IEC 62321-3-2:2020 is available as IEC 62321-3-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62321-3-2:2020 specifies the screening analysis of fluorine, chlorine and bromine in polymers and electronics using combustion-ion chromatography (C-IC). IEC 62321-3-2:2020 cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This editio...
view more

    • sale 15% off
    • Standard
      90 pages
      English and French language

IEC 62321-10:2020 specifies one normative technique for the determination of polycyclic aromatic hydrocarbons (PAHs) in polymers of electrotechnical products. These PAHs can especially be found in the plastic and rubber parts of a wide range of consumer articles. They are present as impurities in some of the raw materials used in the production of such articles, in particular in extender oils and in carbon black. They are not added intentionally to the articles and do not perform any specific fu...view more

    • sale 15% off
    • Standard
      61 pages
      English and French language

IEC TR 63212:2020 provides a feasibility assessment to determine if harmonization of environmental performance criteria is possible and would benefit the electrotechnical industry.
This document is intended as a feasibility study report rather than a standard. It reports the possibility/opportunity to harmonize environmental performance criteria and, with it, the feasibility for future development of an international standard on environmental performance criteria. The learnings and recommendati...
view more

    • sale 15% off
    • Technical report
      34 pages
      English language

IEC 62430:2019 describes principles, specifies requirements and provides guidance for organizations intending to integrate environmental aspects into the design and development in order to minimize the adverse environmental impacts of their products.
This document applies to processes on how ECD (environmentally conscious design) are integrated into the design and development. This document applies to any organization, regardless of its size, type or sector.
This document does not provide requ...
view more

    • sale 15% off
    • Standard
      62 pages
      English and French language

IEC 62474:2018 is available as IEC 62474:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62474:2018 specifies the procedure, content, and form relating to material declarations for products of companies operating in and supplying the electrotechnical industry. Process chemicals and emissions during product use are not in the scope of this International Standard. It provides data to downs...view more

    • sale 15% off
    • Standard
      77 pages
      English and French language

Specifies the requirements for individual types of sheets of non-impregnated densified laminated wood produced from beech veneer defined in IEC 61061-1.

    • sale 15% off
    • Standard
      5 pages
      English and French language

IEC 62321-7-2:2017 describes procedures to measure hexavalent chromium, Cr(VI), quantitatively in samples of polymers and electronics. This method employs organic solvent to dissolve or swell the sample matrix, followed by an alkaline digestion procedure to extract Cr(VI) from samples. Studies have shown that organic/alkaline solution is more effective than acidic solution in extracting Cr(VI) from soluble and insoluble samples. Minimal reduction of Cr(VI) to Cr(III) or oxidation of Cr(III) to C...view more

    • sale 15% off
    • Standard
      35 pages
      English and French language

IEC 62321-8:2017 specifies two normative and two informative techniques for the determination of di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-isononyl phthalate (DINP) and di-iso-decyl phthalate (DIDP) in polymers of electrotechnical products.
It has the status of a horizontal standard in accordance with IEC Guide 108.

    • sale 15% off
    • Standard
      147 pages
      English and French language

IEC TR 62936:2016(E) provides guidelines for the selection of substances for the development of test method standards. The substances and substance groups listed in the IEC 62474 database are the primary source of candidate substances. Other substances that are under regulatory roadmap and market requirements can also be considered for this filtering and selection process.

    • sale 15% off
    • Technical report
      16 pages
      English language

IEC 63000:2016 specifies the technical documentation that the manufacturer compiles in order to declare compliance with the applicable substance restrictions

    • sale 15% off
    • Standard
      21 pages
      English and French language

IEC 62824:2016(E) which is a Technical Report provides information on selection and efficient use of materials in electrical and electronic products. Environmentally conscious design (ECD) can then proceed in such a way that aspects, including material type, material quantity, material substitutability, renewable material, material recyclability, material recoverability, and durability of product are taken into account during the design phase.

    • sale 15% off
    • Technical report
      12 pages
      English language

IEC 62474-1:2015(E) specifies the procedure, content, and form relating to material declarations for products of companies operating in and supplying the electrotechnical industry. It illustrates the flexibility and functionality of IEC 62474 using examples, supports organizations that create software to exchange substance and material data, supports users that submit and receive material declarations and is designed to support consistent implementation of IEC 62474. Clause 3 summarizes industry...view more

    • sale 15% off
    • Technical report
      72 pages
      English language

IEC 62321-7-1:2015 describes a boiling water extraction procedure intended to provide a qualitative determination of the presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protection coatings on metallic samples. In this procedure, when Cr(VI) in a sample is detected below the 0,10 g/cm2 LOQ (limit of quantification), the sample is considered to be negative for Cr(VI). Since Cr(VI) may not be uniformly distributed in the coating even within the same sample batch, a "gr...view more

    • sale 15% off
    • Standard
      37 pages
      English and French language

IEC 62321-6:2015 specifies one normative and two informative techniques for the determination of polybrominated biphenyls (PBB) and diphenyl ethers (PBDE) in polymers of electrotechnical products. The test methods are:
- The gas chromatography-mass spectrometry (GC-MS);
- The ion attachment mass spectrometry (IAMS) technique and
- The high-pressure liquid chromatography technique. This first edition of IEC 62321-6 is a partial replacement of IEC 62321:2008, forming a structural revision and g...
view more

    • sale 15% off
    • Standard
      116 pages
      English and French language

IEC TR 62726:2014 describes principles and guidance on quantifying greenhouse gas emission (CO2e) reductions compared to a baseline (which includes "business as usual") for electrical and electronic products and systems (hereinafter referred as EE products). It is based on the result of a comparative study on existing methodologies published or under discussion in international organizations.

    • sale 15% off
    • Technical report
      49 pages
      English language

IEC 62542:2013 specifies generic terms and definitions that are related to environmental standardization within the IEC. It serves as a glossary of terminology to be considered for environmental aspects of relevant work in IEC. The terms cover environmental issues that are relevant for electrotechnical products across all product life cycle stages. It has the status of a horizontal standard in accordance with IEC Guide 108.

    • sale 15% off
    • Standard
      37 pages
      English and French language

IEC 62321-2:2013 provides strategies of sampling along with the mechanical preparation of samples from electrotechnical products, electronic assemblies and electronic components. These samples can be used for analytical testing to determine the levels of certain substances as described in the test methods in other parts of IEC 62321. Restrictions for substances will vary between geographic regions and from time to time. This Standard describes a generic process for obtaining and preparing sample...view more

    • sale 15% off
    • Standard
      126 pages
      English and French language

IEC 62321-5:2013 describes the four test methods for lead, cadmium and chromium in polymers, metals and electronics, namely AAS (atomic absorption spectrometry), AFS (atomic fluorescence spectrometry), ICP-OES (inductively coupled plasma optical emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry) as well as several procedures for preparing the sample solution from which the most appropriate method of analysis can be selected by experts.
It has the status of a horiz...
view more

    • sale 15% off
    • Standard
      75 pages
      English and French language

IEC 62321-3-2:2013 specifies the screening analysis of the total bromine (Br) in homogeneous materials found in polymers and electronics by using the analytical technique of combustion ion chromatography (C-IC).
It has the status of a horizontal standard in accordance with IEC Guide 108.

    • sale 15% off
    • Standard
      64 pages
      English and French language

IEC 62321-3-1:2013 describes the screening analysis of five substances, specifically lead (Pb), mercury (Hg), cadmium (Cd), total chromium (Cr) and total bromine (Br) in uniform materials found in electrotechnical products, using the analytical technique of X-ray fluorescence (XRF) spectrometry.
IEC 62321-3-1:2013 has the status of a horizontal standard in accordance with IEC Guide 108.

    • sale 15% off
    • Standard
      82 pages
      English and French language

IEC 62321-4:2013 describes the use of four test methods for mercury in polymers, metals and electronics, namely CV-AAS (cold vapour atomic absorption spectrometry), CV-AFS (cold vapour atomic fluorescence spectrometry) ICP-OES (inductively coupled plasma optical emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry) as well as several procedures for preparing the sample solution from which the most appropriate method of analysis can be selected by experts.
It has the ...
view more

    • sale 15% off
    • Standard
      51 pages
      English and French language

IEC 62321-1:2013 refers to the sample as the object to be processed and measured. The nature of the sample and the manner in which it is acquired is defined by the entity carrying out the tests and not by this standard. It provides guidance on the disassembly procedure employed for obtaining a sample. This first edition of IEC 62321-1 is a partial replacement of IEC 62321, forming a structural revision and replacing Clauses 1 to 4.
IEC 62321-1:2013 has the status of a horizontal standard in acc...
view more

    • sale 15% off
    • Standard
      34 pages
      English and French language

IEC/TR 62725:2013(E) is intended to provide users with guidance to understand methodologies and to evaluate carbon footprint of products (hereinafter referred to as CFP), by quantifying the greenhouse gases (GHG) emissions (hereinafter referred to as CFP study) for Electrical and Electronic products (hereinafter referred to as EE products) based on life-cycle thinking. It is applicable to any type of EE products, which are new or modified (e.g. reconditioned, upgraded, etc.) and is based on the ...view more

    • sale 15% off
    • Technical report
      75 pages
      English language

IEC/TR 62635:2012(E) provides a methodology for information exchange involving EEE manufacturers and recyclers, and for calculating the recyclability and recoverability rates to provide information to recyclers to enable appropriate and optimized EoL treatment operations, provide sufficient information to characterize activities at EoL treatment facilities in order to enable manufacturers to implement effective ECD, evaluate the recyclability and recoverability rates based on product attributes ...view more

    • sale 15% off
    • Technical report
      32 pages
      English language

IEC/TR 62476:2010(E) provides a framework for the use of internationally accepted standards, tools and practices to evaluate electrical and electronic products with respect to restricted substances. It can also be applied to declarable substances which are not restricted in electrical and electronic products. It provides guidance on how technical documentation and relevant evaluation and control methods should be selected and applied for restricted or declarable substances of any producer's prod...view more

    • sale 15% off
    • Technical report
      19 pages
      English language