EN 62745:2017

Safety of machinery - Requirements for cableless control systems of machinery

IEC 62745:2017(E) specifies requirements for the functionality and interfacing of cableless (for example, radio, infra-red) control systems that provide communication between operator control station(s) and the control system of a machine. Specific requirements are included for such operator control stations that are portable by the operator.

Sicherheit von Maschinen - Anforderungen für kabellose Steuerungen an Maschinen

Sécurité des machines - Exigences générales pour les systèmes de commande sans fil des machines

IEC 62745:2017 spécifie les exigences de fonctionnalité d'un système de commande sans fil, qu'il soit interfacé avec ou qu'il fasse partie intégrante d'un système de commande de machine destiné à être utilisé comme poste de commande opérateur sur une machine.

Varnost strojev - Splošne zahteve za brezžično povezavo upravljalnikov e nadzornih sistemov strojev (IEC 62745:2017)

Standard IEC 62745:2017 določa zahteve za funkcionalnost in brezžično povezavo (npr. radijskih, infrardečih) nadzornih sistemov, ki zagotavljajo komunikacijo med nadzornimi postajami operaterja in nadzornim sistemom stroja. Posebne zahteve so vključene za takšne nadzorne postaje operaterja, ki jih lahko operater prenaša.

General Information

• Status: Published
• Publication Date: 01-Jun-2017
• Withdrawal Date: 10-Apr-2020
• ICS: 13.110 - Safety of machinery
• ICS: 29.020 - Electrical engineering in general
• ICS: 35.100.01 - Open systems interconnection in general
• Technical Committee: CLC/TC 44X - Safety of machinery: electrotchnical aspects
• Drafting Committee: IEC/TC 44 - IEC_TC_44
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 02-Jun-2017
• Completion Date: 02-Jun-2017
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 62745:2017 - Safety of machinery - General requirements for cableless control systems of machinery (IEC 62745:2017)

Relations

• Amended By: EN 62745:2017/A11:2020 - Safety of machinery - Requirements for cableless control systems of machinery
• Effective Date: 24-Dec-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62745:2017
01-december-2017
9DUQRVWVWURMHY6SORãQH]DKWHYH]DEUH]åLþQRSRYH]DYRXSUDYOMDOQLNRYH
QDG]RUQLKVLVWHPRYVWURMHY,(&
Safety of machinery - General requirements for cableless control systems of machinery
(IEC 62745:2017)
Sicherheit von Maschinen - Anforderungen für kabellose Steuerungen an Maschinen
(IEC 62745:2017)
6pFXULWpGHVPDFKLQHV±([LJHQFHVJpQpUDOHVSRXUOHVV\VWqPHVGHFRPPDQGHVDQVILO
GHVPDFKLQHV,(&
,(&
Ta slovenski standard je istoveten z: EN 62745:2017
ICS:
13.110 Varnost strojev Safety of machinery
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST EN 62745:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62745:2017

---------------------- Page: 2 ----------------------

SIST EN 62745:2017


EUROPEAN STANDARD EN 62745

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2017
ICS 13.110; 29.020; 35.100.01

English Version
Safety of machinery - Requirements for cableless control
systems of machinery
(IEC 62745:2017)
Sécurité des machines - Exigences générales pour les Sicherheit von Maschinen - Anforderungen für kabellose
systèmes de commande sans fil des machines Steuerungen an Maschinen
(IEC 62745:2017) (IEC 62745:2017)
This European Standard was approved by CENELEC on 2017-04-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62745:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62745:2017
EN 62745:2017
European foreword
The text of document 44/783/FDIS, future edition 1 of IEC 62745, prepared by IEC/TC 44 “Safety of
machinery - Electrotechnical aspects" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62745:2017.

The following dates are fixed:
(dop) 2018-01-11
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-04-11
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62745:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-1 NOTE Harmonized as EN 60068-2-1.
IEC 60068-2-2 NOTE Harmonized as EN 60068-2-2.
IEC 60068-2-6 NOTE Harmonized as EN 60068-2-6.
IEC 60068-2-27 NOTE Harmonized as EN 60068-2-27.
IEC 60068-2-30 NOTE Harmonized as EN 60068-2-30.
IEC 60068-2-64 NOTE Harmonized as EN 60068-2-64.
IEC 60204 (Series) NOTE Harmonized as EN 60204 (Series).
IEC 60870-5-1 NOTE Harmonized as EN 60870-5-1.
IEC 60947-5-8 NOTE Harmonized as EN 60947-5-8.
IEC 61508 (Series) NOTE Harmonized as EN 61508 (Series).
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-3:2016 NOTE Harmonized as EN 61784-3:2016.
ISO 12100 NOTE Harmonized as EN ISO 12100.

2

---------------------- Page: 4 ----------------------

SIST EN 62745:2017
EN 62745:2017

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publication
...