FprEN 17038-3

Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and verification - Part 3: Testing and calculation of energy efficiency index (EEI) of booster sets

The proposed Part 3 of the Standard on energy efficiency index (EEI) of pump units focusses on booster sets.
Part 3 will give special definitions  (e.g. a reference flow-time profile, a reference pressure control and - in the case of multipump booster sets - a reference switching control and a reference electric power input) that have to be applied when determining their energy efficiency index (EEI).
It will describe two methods and procedures how to determine the energy efficiency index (EEI) of booster sets in the frame of qualification or verification.

Pumpen - Kreiselpumpen - Methoden zur Qualifikation und Verifikation - Teil 3: Prüfung und Berechnung des Energieeffizienzindexes (EEI) von Druckerhöhungsanlagen

Pompes - Pompes rotodynamiques - Indice de rendement énergétique - Méthodes de qualification et de vérification - Partie 3 : Essai et calcul de l’indice de rendement énergétique (EEI) des groupes de surpression

Le présent document spécifie les méthodes et procédures d’essai, de calcul et de détermination de l’indice de rendement énergétique (EEI) des groupes de surpression.
Un groupe de surpression se présente sous la forme soit d’un groupe motopompe individuel, soit d’un assemblage de groupes motopompes raccordés en parallèle avec une puissance hydraulique maximale de 150 kW et un débit nominal d’au moins 6 m³/h (0,001 667 m³/s), destiné à être utilisé avec un disconnecteur hydraulique et des composants supplémentaires influençant les performances hydrauliques, ainsi qu’avec les composants nécessaires pour contrôler la pression ou assurer un écoulement dans les boucles ouvertes à l’intérieur de bâtiments, et qui est commercialisé et/ou mis en service en tant que produit individuel conçu pour le pompage d’eau propre et sans fonctionnalité d’auto-amorçage.

Črpalke - Rotodinamične črpalke - Indeks energijske učinkovitosti - Metode za kvalifikacijo in verifikacijo - 3. del: Preskušanje in izračun indeksa energijske učinkovitosti (EEI) ojačevalnikov

General Information

• Status: Not Published
• Publication Date: 19-Mar-2020
• Withdrawal Date: 20-Sep-2020
• ICS: 23.080 - Pumps
• Technical Committee: CEN/TC 197 - Pumps
• Drafting Committee: CEN/TC 197/SC 3/WG 1 - Water pumps efficiency
• Current Stage: 5098 - Decision to abandon - Formal Approval
• Completion Date: 14-May-2020
• Ref Project: kSIST FprEN 17038-3:2019 - Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and verification - Part 3: Testing and calculation of ener-gy efficiency index (EEI) of booster sets

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17038-3:2018
01-marec-2018
ýUSDONH5RWRGLQDPLþQHþUSDONH,QGHNVHQHUJLMVNHXþLQNRYLWRVWL0HWRGH]D
NYDOLILNDFLMRLQYHULILNDFLMRGHO3UHVNXãDQMHLQL]UDþXQLQGHNVDHQHUJLMVNH
XþLQNRYLWRVWL((,RMDþHYDOQLNRY
Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and
verification - Part 3: Testing and calculation of ener-gy efficiency index (EEI) of booster
sets
Pumpen - Kreiselpumpen - Methoden zur Qualifikation und Verifikation - Teil 3: Prüfung
und Berechnung des Energieeffizienzindexes (EEI) von Druckerhöhungsanlagen
Pompes - Pompes rotodynamiques - Indice de rendement énergétique - Méthodes de
qualification et de vérification - Partie 3 : Essai et calcul de l’indice de rendement
énergétique (EEI) des groupes de surpression
Ta slovenski standard je istoveten z: prEN 17038-3
ICS:
23.080 ýUSDONH Pumps
oSIST prEN 17038-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17038-3:2018

---------------------- Page: 2 ----------------------
oSIST prEN 17038-3:2018


DRAFT
EUROPEAN STANDARD
prEN 17038-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2017
ICS 23.080
English Version

Pumps - Rotodynamic Pumps - Energy efficiency Index -
Methods of qualification and verification - Part 3: Testing
and calculation of ener-gy efficiency index (EEI) of booster
sets
Pompes - Pompes rotodynamiques - Indice de Pumpen - Kreiselpumpen - Methoden zur Qualifikation
rendement énergétique - Méthodes de qualification et und Verifikation - Teil 3: Prüfung und Berechnung des
de vérification - Partie 3 : Essai et calcul de l'indice de Energieeffizienzindexes (EEI) von
rendement énergétique (EEI) des groupes de Druckerhöhungsanlagen
surpression
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 197.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17038-3:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17038-3:2018
prEN 17038-3:2017 (E)
Contents

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and units . 7
3.1 Terms and definitions . 7
3.2 Symbols and units . 9
4 General conditions for
...