EN ISO 4210-6:2015
(Main)Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods (ISO 4210-6:2015)
Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods (ISO 4210-6:2015)
ISO 4210-6:2015 specifies the frame and fork test methods for ISO 4210‑2.
Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 6: Prüfverfahren für Rahmen und Gabel (ISO 4210-6:2015)
Cycles - Exigences de sécurité des bicyclettes - Partie 6: Méthodes d'essai du cadre et de la fourche (ISO 4210-6:2015)
L'ISO 4210-6:2015 spécifie les méthodes d'essai du cadre et de la fourche pour l'ISO 4210‑2.
Kolesa - Varnostne zahteve za kolesa - 6. del: Preskusne metode za okvirje in vilice koles (ISO 4210-6:2015)
Ta del standarda ISO 4210 določa preskusne metode za okvirje in vilice koles za standard ISO 4210-2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4210-6:2015
01-december-2015
1DGRPHãþD
SIST EN ISO 4210-6:2014
Kolesa - Varnostne zahteve za kolesa - 6. del: Preskusne metode za okvirje in
vilice koles (ISO 4210-6:2015)
Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods (ISO
4210-6:2015)
Fahrräder - Sicherheitstechnische Anforderungen an Fahrräder - Teil 6: Prüfverfahren für
Rahmen und Gabel (ISO 4210-6:2015)
Cycles - Exigences de sécurité des bicyclettes - Partie 6: Méthodes d'essai du cadre et
de la fourche (ISO 4210-6:2015)
Ta slovenski standard je istoveten z: EN ISO 4210-6:2015
ICS:
43.150 Kolesa Cycles
SIST EN ISO 4210-6:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4210-6:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 4210-6:2015
EN ISO 4210-6
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2015
EUROPÄISCHE NORM
ICS 43.150 Supersedes EN ISO 4210-6:2014
English Version
Cycles - Safety requirements for bicycles - Part 6: Frame
and fork test methods (ISO 4210-6:2015)
Cycles - Exigences de sécurité des bicyclettes - Partie 6: Fahrräder - Sicherheitstechnische Anforderungen an
Méthodes d'essai du cadre et de la fourche (ISO 4210- Fahrräder - Teil 6: Prüfverfahren für Rahmen und
6:2015) Gabel (ISO 4210-6:2015)
This European Standard was approved by CEN on 8 August 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4210-6:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4210-6:2015
EN ISO 4210-6:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4210-6:2015
EN ISO 4210-6:2015 (E)
European foreword
This document (EN ISO 4210-6:2015) has been prepared by Technical Committee ISO/TC 149 “Cycles”
in collaboration with Technical Committee CEN/TC 333 “Cycles” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 4210-6:2014.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4210-6:2015 has been approved by CEN as EN ISO 4210-6:2015 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4210-6:2015
---------------------- Page: 6 ----------------------
SIST EN ISO 4210-6:2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.