EN 60204-1:2018/prA1:2020
(Amendment)Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Not available
Sicherheit von Maschinen - Elektrische Ausrüstung von Maschinen - Teil 1: Allgemeine Anforderungen
Sécurité des machines - Équipement électrique des machines - Partie 1: Exigences générales
Varnost strojev - Električna oprema strojev - 1. del: Splošne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60204-1:2018/oprA1:2021
01-januar-2021
Varnost strojev - Električna oprema strojev - 1. del: Splošne zahteve
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Sicherheit von Maschinen - Elektrische Ausrüstung von Maschinen - Teil 1: Allgemeine
Anforderungen
Sécurité des machines - Équipement électrique des machines - Partie 1: Exigences
générales
Ta slovenski standard je istoveten z: EN 60204-1:2018/prA1:2020
ICS:
13.110 Varnost strojev Safety of machinery
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 60204-1:2018/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60204-1:2018/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 60204-1:2018/oprA1:2021
44/884/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60204-1/AMD1 ED6
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-11-27 2021-02-19
SUPERSEDES DOCUMENTS:
44/873A/CD, 44/880A/CC
IEC TC 44 : SAFETY OF MACHINERY - ELECTROTECHNICAL ASPECTS
SECRETARIAT: SECRETARY:
United Kingdom Mrs Nyomee Hla-Shwe Tun
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
TITLE:
Amendment 1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2020 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 60204-1:2018/oprA1:2021
IEC CDV 60204-1 A1 Ed6 © IEC 2020 -2- 44/884/CDV
1 FOREWORD
2 This amendment has been prepared by IEC technical committee 44: Safety of machinery –
3 Electrotechnical aspects.
4 The text of this amendment is based on the following documents:
5 FDIS
6 Report on voting
7 44/XX/FDIS
8 44/XX/RVD
9 Full information on the voting for the approval of this amendment can be found in the report on voting
10 indicated in the above table.
11 The committee has decided that the contents of this amendment and the base publication will remain
12 unchanged until the maintenance result date1 indicated on the IEC web site under
13 "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will
14 be
15 • reconfirmed,
16 • withdrawn,
17 • replaced by a revised edition, or
18 • amended.
19
---------------------- Page: 4 ----------------------
SIST EN 60204-1:2018/oprA1:2021
44/884/CDV -3- IEC CDV 60204-1 A1 Ed6 © IEC 2020
20 Foreword
th th
21 Replace the 7 item under the 8 paragraph with:
22 6.3.3 b): The use of residual current protective devices with a rated residual operating current which
23 is coordinated with the earth electrode resistance is mandatory in TT systems as a means
24 for fault protection by automatic disconnection of supply (Italy).
25
26 Rename existing Note to Note 1 and add new Note 2
27 Note 2 Annex H provides examples of measures to reduce the effects of electromagnetic influences.
28
29 2 Normative References
30 Delete existing reference to IEC 60034-1
31 Replace the existing reference IEC 60364-4-41 with:
32 IEC 60364-4-41:2005, Low-voltage electrical installations – Part 4-41: Protection for safety – Protection
33 against electric shock
34 IEC 60364-4-41:2005/AMD1:2017
35 Replace the existing reference IEC 60364-5-52 with:
36 IEC 60364-5-52:2009, Low-voltage electrical installations – Part 5-52: Selection and erection of
37 electrical equipment – Wiring systems
38 IEC 60364-5-52:2009/COR1:2011
39 Replace the existing reference IEC 60364-5-53 with:
40 IEC 60364-5-53:2019, Electrical installations of buildings – Part 5-53: Selection and e
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.