EN 60519-1:2003

Safety in electroheat installations - Part 1: General requirements

Lays down general safety requirements applicable to industrial electroheat installations, which may comprise electroheat equipment in the voltage range up to 3 600 V a.c. or 5 000 V d.c..

Sicherheit in Elektrowärmeanlagen - Teil 1: Allgemeine Anforderungen

Sécurité dans les installations électrothermiques - Partie 1: Exigences générales

Cette norme existe en langue anglaise uniquement.

Varnost pri električnih grelnih inštalacijah - 1. del: Splošne zahteve (IEC 60519-1:2003)

General Information

• Status: Withdrawn
• Publication Date: 05-Nov-2003
• Withdrawal Date: 30-Sep-2006
• ICS: 25.180.10 - Electric furnaces
• Technical Committee: CLC/SR 27 - Industrial electroheating equipment
• Drafting Committee: IEC/TC 27 - IEC_TC_27
• Parallel Committee: IEC/TC 27 - IEC_TC_27
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 03-Jan-2014
• Completion Date: 03-Jan-2014
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60519-1:2004 - Safety in electroheat installations -- Part 1: General requirements

Relations

• Replaces: EN 60519-1:1993 - Safety in electroheat installations - Part 1: General requirements
• Effective Date: 29-Jan-2023
• Replaced By: EN 60519-1:2011 - Safety in electroheating installations - Part 1: General requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60519-1:2004
01-februar-2004
1DGRPHãþD
SIST EN 60519-1:1999
9DUQRVWSULHOHNWULþQLKJUHOQLKLQãWDODFLMDKGHO6SORãQH]DKWHYH,(&

Safety in electroheat installations -- Part 1: General requirements
Sicherheit in Elektrowärmeanlagen -- Teil 1: Allgemeine Anforderungen
Sécurité dans les installations électrothermiques -- Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN 60519-1:2003
ICS:
25.180.10 (OHNWULþQHSHþL Electric furnaces
SIST EN 60519-1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60519-1:2004

---------------------- Page: 2 ----------------------

SIST EN 60519-1:2004
EUROPEAN STANDARD EN 60519-1
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003

ICS 25.180.10 Supersedes EN 60519-1:1993


English version


Safety in electroheat installations
Part 1: General requirements
(IEC 60519-1:2003)


Sécurité dans les installations Sicherheit in Elektrowärmeanlagen
électrothermiques Teil 1: Allgemeine Anforderungen
Partie 1: Exigences générales (IEC 60519-1:2003)
(CEI 60519-1:2003)



This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60519-1:2003 E

---------------------- Page: 3 ----------------------

SIST EN 60519-1:2004
EN 60519-1:2003 - 2 -
Foreword
The text of document 27/358/FDIS, future edition 3 of IEC 60519-1, prepared by IEC TC 27, Industrial
electroheating equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60519-1 on 2003-10-01.
This European Standard supersedes EN 60519-1:1993.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
Significant technical changes with respect to EN 60519-1:1993 are as follows:
- the scope is now extended to cover also voltage band 3 equipment with rated voltage not exceeding
3 600 V a.c. or 5 000 V d.c.; the relevant provisions for such equipment have been added in clauses
on, for example protection against electric shock, equipotential bonding or maintenance work;
- requirements concerning equipotential bonding have been essentially modified and introduced in a
separate clause, based on the actual relevant provisions of EN 60204-1;
- general provisions on the impact of electromagnetic effects have been given;
- information concerning technical documentation has been modified;
- a bibliography has been added.
General test methods for industrial electroheating installations are specified in EN 60398:1999.
Additional information on non-electrical hazards possibly arising from the utilization of industrial electroheat
equipment may be taken from EN 746-1 (see Bibliography), which specifies common safety requirements
for industrial thermoprocessing equipment, as well as of an electrical and of a non-electrical kind.
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
_________
Endorsement notice
The text of the International Standard IEC 60519-1:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60398 NOTE Harmonized as EN 60398:1999 (not modified).
IEC 61000-3-2 NOTE
...