EN IEC 60153-4:2022

Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides

This part of IEC 60153 specifies straight hollow metallic tubing of circular cross section for use as waveguides in electronic equipment. The aim of this recommendation is to specify the hollow metallic waveguides: a) the details necessary to ensure compatibility and, as far as essential, interchangeability; b) test methods; c) uniform requirements for the electrical and mechanical properties. It should be noted that no recommendations are made for the materials to be used for waveguides. The choice of material is to be agreed upon by customer and manufacturer. This document should be read in conjunction with IEC 60153-1, which gives general requirements and test methods.

Metallische Hohlleiter - Teil 4: Einzelbestimmungen für Rundhohlleiter

Guides d'ondes métalliques creux - Partie 4: Spécifications applicables aux guides d’ondes circulaires

lEC 60153-4:2022 spécifie des tubes métalliques creux rectilignes de section circulaire destinés à être utilisés comme guides d’ondes dans les matériels électroniques. Le présent document a pour but de spécifier les guides d’ondes métalliques creux en donnant: a) les détails nécessaires pour assurer la compatibilité et, dès lors que c’est essentiel, l’interchangeabilité; b) les méthodes d’essai; c) des exigences uniformes pour les propriétés électriques et mécaniques. Le présent document est destiné à être lu conjointement avec l’IEC 60153-1, qui fournit les exigences générales et les méthodes d’essai. Cette quatrième édition annule et remplace la troisième édition parue en 2017. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a. modification du système de désignation des petits guides d’ondes circulaires (par exemple C 25.5k au lieu de C 25500); b. révision du Tableau 1: - correction de la désignation de deux guides d’ondes (désormais C 1.2k et C 12k); - correction du diamètre de trois guides d’ondes (C 140, C 1.4k et C 14k); - resserrement des tolérances sur les diamètres intérieurs des guides d’ondes de dimensions inférieures à celles du type C 890; - suppression des valeurs d’affaiblissement des guides d’ondes pour l’aluminium, l’or et le laiton; c. suppression du Tableau 2 (duplication) et remplacement par le tableau des guides d’ondes de tailles intermédiaires initialement prévu à cet emplacement; d. ajout d’une équation pour le calcul de l’affaiblissement des guides d’ondes quel que soit le matériau dont ils sont constitués.

Votli kovinski valovodi - 4. del: Ustrezne specifikacije za krožne valovode (IEC 60153-4:2022)

Ta del standarda IEC 60153 določa ravne votle kovinske cevi s krožnim prečnim prerezom, ki se uporabljajo kot valovodi v elektronski opremi.
S tem priporočilom se za votle kovinske valovode določa:
a) potrebne podrobnosti za zagotovitev združljivosti in, kolikor je nujno, medsebojne zamenljivosti;
b) preskusne metode;
c) enotne zahteve za električne in mehanske lastnosti.
Opozoriti je treba, da niso podana priporočila glede materialov, ki se uporabljajo za valovode. O izbiri materiala se dogovorita kupec in proizvajalec.
Ta dokument naj bi se bralo v povezavi s standardom IEC 60153-1, ki določa splošne zahteve in preskusne metode.

General Information

• Status: Published
• Publication Date: 28-Jul-2022
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: CLC/SR 46F - RF and microwave passive components
• Drafting Committee: IEC/SC 46F - IEC_SC_46F
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 29-Jul-2022
• Completion Date: 29-Jul-2022
• Ref Project: SIST EN IEC 60153-4:2022 - Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides (IEC 60153-4:2022)

Relations

• Replaces: EN 60153-4:2017 - Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
• Effective Date: 24-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60153-4:2022
01-oktober-2022
Nadomešča:
SIST EN 60153-4:2018
Votli kovinski valovodi - 4. del: Ustrezne specifikacije za krožne valovode (IEC
60153-4:2022)
Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides (IEC
60153-4:2022)
Metallische Hohlleiter - Teil 4: Einzelbestimmungen für Rundhohlleiter (IEC 60153-
4:2022)
Guides d'ondes métalliques creux - Partie 4: Spécifications particulières pour les guides
d'ondes circulaires (IEC 60153-4:2022)
Ta slovenski standard je istoveten z: EN IEC 60153-4:2022
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN IEC 60153-4:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60153-4:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 60153-4:2022


EUROPEAN STANDARD EN IEC 60153-4

NORME EUROPÉENNE

EUROPÄISCHE NORM July 2022
ICS 33.120.10 Supersedes EN 60153-4:2017
English Version
Hollow metallic waveguides - Part 4: Relevant specifications for
circular waveguides
(IEC 60153-4:2022)
Guides d'ondes métalliques creux - Partie 4: Spécifications Metallische Hohlleiter - Teil 4: Einzelbestimmungen für
applicables aux guides d'ondes circulaires Rundhohlleiter
(IEC 60153-4:2022) (IEC 60153-4:2022)
This European Standard was approved by CENELEC on 2022-07-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60153-4:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60153-4:2022
EN IEC 60153-4:2022 (E)
European foreword
The text of document 46F/616/FDIS, future edition 4 of IEC 60153-4, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60153-4:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-14
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-14
document have to be withdrawn

This document supersedes EN 60153-4:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60153-4:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60153-2:2016 NOTE Harmonized as EN 60153-2:2016 (not modified)
ISO/IEC 17025:2017 NOTE Harmonized as EN ISO/IEC 17025:2017 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60153-4:2022
EN IEC 60153-4:2022 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document
...