This European standard specifies the characteristics of inch based spherical plain bearing, metal to metal, in corrosion resisting steel, narrow series.
They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms.
They shall be used in the temperature range as determined by the grease capability as below:
- code A: grease as per MIL PRF 23827 Type I, operating temperature range −73 °C to 121 °C;
- code B: grease as per MIL PRF 81322, operating te...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting nickel base alloy (NI-P101HT)
Cold worked and solution treated
Bars for machining for fasteners
3 mm ≤ D ≤ 50 mm
for aerospace applications.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy X4NiCrMoTi43-13
As forged
Forging stock
a or D ≤ 200 mm
for aerospace applications.
ASD-STAN designation: FE-PA2501.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for the determination of conductivity and pH of aqueous extracts of textile materials.
This method has been written in response to an aerospace requirement for a method of extraction using hot water as the EN 1413 requires only a cold water extraction method.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document defines the test methods to evaluate the performance of coaxial, quadrax and databus cables after the installation of plastic cable ties.
It shall be used together with EN 3475-100.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy FE-PM1708
Vacuum arc remelted
Hardened and tempered
Bars
a or D ≤ 200 mm
1 000 MPa ≤ Rm ≤ 1 140 MPa
for aerospace applications.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy FE-PM1708
Vacuum arc remelted
As forged
Forging stock
De ≤ 300 mm
for aerospace applications.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated
Forgings
De ≤ 100 mm
for aerospace applications.
ASD-STAN Designation: FE-PA4901.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

1.1   General
Part 001 of EN 4533 examines the termination of optical fibre cables used in aerospace applications. Termination is the act of installing an optical terminus onto the end of a buffered fibre or fibre optic cable. It encompasses several sequential procedures or practices. Although termini will have specific termination procedures, many share common elements and these are discussed in this document. Termination is required to form an optical link between any two network or system comp...
view more

    • sale 10% off
    • Standard
      113 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated and precipitation treated
Forgings
De ≤ 100 mm
for aerospace applications.
ASD-STAN designation: FE-PA4901.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated
Sheets and strips
a ≤ 3 mm
for aerospace applications.
ASD-STAN designation: FE-PA4901.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document describes the measurement method for the lifetime behaviour of aircraft cabin light units in a standardized aircraft-related environment.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated and precipitation treated
Bars and sections
De ≤ 100 mm
for aerospace applications.
ASD-STAN Designation: FE-PA4901.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCoMoW21-20
Solution treated
Bars and sections
De ≤ 100 mm
for aerospace applications.
ASD-STAN Designation: FE-PA4901.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy X12CrNiCOMoW21-20
Solution treated and descaled
Sheets and plates
3 mm < a ≤ 50 mm
for aerospace applications.
ASD-STAN designation: FE-PA4901.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This European standard describes a test procedure to identify performance characteristics and a weight rating of convection and steam ovens used on aircraft. Furthermore it describes the calculation procedure to determine an energy consumption index and a performance index. There is no direct correlation between the Eco efficiency and cooking performance in terms of food quality and appearance. The two index values represent the Eco efficiency.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document defines the test procedures and calculations to determine the ECO efficiency of the following catering equipment installed in an aircraft:
- Chilling equipment (with freeze function);
- Ovens (steam and convection ovens);
- Beverage makers (coffee maker, water heater).
Based on the results it will be possible to derive the energy consumption index and a performance index of the considered equipment type. The two index values represent the ECO efficiency.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European standard describes a test procedure to identify performance characteristics and a weight rating of beverage maker products used on aircraft. Furthermore it describes the calculation procedure to determine an energy consumption index and a performance index. The effect of the beverage makers on beverage quality is not addressed in this standard.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European standard describes a test procedure to identify performance characteristics and a weight rating of a galley chilling equipment used on aircraft. Furthermore it describes the calculation procedure to determine an energy consumption index and a performance index. Only galley chilling equipment with a freeze function will be considered. The effect of the chilling equipment on food quality is not addressed in this standard.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document specifies the acid pickling of aluminium and aluminium alloys free from hexavalent chromium.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy FE-PA2601
Softened and cold worked
Bar for forged fasteners
D ≤ 50 mm
1 100 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting alloy NI-PH2601
Solution treated and cold worked
Bar for forged fasteners
D ≤ 50 mm
1 550 MPa ≤ Rm ≤ 1 830 MPa
for aerospace applications.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics, tests and tooling applicable to male contacts 018, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-019.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting nickel base alloy (NI-P100HT)
Cold worked and softened
Bar and wire for continuous forging or extrusion for fasteners
3 mm ≤ D ≤ 30 mm

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 017, type A, crimp, class P, used in elements of connection (relay bases) according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in the standards of relays associated to the relay bases listed in EN 3155-002.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel FE-PM1503 (X3CrNiMoAl 13-8-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Bar for machining
a or D ≤ 150 mm
Rm ≥ 1 400 MPa
for aerospace applications.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document describes the electrical contact resistance testing method applicable to conductive and non-conductive coatings applied on test specimens made of conductive materials (unless otherwise specified) for aerospace applications. An objective of this practice is to define and control many of the known variables in such a way that valid comparisons of the contact properties of materials can be made.
This test may be locally destructive depending on the process tested.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This standard specifies several chemical methods of passivation for corrosion resisting steels (austenitic, ferritic, martensitic and precipitation hardenable) and of decontamination for nickel or cobalt base alloys.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The tests as applied in this standard do not permit the full qualification and shall be completed with associated components.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics, tests and tooling applicable to female contacts 019, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-018.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics, tests and tooling applicable to male contacts size 22, 20, 16, 12, 8 and 5, type A, crimp, class R, used in elements of connection according to EN 3155-002.
It should be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-077.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This standard specifies the required characteristics and tests applicable to electrical contacts, male 044, type A, double crimping, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contact is defined in EN 3155-045.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contact is defined in EN 3155-044.
Double crimping contact has a barrel which is design to crimp conductor and jacket of cable in two locations, one on the conductor and the other on the jacket. This way protect the conducto...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics, tests and tooling applicable to female contacts size 22, 20, 16, 12, 8 and 5, type A, crimp, class R, used in elements of connection according to EN 3155-002.
It should be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-076.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics of a coaxial cable, 50 , type WN, for use in aircraft electrical systems at operating temperature between  55 °C and 200 °C and especially for high frequency up to 6 GHz.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel X3CrNiMoAl13-8-2 (1.4534)
Solution annealed and precipitation hardened
1 400 ≤ Rm ≤ 1 550 MPa
Forgings
De ≤ 100 mm
for aerospace applications.
ASD-STAN designation: FE-PM67.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements relating to:
Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1)
Consumable electrode remelted
Cold drawn wire for the manufacture
of the thread inserts
D  3 mm
for aerospace applications.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the characteristics of dummy receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 3.
For plugs associated with these dummy receptacles, see EN 2997-008.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Bars
De ≤ 150 mm
for aerospace applications.
ASD-STAN designation: FE-PM66.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the required characteristics for heat-shrinkable elastomeric semi-rigid, boots for use in aircraft electrical systems at operating temperatures between -75 °C and 150 °C.
The moulded shapes may be supplied with a pre-coated adhesive. Refer to the manufacturers/suppliers for options. A guide to adhesive compatibility is given in Annex A (informative).
These moulded shapes are normally supplied in the styles and dimensions given in EN 4840-002 Table 1 to Table 22. The col...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel 31Ni10
1 230 MPa ≤ Rm ≤ 1 420 MPa
Forgings
De ≤ 40 mm
for aerospace applications.
ASD-STAN designation: FE-PL73.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Forgings
De ≤ 150 mm
for aerospace applications.
ASD-STAN designation: FE-PM66.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel X5CrNiCuNb16-4 (1.4549 type 1.4542)
As cast
Reference heat treatment:
homogenised, solution treated, precipitation hardened and sub zero
Remelting stock
for aerospace applications.
ASD-STAN designation: FE-CM61.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel X8CrNiTi18-10 (1.4878/1.4544)
Softened
500 ≤ Rm ≤ 750 MPa
Tubes for structures
0,5 ≤ a ≤ 5 mm
for aerospace applications.
ASD-STAN designation: FE-PA13.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel 30CrNiMo8 (1.6580)
1 100 MPa ≤ Rm ≤ 1 300 MPa
Forgings
De ≤ 100 mm
for aerospace applications.
W.nr: 1.6580
ASD-STAN designation: FE-PL74.

    • sale 10% off
    • Standard
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies the characteristics, test methods, qualification and acceptance conditions of single and multicore electric cables for general purpose with conductors in aluminium or copper-clad aluminium, intended for installation in aircraft electrical systems.
The insulation of these cables is designed to withstand aircraft voltages at a frequency not exceeding 2 000 Hz. Unless specified by individual product standards the maximum demonstrated voltage of rating of these cables is ac ...
view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for penetrant testing of metallic materials for aerospace applications. It is limited to the direction of surface-breaking defects, e.g. cracks, laps, seams and inclusions.
It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Steel X8CrNiTi18-10 (1.4878/1.4544)
Softened
500 MPa ≤ Rm ≤ 700 MPa
Forgings
De ≤ 100 mm
for aerospace applications.
ASD-STAN designation: FE-PA13.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements relating to:
Heat resisting nickel base alloy Ni-P96-HT
Cold drawn and precipitation treated
Wire
D ≤ 10 mm
for aerospace applications.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for the radiographic testing of castings for aerospace applications.
It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or testing schedule.

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day