EN 62442-2:2014

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear

IEC 62442-2:2014 defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding fluorescent lamps). Also a calculation method of the efficiency for controlgear for high intensity discharged lamp(s) is defined.

Energieeffizienz von Lampenbetriebsgeräten - Teil 2: Betriebsgeräte für Hochdruck-Entladungslampen (ausgenommen Leuchtstofflampen) - Messverfahren zur Bestimmung des Wirkungsgrades von Betriebsgeräten

Performance énergétique des appareillages de lampes - Partie 2: Appareillages des lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence) - Méthode de mesure pour la détermination du rendement des appareillages

L'IEC 62442-2:2014 définit une méthode de mesure des pertes de puissance de l'appareillage électromagnétique, de la puissance d'entrée totale et de la puissance de veille de l'appareillage électronique pour les lampes à décharge à haute intensité (à l'exclusion des lampes à fluorescence). Elle définit également une méthode de calcul du rendement des appareillages de lampe(s) à décharge à haute intensité.

Energijska učinkovitost krmilnih naprav za sijalke - 2. del: Krmilne naprave za visokointenzivnostne razelektritvene sijalke (razen fluorescenčne sijalke) - Merilna metoda za ugotavljanje učinkovitosti krmilnih naprav

Standard EN IEC 62442-2 določa metodo merjenja izgub moči elektromagnetnih krmilnih naprav, skupne vhodne moči in moči elektronskih krmilnih naprav v stanju pripravljenosti za visokointenzivnostne razelektritvene sijalke (razen fluorescenčnih sijalk). Določena je tudi metoda za izračun učinkovitosti elektronskih krmilnih naprav za visokointenzivnostne razelektritvene sijalke. Ta mednarodni standard se uporablja za krmilna vezja, ki so sestavljena izključno iz elektronskih krmilnih naprav in sijalk.

General Information

• Status: Withdrawn
• Publication Date: 22-May-2014
• Withdrawal Date: 21-May-2017
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Aug-2021
• Completion Date: 10-Aug-2021
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Directive: 245/2009 - Commission Regulation (EC) No 245/2009 of 18 March 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and of the Council (Text with EEA relevance)
• Mandate: M/495 - Standardisation mandate to CEN, CENELEC and ETSI under Directive 2009/125/EC relating to harmonised standards in the field of Ecodesign
• Ref Project: SIST EN 62442-2:2014 - Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear

Relations

• Replaced By: EN IEC 62442-2:2018 - Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
• Effective Date: 19-Jul-2016
• Amended By: EN 62442-2:2014/A11:2017 - Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62442-2:2014
01-september-2014
(QHUJLMVNDXþLQNRYLWRVWNUPLOQLKQDSUDY]DVLMDONHGHO.UPLOQHQDSUDYH]D
YLVRNRLQWHQ]LYQRVWQHUD]HOHNWULWYHQHVLMDONHUD]HQIOXRUHVFHQþQHVLMDONH0HULOQD
PHWRGD]DXJRWDYOMDQMHXþLQNRYLWRVWLNUPLOQLKQDSUDY
Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge
lamps (excluding fluorescent lamps) - Method of measurement to determine the
efficiency of controlgear
/
Performance énergétique des appareillages de lampes - Partie 2: Appareillages des
lampes à décharge à haute intensité (à l’exclusion des lampes à fluorescence) -
Méthode de mesure pour la détermination du rendement des appareillages
Ta slovenski standard je istoveten z: EN 62442-2:2014
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 62442-2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62442-2:2014

---------------------- Page: 2 ----------------------

SIST EN 62442-2:2014


EUROPEAN STANDARD EN 62442-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2014
ICS 29.140.99

English Version
Energy performance of lamp controlgear - Part 2: Controlgear for
high intensity discharge lamps (excluding fluorescent lamps) -
Method of measurement to determine the efficiency of the
controlgear
(IEC 62442-2:2014)
Performance énergétique des appareillages de lampes - Energieeffizienz von Lampenbetriebsgeräten - Teil 2:
Partie 2: Appareillages des lampes à décharge à haute Betriebsgeräte für Hochdruck-Entladungslampen
intensité (à l'exclusion des lampes à fluorescence) - (ausgenommen Leuchtstofflampen) - Messverfahren zur
Méthode de mesure pour la détermination du rendement Bestimmung des Wirkungsgrades von Betriebsgeräten
des appareillages (IEC 62442-2:2014)
(CEI 62442-2:2014)
This European Standard was approved by CENELEC on 2014-05-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62442-2:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62442-2:2014
EN 62442-2:2014 - 2 -

Foreword
The text of document 34C/1078/FDIS, future edition 1 of IEC 62442-2, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 62442-2:2014.

The following dates are fixed:
• latest date by which the document has (dop) 2015-02-22
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-05-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62442-2:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60188 NOTE Harmonised in EN 60188 (not modified).
IEC 60662 NOTE Harmonised in EN 60662 (not modified).
IEC 60923 NOTE Harmonised in EN 60923 (not modified).
IEC 61167 NOTE Harmonised in EN 61167 (not modified).
IEC 62035 NOTE Harmonised in EN 62035 (not modified).
IEC 62442-1:2011 NOTE Harmonised in EN 62442
...