AC connection devices for electric vehicle conductive charging

CENELEC Report * D122/065: Withdrawn

Netzsteckverbindungen für das konduktive Laden von Elektrofahrzeugen

Connecteurs pour la charge des véhicules électriques en courant alternatif

AC connection devices for electric vehicle conductive charging

General Information

Status
Withdrawn
Publication Date
30-Sep-2003
Withdrawal Date
20-Oct-2009
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Oct-2009
Due Date
12-Nov-2009
Completion Date
21-Oct-2009

Buy Standard

Standardization document
R069-001:2003
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST R069-001:2003

STANDARD
oktober 2003
AC connection devices for electric vehicle conductive charging
ICS 29.120.30; 43.120 Referenčna številka
SIST R069-001:2003(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

CENELEC R069-001
REPORT March 2002
English version
AC connection devices for electric vehicle
conductive charging
Connecteurs pour la charge des véhicules Netzsteckverbindungen für
électriques en courant alternatif das konduktive Laden von
Elektrofahrzeugen
This CENELEC Report has been prepared by the Technical Committee CENELEC TC 69X, Electrical
systems for electric road vehicles. It was approved by TC 69X on 2001-09-25 and endorsed by the
CENELEC Technical Board on 2001-12-04.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. R069-001:2002 E

---------------------- Page: 2 ----------------------

R069-001:2002 - 2 -
Foreword
Considering the lack of widespread connection devices meeting the requirements of EV charging
system in Europe, the CENELEC Technical Board asked Technical Committee TC 69X to prepare a
technical report based on the functional requirements of EN 61851-1.
The text of the draft was approved by TC 69X on 2001-09-25 and endorsed by the CENELEC
Technical Board on 2001-12-04.
CLC TC69X/WG3 is proposing, at this stage two different sets of requirements (characteristics and
compatibility requirements) for connection devices suitable for EV charging, corresponding to two
different approaches:
Approach 1: Electric vehicles should benefit from existing infrastructure. Compatibility requirements
allow them to be charged on widely used standardized socket-outlets and to optimize the power
transfer from the supply network.
Approach 2: Electric vehicles may only be charged on dedicated socket-outlets. The infrastructure
(connection devices, connection to the distribution system, communication links,.) permits only
mode 3 charging and prevents compatibility with existing socket outlets.
As a consequence, in this report two different types of specific connection devices are dealt with:
type 1 connection devices and type 2 connection devices.
WG3 has compared technical solutions proposed by the industry and proposed draft standard sheets
(in annexes).
The next step is to issue standard sheets in co-operation with IEC/SC23H/WG6. When this report was
prepared, the document circulated in IEC was 23H/95/NP (future IEC 62196).

---------------------- Page: 3 ----------------------

- 3 - R069-001:2002
Contents
1 Scope.4
2 References .4
3 Definitions.4
3.1 Definitions based on EN 61851-1.4
3.2 Other definitions .5
4 General .6
5 Electrical interface requirements.6
6 Connection devices type 1 .7
6.1 General.7
6.2 Design .7
6.3 Specific requirements for vehicle inlets.7
6.4 Overview of the connecting system.8
7 Connection devices type 2 .8
7.1 General.8
7.2 Design .8
7.3 Specific requirements for vehicle inlets.9
7.4 Overview of the connecting system.9
Annex A Concept sheet for connection devices type 1.10
Annex B Typical type 2 construction.11
Annex C Comparison between some known existing devices and technical solutions which
have been considered for the purpose of this report .16

---------------------- Page: 4 ----------------------

R069-001:2002 - 4 -
1 Scope
This Technical report applies to connection devices specially designed for the purpose of delivering
energy from the main supply to electric vehicles, jointly with additional control functions according to
EN 61851-1.
The aspects covered include characteristics and compatibility requirements :
Connection devices addressed by this report have the following characteristics :
− rated voltage: 230/400 V,
− rated current: up to 32 A per phase,
− single or three phases,
− suitable for mode 1, 2 and 3 (according to EN 61851-1).
Connection devices (accessories) include socket-outlet, plug, connector and vehicle inlet.
2 References
EN 60309-1, Plugs, socket-outlets and couplers for industrial purposes – Part 1: General requirements
EN 60309-2, Plugs, socket-outlets and couplers for industrial purposes – Part 2: Dimensional
interchangeability requirements for pin and contact tube accessories
EN 60320 (series), Appliance couplers for household and similar purposes
EN 60529:1991, Degrees of protection provided by enclosures (IP Code)
EN 61851-1:2001, Electric vehicle conductive charging system - Part 1: General requirements
IEC 60083, Plugs and socket-outlets for domestic and similar general use standardized in member
countries of IEC
1)
IEC 62196-1 , Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of
electric vehicle – Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
3 Definitions
3.1 Definitions based on EN 61851-1
3.1.1
EV supply equipment (EVSE)
the conductors, including the phase, neutral and protective earth conductors, the EV couplers,
attachment plugs, and all other accessories, devices, power outlets or apparatuses installed
specifically for the purpose of delivering energy from the premise wiring to the EV and allowing
communication between them if required
3.1.2
control pilot
the control conductor in the cable assembly connecting the in-cable control box or the fixed part of the
EVSE, and the EV earth through the control circuitry on the vehicle. It may be used to perform several
functions
———————
1)
In preparation.

---------------------- Page: 5 ----------------------

- 5 - R069-001:2002
3.1.3
Mode 1 charging
connection of the EV to the a.c. supply network (mains) utilizing standardized socket-outlets, rated up
to 16 A, at the supply side, single-phase or three-phase, and utilizing phase(s), neutral and protective
earth conductors
3.1.4
Mode 2 charging
connection of the EV to the a.c. supply network (mains) utilizing standardized socket-outlets, single-
phase or three-phase, and utilizing phase(s), neutral, and protective earth conductors together with a
control pilot conductor between the EV and the plug or in-cable control box
3.1.5
Mode 3 charging
direct connection of the EV to the a.c. supply network (mains) utilizing dedicated EVSE where the
control pilot conductor extends to equipment permanently connected to the a.c. supply network (mains)
are used.
3.1.6
Mode 4 charging
indirect connection of the EV to the a.c. supply network (mains) utilizing an off-board charger where the
control pilot conductor extends to equipment permanently connected to the a.c. supply
3.1.7
basic system of connection devices
system having a basic interface which provides for domestic a.c. only for modes 1, 2 and 3 charging
3.1.2
universal system of connection devices
system having a universal interface which provides for either high power a.c. and domestic a.c. or high
power d.c. and domestic a.c. for all modes of charging
3.2 Other definitions
For the purpose of this report, the following concepts are defined:
3.2.1
type 1
system in which an accessory can be inserted into the corresponding EN 60309-2 accessory with the
power contacts and earth engaging but without the auxiliary contacts necessarily present or engaging
3.2.2
type 2
system in which an accessory cannot be inserted into an accessory of any other system of IEC 60083
or EN 60309-2 or EN 60320
3.2.3
compatible systems
systems in which the connection devices fit together without necessarily providing all electrical
functions
3.2.4
interplugable systems
compatible systems of connection devices in which the plug (resp. connector) can be fully inserted in
the socket-outlet (resp. inlet)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.