EN 60519-7:2008

Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns

Deals with safety of electroheat installations with electron guns and applies to all electroheat applications with electron guns. May also be used for non-thermal applications with electron guns and equipment employing glow discharge systems. Applies also to high-voltage sources feeding electron guns. The main changes with respect to the previous edition cover: - new editions of IEC publications taken into account; - addition of new clauses; - requirements for the earthing system updated; - arrangement of return conductor changed.

Sicherheit in Elektrowärmeanlagen - Teil 7: Besondere Anforderungen an Anlagen mit Elektronenkanonen

Sécurité dans les installations électrothermiques - Partie 7: Exigences particulières pour les installations comportant des canons à électrons

Traite de la sécurité des installations électrothermiques comportant des canons à électrons et s'applique à toutes les applications de l'électrothermie comportant des canons à électrons. Peut être utilisé pour des applications non thermiques comportant des canons à électrons et des équipements employant des systèmes à décharge luminescente. S'applique aussi aux sources à haute tension alimentant les canons à électrons. Les modifications principales par rapport à l'édition précédente comprennent: prise en compte des dernières éditions des publications CEI; addition de nouveaux articles; mise à jour des exigences du système de mise à la terre; modification de la disposition du conducteur de retour.

Varnost pri električnih grelnih inštalacijah - 7. del: Posebne zahteve za inštalacije z elektronskimi topovi (IEC 60519-7:2008)

General Information

• Status: Published
• Publication Date: 04-Dec-2008
• Withdrawal Date: 31-Oct-2011
• ICS: 25.180.10 - Electric furnaces
• Technical Committee: CLC/SR 27 - Industrial electroheating equipment
• Drafting Committee: IEC/TC 27 - IEC_TC_27
• Parallel Committee: IEC/TC 27 - IEC_TC_27
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 05-Dec-2008
• Completion Date: 05-Dec-2008
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: SIST EN 60519-7:2009 - Safety in electroheat installations -- Part 7: Particular requirements for installations with electron guns

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60519-7:2009
01-september-2009
9DUQRVWSULHOHNWULþQLKJUHOQLKLQãWDODFLMDKGHO3RVHEQH]DKWHYH]DLQãWDODFLMH]
HOHNWURQVNLPLWRSRYL,(&
Safety in electroheat installations -- Part 7: Particular requirements for installations with
electron guns
Sécurité dans les installations électrothermiques - Partie 7: Exigences particulières pour
les installations comportant des canons à électrons
Ta slovenski standard je istoveten z: EN 60519-7:2008
ICS:
25.180.10 (OHNWULþQHSHþL Electric furnaces
SIST EN 60519-7:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60519-7:2009

---------------------- Page: 2 ----------------------

SIST EN 60519-7:2009

EUROPEAN STANDARD
EN 60519-7

NORME EUROPÉENNE
December 2008
EUROPÄISCHE NORM

ICS 25.180.10


English version


Safety in electroheat installations -
Part 7: Particular requirements for installations with electron guns
(IEC 60519-7:2008)


Sécurité dans les installations Sicherheit in Elektrowärmeanlagen -
électrothermiques - Teil 7: Besondere Anforderungen
Partie 7: Exigences particulières an Anlagen mit Elektronenkanonen
pour les installations comportant (IEC 60519-7:2008)
des canons à électrons
(CEI 60519-7:2008)




This European Standard was approved by CENELEC on 2008-10-21. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60519-7:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60519-7:2009
EN 60519-7:2008 - 2 -
Foreword
The text of document 27/578/CDV, future edition 2 of IEC 60519-7, prepared by IEC TC 27, Industrial
electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60519-7 on 2008-10-21.
This standard is to be used in conjunction with EN 60519-1:2003. It is intended to specify particular
requirements for electroheating installations with electron guns.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60519-7:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60519-7:2009
- 3 - EN 60519-7:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60050-841 2004 International electrotechnical vocabulary - - -
Part 841: Industrial electroheat


IEC 60204-1 (mod) 2005 Safety of machinery - Electrical equipment of EN 60204-1 2006
machines -
Part 1: General requirements


1)
IEC 60364-4-43 - Low voltage electrical installations - - -
Part 4-43: Protection for safety - Protection
against overcurrent


IEC 60519-1 2003 Saf
...