FprEN 1459-1

Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks

This document specifies the safety requirements of self-propelled rough-terrain variable-reach trucks (hereafter referred to as trucks), intended to handle loads, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is fitted.
For the purpose of this document, rough-terrain variable-reach trucks are designed to transport, lift and place loads and can be driven on unimproved terrain.
Fork arms are considered to be part of the truck. Trucks can also be equipped with a variety of attachments (e.g. bale spikes, mowers, sweepers).
This document deals with all the significant hazards, hazardous situations and events relevant to the trucks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document does not apply to:
—   slewing rough-terrain variable-reach trucks covered by EN 1459 2:2015+A1:2018;
—   rough terrain variable-reach tractors covered by CEN/TS1459-8;
—   industrial variable reach trucks covered by EN ISO 3691 2:2016;
—   lorry-mounted variable-reach trucks covered by ISO 20297 1:2017;
—   variable-reach trucks fitted with tilting or elevating operator position;
—   mobile cranes covered by EN 13000:2010+A1:2014;
—   machines designed primarily for earth moving, even if their buckets and blades are replaced with forks (see EN 474 series);
—   trucks designed primarily with variable length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions;
—   trucks designed primarily for container handling;
—   trucks on tracks;
—   trucks with articulated chassis;
—   attachments.
This document does not address sound power level.
This document does not address hazards linked to:
—   operation of the truck from a position other than the normal operating position or the remote control;
—   hybrid power systems;
—   gas power systems;
—   gasoline engine systems;
—   battery power systems.
This document does not address hazards which may occur:
a)   when handling suspended loads which may swing freely (additional requirements are given in EN 1459 4: 2020);
b)   when using trucks on public roads;
c)   when operating in potentially explosive atmospheres (additional requirements are given in EN 1755:2015);
d)   when operating underground;
e)   when towing trailers;
f)   when fitted with a personnel work platform (additional requirements are given in EN 1459 3:2015 and EN 1459 9:2021);
g)   when using systems capable of controlling the speed of the truck as set by the operator (cruise-control).
This document does not provide a method of calculation for fatigue and strength of material.
This document is not applicable to trucks manufactured before the date of its publication.

Geländegängige Stapler - Sicherheitstechnische Anforderungen und Verifizierung - Teil 1: Stapler mit veränderlicher Reichweite

Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 1 : Chariots à portée variable

Vozila za talni transport - Terenska vozila - Varnostne zahteve in preverjanje - 1. del: Vozila z mehanizmom za dviganje s spremenljivim dosegom

General Information

• Status: Not Published
• Publication Date: 01-Aug-2024
• ICS: 53.060 - Industrial trucks
• Technical Committee: CEN/TC 150 - Industrial trucks - Safety
• Drafting Committee: CEN/TC 150/WG 2 - Variable reach trucks
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 02-Feb-2024
• Due Date: 05-Feb-2024
• Completion Date: 02-Feb-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: oSIST prEN 1459-1:2023 - Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks

Relations

• Revises: EN 1459-1:2017+A1:2020 - Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1459-1:2023
01-junij-2023
Nadomešča:
SIST EN 1459-1:2018+A1:2020
Vozila za talni transport - Terenska vozila - Varnostne zahteve in preverjanje - 1.
del: Vozila z mehanizmom za dviganje s spremenljivim dosegom
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach
trucks
Geländegängige Stapler - Sicherheitstechnische Anforderungen und Verifizierung - Teil
1: Stapler mit veränderlicher Reichweite
Chariots tout-terrain - Prescriptions de sécurité et vérification - Partie 1 : Chariots à
portée variable
Ta slovenski standard je istoveten z: prEN 1459-1
ICS:
53.060 Industrijski tovornjaki Industrial trucks
oSIST prEN 1459-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1459-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN 1459-1:2023


DRAFT
EUROPEAN STANDARD
prEN 1459-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2023
ICS 53.060 Will supersede EN 1459-1:2017+A1:2020
English Version

Rough-terrain trucks - Safety requirements and
verification - Part 1: Variable-reach trucks
Chariots tout-terrain - Prescriptions de sécurité et Geländegängige Stapler - Sicherheitstechnische
vérification - Partie 1 : Chariots à portée variable Anforderungen und Verifizierung - Teil 1: Stapler mit
veränderlicher Reichweite
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 150.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1459-1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1459-1:2023
prEN 1459-1:2023 (E)
Contents Page

European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 11
4 Safety requirements and/or protective measures . 16
4.1 General. 16
4.1.1 Introduction . 16
4.1.2 Sharp edges and acute angles . 16
4.1.3 Stored energy components . 16
4.2 Starting/stopping of engine and moving machine .
...