Electric cables - Charging cables for electric vehicles

This standard specifies design, dimensions and test requirements for halogen-free cables with extruded insulation and sheath having a voltage rating of up to and including 450/750 V for flexible applications under severe condition for the power supply between the electricity supply point or the charging station and the electric vehicle (EV).
The EV charging cable is intended to supply power and if needed communication (details see EN 61851 1 and the EN 62196 series) to an electric vehicle. The charging cables are applicable for charging modes 1-3 of EN 61851 1. The cables in this standard with rated voltage 300/500 V are only permitted for charging mode 1 of EN 61851 1.
The maximum conductor operating temperatures for the cables in this standard is 90 °C.
The cables may be:
a)   an integral part of the vehicle (case A of EN 61851 1); or
b)   a detachable cable assembly with a vehicle connector and AC supply connection to a socket outlet (case B of EN 61851 1); or
c)   permanently attached to a fixed charging point (case C of EN 61851 1).
This standard describes cables whose safety and reliability is ensured when they are installed and/or used in accordance to the guide to use EN 50565 1 and Annex B

Kabel und Leitungen - Ladeleitungen für Elektrofahrzeuge

Câbles électriques - Câbles de charge pour véhicules électriques

Električni kabli - Kabli za napajanje električnih vozil - Dopolnilo A2

General Information

Status
Not Published
Public Enquiry End Date
30-Sep-2021
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
27-Jul-2021
Due Date
14-Dec-2021
Completion Date
11-Nov-2021

Relations

Buy Standard

Draft
EN 50620:2017/oprA2:2021
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50620:2017/oprA2:2021
01-september-2021
Električni kabli - Kabli za napajanje električnih vozil - Dopolnilo A2
Electric cables - Charging cables for electric vehicles
Kabel und Leitungen - Ladeleitungen für Elektrofahrzeuge
Câbles électriques - Câbles de charge pour véhicules électriques
Ta slovenski standard je istoveten z: EN 50620:2017/prA2
ICS:
29.060.20 Kabli Cables
43.120 Električna cestna vozila Electric road vehicles
SIST EN 50620:2017/oprA2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50620:2017/oprA2:2021

---------------------- Page: 2 ----------------------
SIST EN 50620:2017/oprA2:2021

EUROPEAN STANDARD DRAFT
EN 50620:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
July 2021
ICS 29.060.20
English Version
Electric cables - Charging cables for electric vehicles
Câbles électriques - Câbles de charge pour véhicules Kabel und Leitungen - Ladeleitungen für Elektrofahrzeuge
électriques
This draft amendment prA2, if approved, will modify the European Standard EN 50620:2017; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2021-10-01.

It has been drawn up by CLC/TC 20.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 72459 Ref. No. EN 50620:2017/prA2 E

---------------------- Page: 3 ----------------------
SIST EN 50620:2017/oprA2:2021
EN 50620:2017/prA2:2021 (E)
1 European foreword
2 This document (EN 50620:2017/prA2:2021) has been prepared by CLC/TC 20 “Electric cables”.
3 This document is currently submitted to the Enquiry.
4 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
5 This document has been prepared under a mandate given to CENELEC by the European Commission
6 and the European Free Trade Association, and supports essential requirements of EU Directive(s).
7 For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of
8 EN 50620:2017/A1:2019.
2

---------------------- Page: 4 ----------------------
SIST EN 50620:2017/oprA2:2021
EN 50620:2017/prA2:2021 (E)
9 1 Modifications to Clause 2, “Normative references”
10 Replace “EN 50525-1:2011” with “EN 50525-1”.
11 Replace “EN 60332-1-2:2004/A1:2015” with “EN 60332-1-2”.
12 Add the following standard:
13 “EN 60754-3, Test on gases evolved during combustion of materials from cables - Part 3: Measurement
14 of low level of halogen content by ion chromatography”
15 2 Modifications to Clause 4, “Rated voltage”
nd
16 In the 2 column of Table 1, delet
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.