EN 2311:2017
(Main)Aerospace series - Bushes with self-lubricating liner - Technical specification
Aerospace series - Bushes with self-lubricating liner - Technical specification
This document specifies the required characteristics, inspections and tests, quality assurance and qualification, acceptance and delivery conditions for bushes, designed to be subjected under load, to slow sliding movements, rotations and small oscillations only for aerospace applications.
This standard applies to all bushes when referred to in the respective product standards or in a design documentation.
The liner is designed to be used in the temperature range of −50 °C to 163 °C. Aluminium bushes are limited to −55 °C to 121 °C.
Luft- und Raumfahrt - Buchsen mit selbstschmierender Beschichtung - Technische Lieferbedingungen
Diese Europäische Norm legt die geforderten Eigenschaften, Überprüfungen und Prüfungen, Qualitätssicherung und Qualifikation, Abnahme und Lieferbedingungen für Buchsen, ausgelegt für die Verzögerung von Gleitbewegungen, Drehungen und kleinen Schwingungen unter Last, zur Verwendung ausschließlich in der Luft und Raumfahrt fest.
Diese Europäische Norm gilt für alle Buchsen bei Bezugnahme in den jeweiligen Produktnormen oder einer Konstruktionsdokumentation.
Die Beschichtung ist für die Verwendung in einem Temperaturbereich von −50 °C bis 163 °C ausgelegt. Aluminiumbuchsen sind auf −55 °C bis 121 °C beschränkt.
Série aérospatiale - Bagues avec garniture autolubrifiante - Spécification technique
Aeronavtika - Puše s samomazalno oblogo - Tehnična specifikacija
Ta dokument določa zahtevane lastnosti, preglede in preskuse, zagotavljanje kakovosti in kvalifikacije, pogoje sprejema in dobave za puše, načrtovane za prenašanje obremenitev, za počasno drseče premikanje, vrtenje in majhna nihanja le za uporabo v aeronavtiki.
Ta standard se uporablja za vse puše iz posameznih standardov za izdelke ali iz projektne
dokumentacije.
Obloga je načrtovana za uporabo v temperaturnem razponu od −50 °C do 163 °C. Puše iz aluminija so omejene na razpon od −55 °C do 121 °C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2311:2017
01-junij-2017
1DGRPHãþD
SIST EN 2311:2012
$HURQDYWLND3XãHVVDPRPD]DOQRREORJR7HKQLþQDVSHFLILNDFLMD
Aerospace series - Bushes with self-lubricating liner - Technical specification
Luft- und Raumfahrt - Buchsen mit selbstschmierender Beschichtung - Technische
Lieferbedingungen
Série aérospatiale - Bagues avec garniture autolubrifiante - Spécification technique
Ta slovenski standard je istoveten z: EN 2311:2017
ICS:
49.030.99 Drugi vezni elementi Other fasteners
SIST EN 2311:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2311:2017
---------------------- Page: 2 ----------------------
SIST EN 2311:2017
EN 2311
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2017
EUROPÄISCHE NORM
ICS 49.035 Supersedes EN 2311:2012
English Version
Aerospace series - Bushes with self-lubricating liner -
Technical specification
Série aérospatiale - Bagues avec garniture Luft- und Raumfahrt - Buchsen mit selbstschmierender
autolubrifiante - Spécification technique Beschichtung - Technische Lieferbedingungen
This European Standard was approved by CEN on 2 January 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2311:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2311:2017
EN 2311:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions. 5
4 Required characteristics, inspection and test methods . 7
5 Quality assurance . 11
6 Acceptance conditions . 12
7 Packaging . 12
8 Certificate of compliance . 13
(normative) Testing of permissible and ultimate static loads . 15
A.1 Permissible radial static loads (C ) . 15
s
A.2 Ultimate radial static loads . 15
A.3 Permissible axial static loads (C ) . 16
a
A.4 Ultimate axial static loads .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.