SIST EN ISO 11114-1:2012/A1:2017
(Amendment)Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Gasflaschen - Kompatibilität von Flaschen- und Ventil-Werkstoffen mit Gasinhalten - Teil 1: Metallische Werkstoffe (ISO 11114-1:2012/Amd 1:2017)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 1: Matériaux métalliques - Amendement 1 (ISO 11114-1:2012/Amd 1:2017)
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del: Kovinski materiali - Dopolnilo A1 (ISO 11114-1:2012/Amd 1:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11114-1:2012/A1:2017
01-maj-2017
Plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 1. del:
Kovinski materiali - Dopolnilo A1 (ISO 11114-1:2012/Amd 1:2017)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1:
Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Gasflaschen - Kompatibilität von Flaschen- und Ventil-Werkstoffen mit Gasinhalten - Teil
1: Metallische Werkstoffe (ISO 11114-1:2012/Amd 1:2017)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les
contenus gazeux - Partie 1: Matériaux métalliques - Amendement 1 (ISO 11114-
1:2012/Amd 1:2017)
Ta slovenski standard je istoveten z: EN ISO 11114-1:2012/A1:2017
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN ISO 11114-1:2012/A1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
EN ISO 11114-1:2012/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Compatibility of cylinder and valve
materials with gas contents - Part 1: Metallic materials -
Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
Bouteilles à gaz - Compatibilité des matériaux des Gasflaschen - Kompatibilität von Flaschen- und Ventil-
bouteilles et des robinets avec les contenus gazeux - Werkstoffen mit Gasinhalten - Teil 1: Metallische
Partie 1: Matériaux métalliques - Amendement 1 (ISO Werkstoffe (ISO 11114-1:2012/Amd 1:2017)
11114-1:2012/Amd 1:2017)
This amendment A1 modifies the European Standard EN ISO 11114-1:2012; it was approved by CEN on 14 November 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11114-1:2012/A1:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
EN ISO 11114-1:2012/A1:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
EN ISO 11114-1:2012/A1:2017 (E)
European foreword
This document (EN ISO 11114-1:2012/A1:2017) has been prepared by Technical Committee
ISO/TC 58 “Gas cylinders” in collaboration with Technical Committee CEN/TC 23 “Transportable gas
cylinders” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 11114-1:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2017, and
conflicting national standards shall be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11114-1:2012/Amd 1:2017 has been approved by CEN as
EN ISO 11114-1:2012/A1:2017 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
INTERNATIONAL ISO
STANDARD 11114-1
Second edition
2012-03-15
AMENDMENT 1
2017-01
Gas cylinders — Compatibility of
cylinder and valve materials with gas
contents —
Part 1:
Metallic materials
AMENDMENT 1
Bouteilles à gaz — Compatibilité des matériaux des bouteilles et des
robinets avec les contenus gazeux —
Partie 1: Matériaux métalliques
AMENDEMENT 1
Reference number
ISO 11114-1:2012/Amd.1:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
ISO 11114-1:2012/Amd.1:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
ISO 11114-1:2012/Amd.1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www . i so .org/ iso/ foreword .html.
Amendment 1 to ISO 11114-1:2012 was prepared by Technical Committee ISO/TC 58, Gas cylinders.
© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
---------------------- Page: 10 ----------------------
SIST EN ISO 11114-1:2012/A1:2017
ISO 11114-1:2012/Amd.1:2017(E)
Gas cylinders — Compatibility of cylinder and valve
materials with gas contents —
Part 1:
Metallic materials
AMENDMENT 1
Page 3, 4.3.2 Particular considerations
Replace the note with the following:
NOTE Reference is made in this document to stainless steels by their commonly used AISI identification
numbers, i.e. 304. For example, the equivalent grades according to EN 10088–1 are as follows:
304 1.4301
304L 1.4306 and 1.4307
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.