EN 13906-1:2002
(Main)Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs
This standard specifies the calculation and design of cylindrical helical compression springs with a linear characteristic, made from round wire and bar of constant diameter with values according to table 1, and in respect of which the principal loading is applied in the direction of the spring axis. NOTE Quality Standards for compression spings will be developed later.
Zylindrische Schraubenfedern aus runden Drähten und Stäben - Berechnung und Konstruktion - Teil 1: Druckfedern
Diese Norm gilt für die Berechnung und Konstruktion von zylindrischen Schraubendruckfedern mit linearer Kennlinie aus runden Drähten und Stäben mit konstantem Durchmesser, mit Werten nach Tabelle 1, bei denen die Hauptbeanspruchung in Richtung der Federachse aufgebracht wird. ANMERKUNG Gütenormen für Druckfedern werden später erarbeitet.
Ressorts hélicoïdaux cylindriques fabriqués à partir de fils ronds et de barres - Calcul et conception - Partie 1: Ressorts de compression
La présente norme spécifie le calcul et la conception des ressorts de compress ion hélicoïdaux cylindriques de caractéristiques linéaires fabriqués à partir de fils ronds et de barres, de diamètre constant ayant les valeurs du tableau 1, pour lesquels la sollicitation majeure est appliquée dans la direction de l'axe du ressort. NOTE Des normes sur la qualité des ressorts de compression seront développées ultérieurement.
Vijačne valjaste vzmeti iz okrogle žice in palic - Izračun in načrtovanje - 1. del: Tlačne vzmeti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zylindrische Schraubenfedern aus runden Drähten und Stäben - Berechnung und Konstruktion - Teil 1: DruckfedernRessorts hélicoïdaux cylindriques fabriqués à partir de fils ronds et de barres - Calcul et conception - Partie 1: Ressorts de compressionCylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs21.160VzmetiSpringsICS:Ta slovenski standard je istoveten z:EN 13906-1:2002SIST EN 13906-1:2009en,fr,de01-julij-2009SIST EN 13906-1:2009SLOVENSKI
STANDARD
SIST EN 13906-1:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13906-1April 2002ICS 21.160English versionCylindrical helical springs made from round wire and bar -Calculation and design - Part 1: Compression springsRessorts hélicoïdaux cylindriques fabriqués à partir de filsronds et de barres - Calcul et conception - Partie 1:Ressorts de compressionZylindrische Schraubenfedern aus runden Drähten undStäben - Berechnung und Konstruktion - Teil 1:DruckfedernThis European Standard was approved by CEN on 5 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13906-1:2002 ESIST EN 13906-1:2009
EN 13906-1:2002 (E)2Contents1Scope.42Normative references.43Terms, definitions, symbols, units and abbreviated terms.53.1Terms and definitions.53.2Symbols, units and abbreviated terms.64Theoretical compression spring diagram.85Design principles.86Types of Loading.96.1Static and/or quasi-static loading.96.2Dynamic loading.96.3Operating temperature.96.4Transverse loading.106.5Buckling.106.6Impact loading.106.7Other factors.107Stress correction factor k.118Material property values for the calculation of
springs.129Calculation formulae
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.