IEC 62841-4-1:2017 applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to chain saws for tree service as defined in ISO 11681-2; or pole-mounted pruners. Pole-mounted pruners will be covered by a future part of IEC 62841. The chain saws covered by this...view more

    • sale 10% off
    • Standard
      68 pages
      English language
    • e-Library read for
      1 day

Next steps: the formal vote of the European Amendment
2019-08-08 JF: The Annex ZZ was delivered after the Enquiry started. The need to adapt the Annex ZZ.

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

2020-12-01: common mod - no xml
2018-11-02: this prA covers common mods to EN 62841-3-4:2016/prA1:2018 (pr=67898)

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power.

    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated hammers supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.

    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented b...view more

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day

IEC 62841-4-2:2017 applies to hand-held hedge trimmers which are designed for use by one operator for trimming hedges and bushes, including extended-reach hedge trimmers with a maximum length of 3,5 m. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented...view more

    • sale 10% off
    • Standard
      94 pages
      English language
    • e-Library read for
      1 day

IEC 62841-3-12:2017 applies to transportable threading machines. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, wh...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-21:2017 applies to hand-held drain cleaners (drain cleaners are also known as pipe cleaners) the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misus...view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented b...view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is replaced by the following: This European Standard specifies safety requirements and their verification for the design and construction of robotic battery powered electrical rotary lawnmowers and their peripherals with the rated voltage of the battery being not more than 75 V d.c. charged by mains electrical and/or alternative energies, e.g. solar power. This European Standard does not apply to non-robotic machines such as lawn trimmers, lawn edge trimmers, lawn edgers, r...view more

    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day

IEC 62841-3-14:2017 applies to transportable drain cleaners. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which ...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-17:2017 applies to routers intended for cutting slots into or shaping the edge of various materials. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeab...view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This standard applies to transportable bench grinders that can be equipped with one or two accessories as follows: - type 1 grinding wheels in accordance with ISO 603-4 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - polishing wheels with a diameter not exceeding 310 mm; and with a peripheral speed of any accessory between 10 m/s and 50 m/s. NOTE Polishing wheels are also known as...view more

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This standard applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 360 mm, which hereinafter might simply be referred to as saw or tool. This standard applies to mitre saws having a mass of: - maximum 25 kg for tools capable of being lifted by hand by one person; - maximum 50 kg for tools capable of being lifted by hand by two persons.

    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day

2017-03-16 SW: DOW=DOR+24 m.

    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day

2017-03-16 SW: DOW=DOR+24 m.

    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      3 pages
      English language
    • e-Library read for
      1 day

IEC 62841-3-13:2017 applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the norm...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-10:2017 applies to mixers the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a...view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to transportable motor-operated electric tools and deals with the measurement procedure for planers and thicknessers for measurements of dust emission.

    • sale 10% off
    • Standard
      6 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-8:2016 applies to hand-held shears and nibblers the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, whi...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is applicable, except as follows: Addition: This part of EN 50632 applies to transportable mitre saws intended to cut wood and wood-based materials.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for circular saws for measurements of dust emission.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for planers for measurements of dust emission.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

1.1 General This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. 1.2 Types of dust Dust is a disperse distribution of solid substances in gases, particularly air, resulting from mechanical processes. According to EN 481, two size categories are to be ...view more

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

1.1 General This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. 1.2 Types of dust Dust is a disperse distribution of solid substances in gases, particularly air, resulting from mechanical processes. According to EN 481, two size categories are to be ...view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for jointers for measurements of dust emission.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for routers and trimmers for measurements of dust emission.

    • sale 10% off
    • Standard
      6 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for jig and sabre saws for measurements of dust emission.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is applicable, except as follows: Addition: This part of EN 50632 applies to transportable table saws intended to cut wood or wood-based materials.

    • sale 10% off
    • Standard
      5 pages
      English language
    • e-Library read for
      1 day

IEC 62841-3-4:2016 applies to transportable bench grinders that can be equipped with one or two accessories as follows: - type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm; - polishing wheels with a diameter not exceeding 310 mm and with a peripheral speed of any accessory between 10 m/s and 50 m/s. The attention of National Comm...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-11:2015 applies to applies to reciprocating saws such as jig saws and sabre saws.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. H...view more

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

IEC 62841-3-9:2014 applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 360 mm, which hereinafter might simply be referred to as saw or tool. This standard does not apply to mitre saws intended to cut other metals, such as magnesium, steel and iron. This standard does not apply to mitre saws with an automatic feeding device. This standard d...view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

IEC 62841-3-10:2015(E) applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive bonded reinforced wheel of Type 41, or diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and a wheel diameter range of 250 mm to 410 mm. This standard does not apply to: - transportable mitre...view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders, including angle, straight and vertical. This standard applies to tools with a rated capacity not exceeding 230 mm.

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

IEC 62841-2-14:2015(E) applies to hand-held planners the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mo...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is applicable except as follows: Addition: This part of EN 50632 applies to hammers.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

IEC 62841-1:2014 deals with the safety of electric motor-operated or magnetically driven: - hand-held tools (IEC 62841-2); - transportable tools (IEC 62841-3); - lawn and garden machinery (IEC 62841-4). The above listed categories are hereinafter referred to as 'tools' or 'machines'. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for bat...view more

    • sale 10% off
    • Standard
      186 pages
      English language
    • e-Library read for
      1 day

1.1 General This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. 1.2 Types of dust Dust is a disperse distribution of solid substances in gases, particularly air, resulting from mechanical processes. According to EN 481, two size categories are to be ...view more

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This clause of Part 1 is applicable except as follows: Addition: This part of EN 50632 applies to diamond core drills.

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day