65.040.10 - Livestock buildings, installations and equipment

This document specifies minimum performance and information requirements for monitoring devices of bulk milk cooling tanks as part of milking and milk cooling machinery installations in agricultural operations. It also specifies the minimum requirements for materials, design and installation. The purpose of this document is to contribute to a high-quality milk production by monitoring, collecting data and providing alarms with respect to defined parameters of the milk cooling, storage and cleani...view more

TC 61 advise on 2016-02-01: Common modifications needed but experts on these products not yet detected and not declared their availability to prepare a suitable proposal

This part of IEC 60335 deals with the safety of electric fence energizers, the rated voltage
of which is not more than 250 V and by means of which fence wires in agricultural, domestic
or feral animal control fences and security fences may be electrified or monitored.

2015-03-11: PR=24832 covering CMs to EN 60335-2-76:2005/FprA2:2013 merged in A2:2015 * FprAE (23101)  also merged with 23990

1.1   This European Standard specifies requirements for design, performance, safety and hygiene of refrigerated bulk milk coolers and the related methods of test.
This standard deals with all significant hazards, hazardous situations and events relevant to bulk milk coolers on farms, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
It applies to refrigerated bulk milk tanks with air cooled condensing units and ...view more

This International Standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, domestic or feral animal control fences and security fences may be electrified or monitored.

To be implemented in all countries with exception of CH * See D129/130 (new implementation dates) and D129/131 (not to be published before 2008-01-01)

This document specifies the requirements for reinforced and  prestressed precast concrete floor slats used in slatted floors  for the housing of livestock and provides for the evaluation of  conformity of these products. This document does not cover  slats for loadings other than stock and stockmen.

This European Standard specifies the requirements for reinforced and prestressed precast concrete floor slats used in slatted floors for the housing of livestock and provides for the evaluation of conformity of these products. This standard does not cover slats for loadings other than stock and stockmen.

Amandma A1:2007 je dodatek k standardu SIST EN 60335-2-70:2003
Deals with the safety of milking machines, to be used in stalls and in the open, that are designed for milking farm animals, such as cows, the rated voltage of the milking machines being not more than 250 V for single-phase operation and 480 V for other operations.

ISO 20966:2007 specifies requirements for the construction of automatic milking installations (AMI), including specific safety and hygiene aspects and minimum performance requirements and testing, in addition to those described in ISO 5707 and ISO 6690. It does not contain requirements for the design of the building in which the milking installation is installed.

ISO 6690:2007 specifies mechanical tests for milking machine installations in order to verify compliance of an installation or component with the requirements of ISO 5707. It also stipulates the accuracy requirements for the measuring instruments. ISO 6690:2007 is applicable for testing new installations and for periodic checking of installations for efficiency of operation. Alternative test methods may be applicable if they can be shown to achieve comparable results. The test procedures describ...view more

ISO 5707:2007 specifies the minimum performance and information requirements and certain dimensional requirements for satisfactory functioning of milking machines, for milking and cleaning. It also specifies minimum requirements for materials, design, manufacture and installation. ISO 5707:2007 is applicable to milking machines for milking cows, water buffaloes, sheep and goats where animals are milked with pulsation created by vacuum, and where milk is, at least partly, transported with the hel...view more

Incorporates EN 60335-2-76:2005/prAA (pr=16650)

Applicable to the safety of electric fence energizers, the rated voltage of which is not more than 250 V.

Deals with milking machines for milking farm animals, for use in stalls or in the open. Examples are bucket and direct-to-can milking machines, milking pipeline machines, recorder milking machines. The rated voltage is less than 250 V for single-phase operation and 480 V for other operations.

Specifies certain requirements for design, construction and performance of refrigerated tanks and the related of test. It does not deal with electrical safety regulations. Applies to refrigerated tanks with automatic control intended for fixed or mobile installation in farms or at milk collecting points. It only applies to tanks for two milkings (24 h) and four milkings (48 h).

Specifies requirements for the characteristics, dimensions, methods of installation and safety of closed- circuit conveyors. Applies to evacuation devices fitted with scrapers, moving continuously in a closed circuit, inteded to remove solid and liquid manure collected in non- grid covered channels in enclosed stalls. It applies to elevators only in so far as these from part of the circuit.

Applicable to the safety of electric fence energizers, the rated voltage of which is not more than 250 V.