EN 62442-3:2014
(Main)Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear
Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear
IEC 62442-3:2014 defines a measurement method for the power losses of magnetic transformers and the power losses with the standby power of electronic convertor for halogen lamps and LED modules. Also a calculation method of the efficiency for the mentioned controlgear for halogen lamps and LED modules is defined.
Energieeffizienz von Lampenbetriebsgeräten - Teil 3: Betriebsgeräte für Halogenlampen und LED-Module - Messverfahren zur Bestimmung des Wirkungsgrades des Betriebsgerätes
Performance énergétique des appareillages de lampes - Partie 3: Appareillage de lampes à halogène et modules de DEL - Méthode de mesure pour la détermination du rendement de l'appareillage
L'IEC 62442-3:2014 définit une méthode pour mesurer les pertes de puissances rencontrées par les transformateurs magnétiques et les convertisseurs électroniques en veille sur les lampes à halogène et les modules de DEL. Une méthode de calcul du rendement des appareillages mentionnés pour les lampes à halogène et les modules DEL est également définie.
Energijska učinkovitost krmilnih naprav za sijalke - 3. del: Krmilne naprave za halogenske sijalke in module LED - Merilna metoda za ugotavljanje učinkovitosti krmilne naprave (IEC 62442-3:2014)
Standard EN IEC 62442-3 določa metodo merjenja izgub moči magnetnih transformatorjev in izgub moči elektronskih pretvornikov v stanju pripravljenosti za halogenske sijalke in module LED. Definirana je tudi metoda za izračun učinkovitosti omenjenih krmilnih naprav za halogenske sijalke in module LED. Ta del standarda IEC 62442 se uporablja za električna krmilna vezja, ki so sestavljena izključno iz elektronskih krmilnih naprav in sijalk. Za večnamensko napajanje se upošteva le del o strelah. Standard določa merilno metodo za skupno vhodno moč, moč v stanju pripravljenosti in metodo za izračun učinkovitosti krmilnih naprav za vse krmilne naprave, ki se prodajajo za domačo uporabo in običajne komercialne namene ter delujejo s halogenskimi sijalkami in moduli LED.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62442-3:2014
01-oktober-2014
(QHUJLMVNDXþLQNRYLWRVWNUPLOQLKQDSUDY]DVLMDONHGHO .UPLOQHQDSUDYH]D
KDORJHQVNHVLMDONHLQPRGXOH/('0HULOQDPHWRGD]DXJRWDYOMDQMHXþLQNRYLWRVWL
NUPLOQHQDSUDYH ,(&
Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and
LED modules - Method of measurement to determine the efficiency of the controlgear
/
Performance énergétique des appareillages de lampes - Partie 3: Appareillage de
lampes à halogène et modules de DEL - Méthode de mesure pour la détermination du
rendement de l'appareillage
Ta slovenski standard je istoveten z: EN 62442-3:2014
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 62442-3:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62442-3:2014
---------------------- Page: 2 ----------------------
SIST EN 62442-3:2014
EUROPEAN STANDARD EN 62442-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 29.140.99
English Version
Energy performance of lamp controlgear - Part 3: Controlgear for
halogen lamps and LED modules - Method of measurement to
determine the efficiency of the controlgear
(IEC 62442-3:2014)
Performance énergétique des appareillages de lampes - Energieeffizienz von Lampenbetriebsgeräten - Teil 3:
Partie 3: Appareillage de lampes à halogène et modules de Betriebsgeräte für Halogenlampen und LED-Module -
DEL - Méthode de mesure pour la détermination du Messverfahren zur Bestimmung des Wirkungsgrades des
rendement de l'appareillage Betriebsgerätes
(CEI 62442-3:2014) (IEC 62442-3:2014)
This European Standard was approved by CENELEC on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62442-3:2014 E
---------------------- Page: 3 ----------------------
SIST EN 62442-3:2014
EN 62442-3:2014 - 2 -
Foreword
The text of document 34C/1077/FDIS, future edition 1 of IEC 62442-3, prepared by SC 34C
"Auxiliaries for lamps", of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 62442-3:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-03-01
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-05-29
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62442-3:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60357 NOTE Harmonized as EN 60357.
IEC 62384 NOTE Harmonized as EN 62384.
IEC 62442-1:2011 NOTE Harmonized as EN 62442-1:2011 (not modified).
IEC 62442-2:— NOTE Harmonized as EN 62442-2:2014 (not modified).
---------------------- Page: 4 ----------------------
SIST EN 62442-3:2014
- 3 - EN 62442-3:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this docume
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.