SIST EN ISO 19160-2:2024

Addressing - Part 2: Assigning and maintaining addresses for objects in the physical world (ISO 19160-2:2023)

Scope of the proposed deliverable
This document focuses on assigning and maintaining addresses that allow the unambiguous determination of an object in the physical world for purposes of identification and location in the context of public administration and public service delivery. During assignment an address is first associated with a particular object in the physical world. During maintenance the address changes, e.g., it is re-assigned to a different object, one or more of the address components are modified (e.g. a street name change), or the address is retired when it is no longer used. This document
—   establishes an overall set of objectives for assigning and maintaining addresses;
—   specifies the principles for assigning and maintaining addresses;
—   specifies a good practice for assigning and maintaining addresses; and
—   specifies a governance framework for assigning and maintaining addresses;
Very often local governments (e.g. municipalities) are assigned the mandate for the planning, implementation, evaluation, and ongoing maintenance of addresses, and they are often supported by other organizations, such as national government, private sector companies and national or regional organizations. This document is of relevance and applicable to all these organizations who have an interest, role or responsibility in address assignment and maintenance, such as
—   developing legislation, policies or regulations for addressing;
—   facilitating and coordinating the naming of address components (the constituent parts of an address) and announcing and communicating these names;
—   installing address component signs in the physical world;
—   designing and implementing business processes related to address assignment and maintenance;
—   designing, implementing and maintaining access to address data;
—   developing software to facilitate the above; and
—   using addresses.

Adressierung - Teil 2: Zuteilung und Pflege von Objektadressen in der physischen Welt (ISO 19160-2:2023)

Adressage - Partie 2: Attribution et mise à jour des adresses pour les objets du monde physique (ISO 19160-2:2023)

Le présent document porte principalement sur l'attribution et la mise à jour des adresses permettant de caractériser un objet du monde physique de manière univoque à des fins d'identification et de localisation dans le contexte de l'administration publique et la fourniture de services publics. Lors de l'attribution, une adresse est d'abord associée à un objet particulier dans le monde physique. L'adresse change au cours de la maintenance, par exemple, elle est réattribuée à un objet différent, un ou plusieurs des composants d'adresse sont modifiés (par exemple un changement de nom de rue), ou l'adresse est retirée quand elle n'est plus utilisée. Le présent document:
a)       spécifie de bonnes pratiques d'attribution et de mise à jour des adresses et des données d'adresse; et
b)       spécifie un cadre de gouvernance pour l'attribution et la mise à jour des adresses et des données d'adresse.
Il arrive fréquemment que les administrations locales (par exemple les municipalités) se voient confier la mission de planification, de mise en œuvre, d'évaluation et de mise à jour en continu des adresses. Elles sont souvent soutenues par d'autres organismes, telles que les administrations nationales, une agence postale, des entreprises privées et des organismes nationaux et régionaux. Le présent document est applicable à tous les organismes ayant un intérêt, un rôle ou une responsabilité dans l'attribution et la mise à jour des adresses, par exemple en ce qui concerne:
—     élaborer une législation, des politiques ou des réglementations d'adressage;
—     faciliter et coordonner le nommage des composants d'adresse (les éléments constitutifs d'une adresse), et annoncer et communiquer ces noms;
—     installer des plaques de composants d'adresse dans le monde physique;
—     concevoir et mettre en œuvre des opérations liées à l'attribution et à la mise à jour des adresses;
—     concevoir, mettre en œuvre et maintenir l'accès aux données d'adresse;
—     développer des logiciels permettant de faciliter les tâches ci-dessus; et
—     utiliser les adresses.

Naslavljanje - 2. del: Dodeljevanje in vzdrževanje naslovov za objekte v fizičnem svetu (ISO 19160-2:2023)

Ta dokument se osredotoča na dodeljevanje in vzdrževanje naslovov, ki omogočajo nedvoumno določitev objekta v fizičnem svetu za namene identifikacije in določitve položaja v okviru javne uprave oziroma izvajanja javnih storitev. Med dodelitvijo je naslov najprej povezan z določenim objektom v fizičnem svetu. Med vzdrževanjem se naslov spremeni, npr. je znova dodeljen drugemu objektu, spremeni se ena ali več komponent naslova (npr. sprememba imena ulice) ali pa se naslov odstrani, ko se ne uporablja več. Ta dokument:
–   oblikuje splošen nabor ciljev za dodeljevanje in vzdrževanje naslovov;
–   določa načela za dodeljevanje in vzdrževanje naslovov;
–   določa dobro prakso za dodeljevanje in vzdrževanje naslovov; ter
–   določa okvir upravljanja v zvezi z dodeljevanjem in vzdrževanjem naslovov.
Lokalne oblasti (npr. občine) imajo zelo pogosto pooblastila za načrtovanje, izvajanje, vrednotenje in stalno vzdrževanje naslovov, velikokrat pa jih podpirajo druge organizacije, kot so državna oblast, podjetja zasebnega sektorja in nacionalne ali regionalne organizacije. Ta dokument je relevanten in se uporablja za vse organizacije, ki imajo interes, vlogo ali odgovornost na področju dodeljevanja in vzdrževanja naslovov, kot je:
–   razvoj zakonodaje, politik ali predpisov v zvezi z naslavljanjem;
–   omogočanje in usklajevanje poimenovanja komponent (sestavnih delov) naslova ter objavljanje in sporočanje teh imen;
–   namestitev znakov za komponente naslovov v fizičnem svetu;
–   načrtovanje in izvajanje poslovnih procesov, povezanih z dodeljevanjem in vzdrževanjem naslovov;
–   načrtovanje, izvajanje in vzdrževanje dostopa do podatkov o naslovu;
–   razvoj programske opreme, ki bi omogočila zgoraj navedeno; ter
–   uporaba naslovov.

General Information

• Status: Published
• Public Enquiry End Date: 09-Jan-2023
• Publication Date: 11-Dec-2023
• ICS: 03.240 - Postal services
• ICS: 35.240.69 - IT applications in postal services
• ICS: 35.240.70 - IT applications in science
• Technical Committee: GIG - Geographic information
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2023
• Due Date: 05-Feb-2024
• Completion Date: 12-Dec-2023
• Ref Project: EN ISO 19160-2:2023 - Addressing - Part 2: Assigning and maintaining addresses for objects in the physical world (ISO 19160-2:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19160-2:2024
01-januar-2024
Naslavljanje - 2. del: Dodeljevanje in vzdrževanje naslovov za objekte v fizičnem
svetu (ISO 19160-2:2023)
Addressing - Part 2: Assigning and maintaining addresses for objects in the physical
world (ISO 19160-2:2023)
Adressierung - Teil 2: Zuteilung und Pflege von Objektadressen in der physischen Welt
(ISO 19160-2:2023)
Adressage - Partie 2: Attribution et mise à jour des adresses pour les objets du monde
physique (ISO 19160-2:2023)
Ta slovenski standard je istoveten z: EN ISO 19160-2:2023
ICS:
03.240 Poštne storitve Postal services
35.240.69 Uporabniške rešitve IT pri IT applications in postal
poštnih storitvah services
SIST EN ISO 19160-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19160-2:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 19160-2:2024


EN ISO 19160-2
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 03.240; 35.240.70
English Version

Addressing - Part 2: Assigning and maintaining addresses
for objects in the physical world (ISO 19160-2:2023)
Adressage - Partie 2: Attribution et mise à jour des Adressierung - Teil 2: Zuteilung und Pflege von
adresses pour les objets du monde physique (ISO Objektadressen in der physischen Welt (ISO 19160-
19160-2:2023) 2:2023)
This European Standard was approved by CEN on 27 October 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19160-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19160-2:2024
EN ISO 19160-2:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19160-2:2024
EN ISO 19160-2:2023 (E)
European foreword
This document (EN ISO 19160-2:2023) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19160-2:2023 has been approved by CEN as EN ISO 19160-2:2023 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 19160-2:20
...

SLOVENSKI STANDARD
oSIST prEN ISO 19160-2:2023
01-januar-2023
Naslavljanje - 2. del: Dodeljevanje in vzdrževanje naslovov za objekte v fizičnem
svetu (ISO/DIS 19160-2:2022)
Addressing - Part 2: Assigning and maintaining addresses for objects in the physical
world (ISO/DIS 19160-2:2022)
Adressierung - Teil 2: Zuteilung und Pflege von Objektadressen in der physischen Welt
(ISO/DIS 19160-2:2022)
Titre manquant
Ta slovenski standard je istoveten z: prEN ISO 19160-2
ICS:
03.240 Poštne storitve Postal services
35.240.69 Uporabniške rešitve IT pri IT applications in postal
poštnih storitvah services
oSIST prEN ISO 19160-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19160-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19160-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19160-2
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-10-24 2023-01-16
Addressing —
Part 2:
Assigning and maintaining addresses for objects in the
physical world
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19160-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19160-2:2023
ISO/DIS 19160-2:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19160-2
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:

Addressing —
Part 2:
Assigning and maintaining addresses for objects in the
physical world
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19160-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19160-2:2023
ISO/DIS 19160-2:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...