EN 62841-4-1:2020/prA1:2022
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain saws
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain saws
2022-11-29: Common mods to this A1 are included in EN 62841-4-1:2020/prAB (PR=77082)
D164/C043: DOW = DOR + 48 months
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 4-1: Exigences particulières pour les scies à chaîne
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-1. del: Posebne zahteve za verižne žage - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62841-4-1:2020/oprA1:2023
01-februar-2023
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 4-
1. del: Posebne zahteve za verižne žage - Dopolnilo A1
Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn
and garden machinery - Safety - Part 4-1: Particular requirements for chain saws
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 4-1: Exigences particulières pour les scies à chaîne
Ta slovenski standard je istoveten z: EN 62841-4-1:2020/prA1:2022
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 Električna orodja Electric tools
65.060.80 Gozdarska oprema Forestry equipment
SIST EN 62841-4-1:2020/oprA1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62841-4-1:2020/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN 62841-4-1:2020/oprA1:2023
116/641/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62841-4-1/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-23 2023-03-17
SUPERSEDES DOCUMENTS:
116/640/RR
IEC TC 116 : SAFETY OF MOTOR-OPERATED ELECTRIC TOOLS
SECRETARIAT: SECRETARY:
United States of America Mr Joseph Harding
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and
garden machinery - Safety - Part 4-1: Particular requirements for chain saws
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 62841-4-1:2020/oprA1:2023
IEC CDV 62841-4-1:2017/AMD1© IEC 2022 – 2 – 116/641/CDV
1 FOREWORD
2 This amendment has been prepared by IEC technical committee 116: Safety of motor-
3 operated electric tools.
4 The text of this amendment is based on the following documents:
FDIS Report on voting
116/XXX/FDIS 116/XXX/RVD
5
6 Full information on the voting for the approval of this amendment can be found in the report
7 on voting indicated in the above table.
8 The committee has decided that the contents of this amendment and the base publication will
9 remain unchanged until the stability date indicated on the IEC website under
10 "http://webstore.iec.ch" in the data related to the specific publication. At this date, the
11 publication will be
12 • reconfirmed,
13 • withdrawn,
14 • replaced by a revised edition, or
15 • amended.
16 NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
17 organizations may need a transitional period following publication of a new, amended or revised IEC publication in
18 which to make products in accordance with the new requirements and to equip themselves for conducting new or
19 revised tests.
20 It is the recommendation of the committee that the content of this publication be adopted for implementation
21 nationally not earlier than 36 months from the date of publication.
22 _____________
23 Add the following new Introduction:
24 INTRODUCTION
25 The International Electrotechnical Commission (IEC) draws attention to the fact that it is
26 claimed that compliance with this document may involve the use of patents concerning
27 prevention of inadvertent starting given in Subclause 21.18.102.
28 IEC takes no position concerning the evidence, validity and scope of this patent right.
29 The holders of these patent rights have assured the IEC that they are willing to negotiate
30 licences under reasonable and non-discriminatory terms and conditions with applica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.