Electric motor-operated tools - Dust measurement procedure - Part 3-9: Particular requirements for transportable mitre saws

This clause of Part 1 is applicable, except as follows:
Addition:
This part of EN 50632 applies to transportable mitre saws intended to cut wood and wood-based materials.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 3-9: Besondere Anforderungen für transportable Gehrungskappsägen

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 3-9 : Exigences particulières pour les scies à onglets transportables

L’article de la Partie 1 est applicable avec l'exception suivante:
Addition:
La présente partie de l’EN 50632 s’applique aux scies à onglets transportables destinées à la découpe du bois ou de matériaux à base de bois.

Elektromotorna orodja - Postopek merjenja prahu - 3-9. del: Posebne zahteve za prenosne zajeralne žage

Ta del standarda EN 50632 se uporablja za prenosne zajeralne žage, namenjene za rezanje lesa in materialov iz lesa.

General Information

Status
Published
Publication Date
10-Jul-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Sep-2016
Due Date
19-Nov-2016
Completion Date
11-Jul-2017

RELATIONS

Buy Standard

Standard
SIST EN 50632-3-9:2017
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromotorna orodja - Postopek merjenja prahu - 3-9. del: Posebne zahteve za prenosne zajeralne žageOutils électriques à moteur - Procédure de mesure de la poussière - Partie 3-9 : Exigences particulières pour les scies à onglets transportablesElectric motor-operated tools - Dust measurement procedure - Part 3-9: Particular requirements for transportable mitre saws25.140.20Electric tools25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 50632-3-9:2016SIST EN 50632-3-9:2017en01-september-2017SIST EN 50632-3-9:2017SLOVENSKI

STANDARD
SIST EN 50632-3-9:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50632-3-9
September 2016 ICS 79.120.10; 13.040.40 English Version

Electric motor-operated tools - Dust measurement procedure - Part 3-9: Particular requirements for transportable mitre saws

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 3-9: Exigences particulières pour les scies à onglets transportables

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -Teil 3-9: Besondere Anforderungen für transportable Gehrungskappsägen This European Standard was approved by CENELEC on 2016-05-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization

Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,

B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 50632-3-9:2016 ESIST EN 50632-3-9:2017

EN 50632-3-9:2016 (E) 2 Contents European foreword .................................................................................................................................3 1 Scope ................................................................................................................................................4 2 Normative references ......................................................................................................................4 3 Terms and definitions .....................................................................................................................4 4 Test procedure ................................................................................................................................4 5 Instrumentation ...............................................................................................................................5 6 Information to be reported .............................................................................................................5 Tables Table 101 — Operating conditions for transportable mitre saws .....................................................5

SIST EN 50632-3-9:2017

EN 50632-3-9:2016 (E) 3 European foreword This document (EN 50632-3-9:2016) has been prepared by CLC/TC 116 "Safety of motor-operated electric tools". The following dates are fixed: • latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-05-03 • latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-05-03 Attention is drawn to the possibility that some of th

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.