SIST EN 3155-005:2008

Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard

This standard specifies the required characteristics and tests applicable to female electrical contacts 004, type A, crimp, class T, used in elements of connection according to EN 3155 002.
It shall be used together with EN 3155 001.
The associated female contacts are defined in EN 3155 004.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 005: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse T - Produktnorm

Diese Norm legt die Anforderungen und Prüfungen für elektrische Buchsenkontakte 004, Typ A, crimpbar, Klasse T, zur Verwendung in elektrischen Verbindungselementen nach EN 3155 002 fest.
Sie ist in Verbindung mit EN 3155 001 anzuwenden.
Die zugehörigen Stiftkontakte sind in EN 3155 004 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 005 : Contacts électriques, femelles, type A, à sertir, classe T - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 005. del: Kontakti, električni, ženski, tip A, nagubani, razred T - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 06-Apr-2008
• Withdrawal Date: 25-Apr-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 26-Apr-2019
• Due Date: 19-May-2019
• Completion Date: 26-Apr-2019
• Ref Project: EN 3155-005:2006 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard

Relations

• Replaced By: SIST EN 3155-005:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
• Effective Date: 10-Apr-2019
• Corrected By: SIST EN 3155-005:2008/AC:2008 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
• Effective Date: 01-Jun-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3155-005:2008
01-junij-2008
$HURQDYWLND(OHNWULþQLNRQWDNWL]DXSRUDERYYH]QLKHOHPHQWLKGHO
.RQWDNWLHOHNWULþQLåHQVNLWLS$QDJXEDQLUD]UHG76WDQGDUG]DSURL]YRG
Aerospace series - Electrical contacts used in elements of connection - Part 005:
Contacts, electrical, female, type A, crimp, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 005: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse T - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
005 : Contacts électriques, femelles, type A, à sertir, classe T - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-005:2006
ICS:
49.060
SIST EN 3155-005:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 3155-005
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 49.060

English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 005: Contacts, electrical, female, type A,
crimp, class T - Product standard
Série aérospatiale - Contacts électriques utilisés dans les Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung
organes de connexion - Partie 005 : Contacts électriques, in Verbindungselementen - Teil 005: Elektrische
femelles, type A, à sertir, classe T - Norme de produit Buchsenkontakte, Typ A, crimpbar, Klasse T - Produktnorm
This European Standard was approved by CEN on 6 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-005:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 3155-005:2006 (E)
Contents Page
Foreword .3
0 Introduction.4
1 Scope .4
2 Normative references .4
3 Definitions .5
4 Required characteristics .5
5 Designation .10
6 Marking .10
7 Technical specification.10

2

---------------------- Page: 3 ----------------------

EN 3155-005:2006 (E)
Foreword
This European Standard (EN 3155-005:2006) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-
ceived the approval of the National Associations and the Official Services of the member countries of AECMA,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at
the latest by October 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-
mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-
bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-
land and the United Kingdom.
3

---------------------- Page: 4 ----------------------

EN 3155-005:2006 (E)
0 Introduction
The contacts defined by this standard are derived from those of MIL-C-39029/5 and, intermateable with those
of MIL-C-39029/4. They are specified as a 260 °C class instead of a 200 °C class as detailed in the MIL stan-
dard.
1 Scope
This standard specifies the required characteristics and tests applicable to female electrical contacts 004,
type A, crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-004.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated refer-
ences, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system
EN 2083; Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (series), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and
utilization of contacts
EN 3155-004, Aerospace series — Electrical contacts used in elements of connection — Part 005: Contacts,
electrical, male, type A, crimp, class T — Product standard
MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits, general
1
specification for
1)
MIL-C-22520/1, Crimping tools, terminal, hand, wire termination for wire barrel sizes 12 through 20
1)
MIL-C-22520/2, Crimping tools, terminal, hand, wire termination for wire barrel sizes 20 through 28
1)
MIL-C-22520/7, Crimping tools, terminal, hand, wire termination for wire barrel sizes 16, 20 and 22
MIL-C-39029/4, Contacts, electrical connector, pin, crimp removable, (for MIL-C-26482 series 2, MIL-C-81703
1)
series 3, MIL-C-83723 series I and III, and MIL-C-83733 connectors)
MIL-C-39029/5, Contacts, electrical connector, socket, crimp removable, (for MIL-C-26482 series 2,
MIL-C-81703 series 3, MIL-C-83723 series I and III, and MIL-C-83733 connectors an
...