prEN 14717

Welding and allied processes - Environmental check list

This document provides check lists for the assessment of the environmental aspects of welding fabrication of metallic materials including site and repair work. Informative annexes indicate recommended actions for avoiding and reducing the possible environmental impacts outside the workshop.

Schweißen und verwandte Prozesse - Umweltcheckliste

Dieses Dokument legt Checklisten zum Bewerten von Umweltaspekten bei der Schweißfertigung von metallischen Werkstoffen einschließlich Arbeiten auf Baustellen und Reparatur fest. Die informativen Anhänge enthalten empfohlene Maßnahmen zum Vermeiden und Reduzieren von möglichen Umweltbelastungen außerhalb der Werkstatt.

Soudage et techniques connexes - Liste de vérification relative à l'environnement

Le présent document fournit des listes de vérification pour l’évaluation des aspects environnementaux de la fabrication par soudage faisant intervenir des matériaux métalliques, y compris les travaux sur site et la réparation. Des Annexes informatives indiquent les actions recommandées permettant d’éviter ou de réduire les possibles impacts sur l’environnement en dehors de l’atelier de fabrication.

Varjenje in sorodni postopki - Okoljski kontrolni vprašalnik

General Information

• Status: Not Published
• Publication Date: 01-Jun-2022
• Withdrawal Date: 01-Sep-2022
• ICS: 13.020.01 - Environment and environmental protection in general
• ICS: 25.160.01 - Welding, brazing and soldering in general
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 25-Oct-2023
• Due Date: 13-Jan-2022
• Completion Date: 25-Oct-2023
• Directive: 2019/1784 - COMMISSION REGULATION (EU) 2019/1784 of 1 October 2019 laying down ecodesign requirements for welding equipment pursuant to Directive 2009/125/EC of the European Parliament and of the Council
• Mandate: M/559 - [C(2018) 3309 final] Ecodesign requirements for welding equipment
• Ref Project: oSIST prEN 14717:2021 - Welding and allied processes - Environmental check list

Relations

• Revises: EN 14717:2005 - Welding and allied processes - Environmental check list
• Effective Date: 08-Apr-2020

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14717:2021
01-marec-2021
Varjenje in sorodni postopki - Kontrolni vprašalnik/seznam v zvezi z okoljem
Welding and allied processes - Environmental check list
Schweißen und verwandte Prozesse - Umweltcheckliste
Soudage et techniques connexes - Liste de vérification relative à l'environnement
Ta slovenski standard je istoveten z: prEN 14717
ICS:
13.020.01 Okolje in varstvo okolja na Environment and
splošno environmental protection in
general
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
oSIST prEN 14717:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14717:2021

---------------------- Page: 2 ----------------------
oSIST prEN 14717:2021


DRAFT
EUROPEAN STANDARD
prEN 14717
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2021
ICS Will supersede EN 14717:2005
English Version

Welding and allied processes - Environmental check list
Soudage et techniques connexes - Liste de vérification Schweißen und verwandte Prozesse -
relative à l'environnement Umweltcheckliste
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14717:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14717:2021
prEN 14717:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Procedures. 6
5 Check lists of possible environmental aspects . 7
Annex A (informative) Assessment and recommended actions. 10
Annex B (informative) Requirements . 15
Annex ZA (informative) Relationship between this European Standard and the ecodesign
requirements of Commission Regulation (EU) No 2019/1784 aimed to be covered . 16
Bibliography . 17

2

---------------------- Page: 4 ----------------------
oSIST prEN 1471
...