EN 50294:1998

Measurement method of total input power of ballast-lamp circuits

This Standard gives the measurement method of the total input power for ballast-lamp circuits when operating with their associated fluorescent lamp(s). This standard applies to electrical ballast-lamp circuits comprised solely of the ballast and of the lamp(s). NOTE: Requirements for testing individual ballasts during production are not included. It specifies the measurement method for the total input power for all ballasts sold for domestic and normal commercial purposes operating with the following fluorescent lamps: linear lamps with power equal to or greater than 15 W; single ended (compact) lamps with power equal to or greater than 18 W; other general purpose lamps. This standard does not apply to: ballasts which form an integral part of the lamp; ballast-lamp circuits with capacitors connected in series; controllable wire-wound magnetic ballasts; luminaires, which rely on additional optical performance aspects

Verfahren zur Messung der Gesamteingangsleistung von Vorschaltgerät-Lampe-Schaltungen

Méthode de mesure de la puissance d'entrée totale des circuits ballasts/lampes

Measurement method of total input power of balast-lamp circuits

General Information

• Status: Withdrawn
• Publication Date: 13-Dec-1998
• Withdrawal Date: 31-May-1999
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34D - IEC_SC_34D
• Parallel Committee: IEC/SC 34D - IEC_SC_34D
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-Nov-2014
• Completion Date: 16-Nov-2014
• Directive: 2000/55/EC - Directive 2000/55/EC of the European Parliament and of the Council of 18 September 2000 on energy efficiency requirements for ballasts for fluorescent lighting
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Mandate: M/095 - In vitro diagnostic (prog.)
• Ref Project: SIST EN 50294:2000 - Measurement method of total input power of ballast-lamp circuits

Relations

• Replaced By: EN 62442-1:2011 - Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
• Effective Date: 29-Jan-2023
• Amended By: EN 50294:1998/A2:2003 - Measurement method of total input power of ballast-lamp circuits
• Effective Date: 29-Jan-2023
• Amended By: EN 50294:1998/A1:2001 - Measurement method of total input power of ballast-lamp circuits
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50294:2000
01-april-2000
Measurement method of total input power of balast-lamp circuits
Measurement method of total input power of ballast-lamp circuits
Verfahren zur Messung der Gesamteingangsleistung von Vorschaltgerät-Lampe-
Schaltungen
Méthode de mesure de la puissance d'entrée totale des circuits ballasts/lampes
Ta slovenski standard je istoveten z: EN 50294:1998
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 50294:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50294:2000

---------------------- Page: 2 ----------------------

SIST EN 50294:2000

---------------------- Page: 3 ----------------------

SIST EN 50294:2000
...