Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

IEC 80601-2-58:2024 is available as IEC 80601-2-58:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 80601-2-58:2024 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of LENS REMOVAL DEVICES and VITRECTOMY DEVICES for ophthalmic surgery (as defined in 201.3.209 and 201.3.217) and associated ACCESSORIES that can be connected to this MEDICAL ELECTRICAL EQUIPMENT, hereafter referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document except in 7.2.13 of IEC 60601-1:2005 and IEC 60601 1:2005/AMD2:2020 and 8.4.1 of IEC 60601-1:2005. IEC 80601-2-58:2024 cancels and replaces the second edition published in 2014 and its Amendment 1:2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the alignment of this particular standard based on the amendment of IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020; b) updating collateral, particular and IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020 references to align with amendments to IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020 and other collateral standards; c) updated normative references; d) added new requirement for particulate matter from APPLIED PARTS in 201.9.5.101; e) adding the shadow light method in 201.12.1.101.7; f) clarify test conditions for EMC requirements in 202.7.1.2; g) updated Table D.4 references to include specific IEC references to the symbols and delete “Annex AA, 201.7.6.101”; h) include a new annex to address the relevant general safety and performance requirements of European regulation (EU) 2017/745 (Annex BB); i) remove all references of the LIQUEFACTION FRAGMENTATION LENS REMOVAL method.

Medizinische elektrische Geräte - Teil 2-58: Besondere Festlegungen für die Sicherheit einschließlich der wesentlichen Leistungsmerkmale für Geräte zur Linsenentfernung und Geräte zur Glaskörperentfernung in der Augenchirurgie

Appareils électromédicaux - Partie 2-58: Exigences particulières pour la sécurité de base et les performances essentielles des dispositifs de retrait du cristallin et des dispositifs de vitrectomie pour la chirurgie ophtalmique

IEC 80601-2-58:2024 est disponible sous forme de IEC 80601-2-58:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 80601-2-58:2024 s’applique à la SECURITE DE BASE et aux PERFORMANCES ESSENTIELLES des DISPOSITIFS DE RETRAIT DU CRISTALLIN et des DISPOSITIFS DE VITRECTOMIE pour la chirurgie ophtalmique (comme cela est défini en 201.3.209 et 201.3.217) et des ACCESSOIRES liés qui peuvent être raccordés à ces APPAREILS ELECTROMEDICAUX, désignés ci-après comme APPAREILS EM. Lorsqu’un article ou un paragraphe est spécifiquement destiné à être applicable uniquement aux APPAREILS EM ou uniquement aux SYSTEMES EM, le titre et le contenu de cet article ou de ce paragraphe l’indiquent. Si ce n’est pas le cas, l’article ou le paragraphe s’applique à la fois aux APPAREILS EM et aux SYSTEMES EM, selon le cas. Les DANGERS inhérents à la fonction physiologique prévue des APPAREILS EM ou des SYSTEMES EM dans le cadre du domaine d’application du présent document ne sont pas couverts par des exigences spécifiques contenues dans le présent document, à l’exception du 7.2.13 de l’IEC 60601-1:2005 et l’IEC 60601-1:2005/AMD2:2020 et du 8.4.1 de l’IEC 60601-1:2005. L'IEC 80601-2-58:2024 le et remplace la deuxième édition parue en 2014 et son Amendement 1:2016. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) alignement de la présente norme particulière sur la base des amendements de l’IEC 60601-1:2005, l'IEC 60601-1:2005/AMD1:2012 et de l'IEC 60601-1:2005/AMD2:2020; b) mise à jour des références à l’IEC 60601-1:2005, l'IEC 60601-1:2005/AMD1:2012 et l'IEC 60601-1:2005/AMD2:2020 et aux normes particulières et collatérales pour les aligner sur les amendements de l’IEC 60601-1:2005, l'IEC 60601-1:2005/AMD1:2012 et l'IEC 60601-1:2005/AMD2:2020 et des autres normes collatérales; c) mise à jour des références normatives; d) ajout d’une nouvelle exigence relative aux corps solides qui proviennent des PARTIES APPLIQUEES dans le 201.9.5.101; e) ajout de la méthode de la lumière rasante dans le 201.12.1.101.7; f) clarification des conditions d’essai pour les exigences de CEM dans le 202.7.1.2; g) mise à jour des références du Tableau D.4 pour inclure les références IEC spécifiques aux symboles et supprimer le "201.7.6.101" existant de l’"Annexe AA"; h) inclusion d’une nouvelle annexe pour couvrir les exigences générales pertinentes en matière de sécurité et de performances du règlement européen (UE) 2017/745 (Annexe BB). i) suppression de toutes les références à la méthode de RETRAIT DU CRISTALLIN au moyen de la FRAGMENTATION PAR LIQUEFACTION.

Medicinska električna oprema - 2-58. del: Posebne zahteve za osnovno varnost in bistvene lastnosti naprav za odstranjevanje leč in naprav za vitrektomijo pri očesni kirurgiji

General Information

Status
Not Published
Publication Date
03-Mar-2024
Current Stage
5060 - Voting results sent to TC, SR - Formal Approval
Start Date
24-Nov-2023
Completion Date
24-Nov-2023

Relations

Buy Standard

Draft
prEN IEC 80601-2-58:2022
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 80601-2-58:2022
01-november-2022
Medicinska električna oprema - 2-58. del: Posebne zahteve za osnovno varnost in
bistvene lastnosti naprav za odstranjevanje leč in naprav za vitrektomijo pri očesni
kirurgiji
Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and
essential performance of lens removal devices and vitrectomy devices for ophthalmic
surgery
Medizinische elektrische Geräte - Teil 2-58: Besondere Festlegungen für die Sicherheit
einschließlich der wesentlichen Leistungsmerkmale für Geräte zur Linsenentfernung und
Geräte zur Glaskörperentfernung in der Augenchirurgie
Appareils électromédicaux - Partie 2-58: Exigences particulières pour la sécurité de base
et les performances essentielles des dispositifs de retrait du cristallin et des dispositifs de
vitrectomie pour la chirurgie ophtalmique
Ta slovenski standard je istoveten z: prEN IEC 80601-2-58:2022
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
oSIST prEN IEC 80601-2-58:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 80601-2-58:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 80601-2-58:2022
62D/1969/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 80601-2-58 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-09-09 2022-12-02
SUPERSEDES DOCUMENTS:
62D/1914/CD, 62D/1936A/CC

IEC SC 62D : ELECTROMEDICAL EQUIPMENT
SECRETARIAT: SECRETARY:
United States of America Ms Ladan Bulookbashi
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.

TITLE:
Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential
performance of lens removal devices and vitrectomy devices for ophthalmic surgery

PROPOSED STABILITY DATE: 2028

NOTE FROM TC/SC OFFICERS:

Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 80601-2-58:2022
62D/1969/CDV – 2 – IEC 80601-2-58:2022
 © IEC 2022
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 3
4 INTRODUCTION . 6
5 201.1 Scope, object and related standards . 8
6 201.2 Normative references . 10
7 201.3 Terms and definitions . 11
8 201.4 General requirements . 13
9 201.5 General requirements for testing of ME EQUIPMENT . 13
10 201.6 Classification of ME EQUIPMENT and ME SYSTEMS . 13
11 201.7 ME EQUIPMENT identification, marking and documents . 13
12 201.8 Protection against electrical HAZARDS from ME EQUIPMENT . 15
13 201.9 Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS . 15
14 201.10 Protection against unwanted and excessive radiation HAZARDS . 15
15 201.11 Protection against e
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.