Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)

ISO 9073-18:2007 specifies a grab tensile test procedure for determining the breaking strength and elongation of most nonwoven materials. It includes instructions for the testing of wet specimens.
This grab tensile test procedure is applicable for most nonwovens, but is not recommended for nonwovens which have a high percentage of stretch.

Textilien - Prüfverfahren für Vliesstoffe - Teil 18: Bestimmung der Höchstzugkraft und der Höchstzugkraftdehnung von Vliesstoffen mit dem Grab-Zugversuch (ISO 9073-18:2007)

Dieser Teil der ISO 9073 legt ein Verfahren für den Grab-Zugversuch fest, mit dem die Reißfestigkeit und die
Höchstzugkraftdehnung der meisten Vliesstoffe bestimmt werden können. Anweisungen zur Prüfung nasser
Messproben sind enthalten.
Dieses Verfahren des Grab-Zugversuchs ist auf die meisten Vliesstoffe anwendbar, wird jedoch für Vliesstoffe
mit einer hohen Dehnbarkeit nicht empfohlen.

Textiles - Méthodes d'essai pour nontissés - Partie 18: Détermination de la résistance à la rupture et de l'allongement de matériaux nontissés par l'essai de traction à l'arrachement (ISO 9073-18:2007)

L'ISO 9073-18:2007 spécifie l'essai de traction à l'arrachement et permet de déterminer la résistance à la rupture et l'allongement de la plupart des matériaux nontissés. Elle inclut des instructions relatives aux essais d'éprouvettes mouillées.
Ce mode opératoire d'essai de traction à l'arrachement est applicable à la plupart des nontissés, mais il est déconseillé pour les nontissés ayant un pourcentage élevé d'allongement.

Tekstilije - Metode preskušanja vlaknovin - 18. del: Določanje pretržne sile in raztezka netkanih materialov z uporabo nateznega preskusa (grab tensile test) (ISO 9073-18:2007)

General Information

Status
Withdrawn
Publication Date
06-May-2008
Withdrawal Date
28-Nov-2023
Current Stage

Relations

Buy Standard

Standard
EN ISO 9073-18:2008
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9073-18:2008
01-september-2008
7HNVWLOLMH0HWRGHSUHVNXãDQMDYODNQRYLQGHO'RORþDQMHSUHWUåQHVLOHLQ
UD]WH]NDQHWNDQLKPDWHULDORY]XSRUDERQDWH]QHJDSUHVNXVD JUDEWHQVLOHWHVW
,62
Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and
elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)
Textilien - Prüfverfahren für Vliesstoffe - Teil 18: Bestimmung der Höchstzugkraft und der
Höchstzugkraftdehnung von Vliesstoffen mit dem Grab-Zugversuch (ISO 9073-18:2007)
Textiles - Méthodes d'essai pour nontissés - Partie 18: Détermination de la résistance à
la rupture et de l'allongement de matériaux nontissés par l'essai de traction à
l'arrachement (ISO 9073-18:2007)
Ta slovenski standard je istoveten z: EN ISO 9073-18:2008
ICS:
59.080.30 Tkanine Textile fabrics
SIST EN ISO 9073-18:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9073-18:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 9073-18:2008
EUROPEAN STANDARD
EN ISO 9073-18
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 59.080.30

English Version
Textiles - Test methods for nonwovens - Part 18: Determination
of breaking strength and elongation of nonwoven materials using
the grab tensile test (ISO 9073-18:2007)
Textiles - Méthodes d'essai pour nontissés - Partie 18: Textilien - Prüfverfahren für Vliesstoffe - Teil 18:
Détermination de la résistance à la rupture et de Bestimmung der Höchstzugkraft und der
l'allongement de matériaux nontissés par l'essai de traction Höchstzugkraftdehnung von Vliesstoffen mit dem Grab-
à l'arrachement (ISO 9073-18:2007) Zugversuch (ISO 9073-18:2007)
This European Standard was approved by CEN on 12 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9073-18:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9073-18:2008
EN ISO 9073-18:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9073-18:2008
EN ISO 9073-18:2008 (E)
Foreword
The text of ISO 9073-18:2007 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 9073-18:2008 by
Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9073-18:2007 has been approved by CEN as a EN ISO 9073-18:2008 without any
modification.

3

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.