view more

    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

EN 13022-1 specifies requirements for the suitability for use of supported and unsupported glass products for use in “Structural Sealant Glazing” (SSG) applications. Four schematic drawings of SSG systems are shown in Figure 1 and three section drawings of an SSG type II system are shown in Figure 2 for illustration purposes. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability...view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

EN 13022-2 deals with the assembling and bonding of glass elements in a frame, window, door or curtain walling construction, or directly into the building by means of structural bonding of the glass element into or onto framework or directly into the building. It gives information to the assembler to enable him to organise his work and comply with requirements regarding quality control. Structural sealant glazing can be incorporated into the façades (curtain walls, doors and windows) or roofs as...view more

    • sale 10% off
    • Draft
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in Structural Sealant Glazing (SSG) applications. Four schematic drawings of SSG systems are shown in Figure 1 and three section drawings of an SSG type II system are shown in Figure 2 for illustration purposes. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the s...view more

    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with the assembling and bonding of glass elements in a frame, window, door or curtain walling construction, or directly into the building by means of structural bonding of the glass element into or onto framework or directly into the building.
It gives information to the assembler to enable him to organize his work and comply with requirements regarding quality control.
Structural sealant glazing can be incorporated into the façades (curtain walls, doors and window...
view more

    • sale 10% off
    • Draft
      40 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

EN 15683-2 covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate channel shaped safety glass for use in buildings. This also includes requirements subject to regulation.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard covers the evaluation of conformity and the factory production control of thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
This also includes requirements subject to regulation.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings. Information on curved heat soak thermally toughened alkaline earth silicate safety glass is given in Annex B, but this product does not form part of this document. Other requirements, not specified in this document, can apply...view more

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings. Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the ...view more

    • sale 10% off
    • Draft
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings. For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings.
For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the heat soak process system together with tolerances flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened alkaline earth silicate safety glass for use in buildings. Information on curved heat soak thermally toughened alkaline earth silicate safety glass is given in Annex B, but this product does not form part of this document.
Other requirements, not specified in this document, can appl...
view more

    • sale 10% off
    • Draft
      43 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the...
view more

    • sale 10% off
    • Draft
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of visual and wire faults) for channel shaped glass, as defined in FprEN 572-1:2011, for use in building. This European Standard covers channel shaped glass supplied in stock sizes and final cut sizes.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of visual and pattern faults) for patterned glass as defined in FprEN 572-1:2011, for use in building. This European Standard applies only to patterned glass supplied in rectangular panes and in stock sizes. EN 572-8 gives information on patterned glass in sizes other than those covered by this European Standard.

    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass, as defined in FprEN 572-1:2011, for use in building. This European Standard applies only to wired patterned glass supplied in rectangular panes and in stock sizes. EN 572-8 gives information on patterned wired glass in sizes other than those covered by this European Standard.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of optical, visual and wire faults) for polished wired glass, as defined in FprEN 572-1:2011, for use in building. This European Standard applies only to polished wired glass supplied in rectangular panes and in stock sizes. EN 572-8 gives information on polished wired glass in sizes other than those covered by this European Standard.

    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass, as defined in FprEN 572-1:2011, for use in building. This European Standard applies only to float glass supplied in jumbo sizes split sizes and oversize plates.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for drawn sheet glass, as defined in FpEN 572-1:2011, for use in building. This European Standard applies only to drawn sheet glass supplied in rectangular panes and in stock sizes. EN 572-8 gives information on drawn sheet glass in sizes other than those covered by this European Standard.

    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for drawn sheet glass, as defined in EN 572-1:2012, for use in building.
This European Standard applies only to drawn sheet glass supplied in rectangular panes and in stock sizes.
EN 572-8 gives information on drawn sheet glass in sizes other than those covered by this European Standard.

    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day