EN 943-1:2015/FprA1:2018

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits

This European Standard specifies the minimum requirements, test methods, marking and information supplied by the manufacturer for ventilated and non-ventilated gas-tight chemical protective suits.
It specifies full body personal protective ensembles to be worn for protection against solid, liquid and gaseous chemicals, including liquid and solid aerosols.
This standard does not establish minimum criteria for protection for non-chemical hazards, e.g. radiological, fire, heat, explosive, infective agents. This type of equipment is not intended for total immersion in liquids.
The seams, joins and assemblages attaching the accessories are included within the scope of this standard. This standard specifies only supplementary requirements for components. The basic performance criteria for the components gloves, boots or respiratory protective equipment are given in other European Standards.
Particulate protection is limited to physical penetration of the particulates only.

Schutzkleidung gegen gefährliche feste, flüssige und gasförmige Chemikalien, einschließlich Flüssigkeitsaerosole und feste Partikel - Teil 1: Leistungsanforderungen für Typ 1 (gasdichte) Chemikalienschutzkleidung

Diese Europäische Norm legt die Mindestanforderungen, Prüfverfahren, Kennzeichnung und Informationen des Herstellers für belüftete und nicht belüftete gasdichte Chemikalienschutzanzüge fest.
Sie legt die persönliche Ganzkörper-Schutzkleidung fest, die zum Schutz gegenfesten, flüssigen und gasförmigen Chemikalien, einschließlich flüssiger und fester Aerosole, zu tragen ist.
Diese Norm stellt keine Mindestkriterien zum Schutz vor nicht-chemischen Gefahren auf, wie z. B. Radioaktivität, Feuer, Hitze, Explosionen, infektiöse Agenzien. Diese Art der Ausrüstung ist nicht für das vollständige Eintauchen in Flüssigkeiten gedacht.
Nähte, Verbindungen und Verbünde zum Anbringen der Zubehörteile werden durch den Anwendungsbereich dieser Norm erfasst. Diese Norm legt nur ergänzende Anforderungen an Komponenten fest. Die grundlegenden Leistungskriterien für die Bestandteile der Handschuhe, Schuhe oder Atemschutzgeräte werden durch andere Europäische Normen bereitgestellt.
Der Schutz vor Partikeln ist ausschließlich auf die Penetration von Partikeln beschränkt.

Habillement de protection contre les produits chimiques dangereux solides, liquides et gazeux, y compris les aérosols liquides et les particules solides - Partie 1: Exigences de performance des combinaisons de protection chimique étanches aux gaz (type 1)

La présente Norme européenne définit les exigences minimales, les méthodes d’essai, le marquage ainsi que les informations à fournir par le fabricant concernant les combinaisons de protection chimique ventilées et non-ventilées étanches au gaz suivantes.
Elle décrit les combinaisons de protection individuelle devant être portées dans le cadre de réactions dangereuses de matériaux, se présentant uniquement sous forme liquide, gazeuse et de particules.
La présente norme n'établit pas de critères minimum pour la protection contre les dangers non chimiques, par exemple les risques radiologiques, d’incendie, d’explosion ou liés à la chaleur. Ce type d'équipement n'est pas prévu pour une immersion totale dans des liquides.
Les coutures, les jonctions et les assemblages servant à fixer les accessoires sont inclus dans le domaine d'application de la présente norme. Les critères de performance de base pour les accessoires, c'est-à-dire les gants, les bottes ou les équipements de protection respiratoire sont définis dans d'autres Normes européennes.

Varovalna obleka pred nevarnimi trdnimi, tekočimi in plinastimi kemikalijami, vključno s tekočimi aerosoli in trdnimi delci - 1. del: Varnostne zahteve za varovalno oblačilo tipa 1 (neprepustno za plin) pred kemikalijami - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 13.340.10 - Protective clothing
• Technical Committee: CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
• Drafting Committee: CEN/TC 162/WG 3 - Protective clothing against chemicals, infective agents and radioactive contamination
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 16-Aug-2018
• Due Date: 20-Jul-2019
• Completion Date: 16-Aug-2018
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: SIST EN 943-1:2015/kprA1:2018 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits

Relations

• Merged Into: EN 943-1:2015+A1:2019 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
• Effective Date: 31-Oct-2018
• Amends: EN 943-1:2015 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
• Effective Date: 03-May-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 943-1:2015/oprA1:2017
01-oktober-2017
9DURYDOQDREOHNDSUHGQHYDUQLPLWUGQLPLWHNRþLPLLQSOLQDVWLPLNHPLNDOLMDPL
YNOMXþQRVWHNRþLPLDHURVROLLQWUGQLPLGHOFLGHO9DUQRVWQH]DKWHYH]D
YDURYDOQRREODþLORWLSDQHSUHSXVWQR]DSOLQSUHGNHPLNDOLMDPL'RSROQLOR$
Protective clothing against dangerous solid, liquid and gaseous chemicals, including
liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight)
chemical protective suits
Schutzkleidung gegen gefährliche feste, flüssige und gasförmige Chemikalien,
einschließlich Flüssigkeitsaerosole und feste Partikel - Teil 1: Leistungsanforderungen
für Typ 1 (gasdichte) Chemikalienschutzkleidung
Habillement de protection contre les produits chimiques dangereux solides, liquides et
gazeux, y compris les aérosols liquides et les particules solides - Partie 1: Exigences de
performance des combinaisons de protection chimique étanches aux gaz (type 1)
Ta slovenski standard je istoveten z: EN 943-1:2015/prA1:2017
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN 943-1:2015/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 943-1:2015/oprA1:2017

---------------------- Page: 2 ----------------------

SIST EN 943-1:2015/oprA1:2017


DRAFT
EUROPEAN STANDARD
EN 943-1:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
August 2017
ICS 13.340.10
English Version

Protective clothing against dangerous solid, liquid and
gaseous chemicals, including liquid and solid aerosols -
Part 1: Performance requirements for Type 1 (gas-tight)
chemical protective suits
Habillement de protection contre les produits Schutzkleidung gegen gefährliche feste, flüssige und
chimiques dangereux solides, liquides et gazeux, y gasförmige Chemikalien, einschließlich
compris les aérosols liquides et les particules solides - Flüssigkeitsaerosole und feste Partikel - Teil 1:
Partie 1: Exigences de performance des combinaisons Leistungsanforderungen für Typ 1 (gasdichte)
de protection chimique étanches aux gaz (type 1) Chemikalienschutzkleidung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 162.

This draft amendment A1, if approved, will modify the European Standard EN 943-1:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 943-1:2015/prA1:2017:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 943-1:2015/oprA1:2017
EN 943-1:2015/prA1:2017 (E)
Contents
European foreword . 4
1 Modification to Clause 1, Scope . 5
2 Modifcation to Clause 2 (and whole document) . 5
3 Modification to Clause 3, Terms and definition . 5
4 Modification to 4.1 . 5
5 Mod
...