Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
2018-11-02: this prA covers common mods to prEN IEC 62841-3-9 (PR=67950)

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-9: Besondere Anforderungen für transportable Gehrungskappsägen

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-9: Exigences particulières pour les scies à onglets transportables

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-9. del: Posebne zahteve za prenosne zajeralne žage - Dopolnilo A11

General Information

Status
Published
Publication Date
21-Jul-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2020
Due Date
05-Sep-2020
Completion Date
22-Jul-2020

RELATIONS

Buy Standard

Amendment
SIST EN IEC 62841-3-9:2020/A11:2020
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 62841-3-9:2020/A11:2020
01-oktober-2020

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-

9. del: Posebne zahteve za prenosne zajeralne žage - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden

machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 3-9: Besondere Anforderungen für
transportable Gehrungskappsägen

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -

Sécurité - Partie 3-9: Exigences particulières pour les scies à onglets transportables

Ta slovenski standard je istoveten z: EN IEC 62841-3-9:2020/A11:2020
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 Električna orodja Electric tools
SIST EN IEC 62841-3-9:2020/A11:2020 en,fr

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62841-3-9:2020/A11:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 62841-3-9:2020/A11:2020
EUROPEAN STANDARD EN IEC 62841-3-9:2020/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-9: Particular
requirements for transportable mitre saws

Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,

pour jardins et pelouses - Sécurité - Partie 3-9: Exigences transportable Werkzeuge und Rasen- und

particulières pour les scies à onglets transportables Gartenmaschinen - Sicherheit - Teil 3-9: Besondere

Anforderungen für transportable Gehrungskappsägen

This amendment A11 modifies the European Standard EN IEC 62841-3-9:2020; it was approved by CENELEC on 2020-04-20. CENELEC

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the

status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 62841-3-9:2020/A11:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62841-3-9:2020/A11:2020
EN IEC 62841-3-9:2020/A11:2020 (E)
European foreword

This document (EN IEC 62841-3-9:2020/A11:2020) was prepared by CLC/TC 116 "Safety of motor-

operated electric tools".
The following dates are fixed:
• latest date by which this document has (dop) 2021-04-20
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2024-04-20
standards conflicting with this document
have to be withdrawn

This document modifies by common modifications EN IEC 62841-3-9:2020, which consists of the text of

IEC 62841-3-9, Ed.2.0 prepared by IEC/TC 116 “Safety of motor-operated electric tools”.

This series is divided into four parts:

Part 1: General requirements which are common to most hand-held electric motor operated tools

(for the purpose of this standard referred to simply as tools) which could come within the

scope of this standard;

Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the

requirements given in Part 1 to account for the particular hazards and characteristics of

these specific tools.
This Part 3-9 is to be used in conjunction with EN 62841-1:2015.

This Part 3-9 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it

into the European Standard: Particular requirements for transportable mitre saws.

Where a particular subclause of Part 1 is not mentioned in this Part 3-9, that subclause applies as far as

relevant. When this standard states "addition", "modification" or "replacement", the relevant text in Part 1

is to be adapted accordingly.
The following print types are used:
- requirements; in roman type
- test specifications: in italic type;
- notes: in smaller roman type.
The terms defined in Clause 3 are printed in bold typeface.

Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting

from 101.

Clauses, subclauses, notes, tables, figures and annexes which are additional to those in

IEC 62841-3-9:2020 are prefixed “Z”.
This European Standard follows the overall requirements of EN ISO 12100.

This document has been prepared under a mandate given to CENELEC by the European Commission

and the European Free Trade Association and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this

document.

Compliance with the clauses of Part 1 together with this Part 3-9 provides one means of conforming with

the essential health and safety requirements of the Directive concerned.
---------------------- Page: 4 ----------------------
SIST EN IEC 62841-3-9:2020/A11:2020
EN IEC 62841-3-9:2020/A11:2020 (E)
1 Modification to Clause 1, “Scope”
Add after the first paragraph:
“This document applies to transportable mitre saws having a mass of:
– maximum 25 kg for tools capable of being lifted by hand by one person;
– maximum 50 kg for tools capable of being lifted by hand by two persons.
This document does not apply to stationary mitre saws.

NOTE Z101 EN 1870-3 gives requirements for stationary mitre saws and mitre saws with a mass greater than indicated above.”

Add after the last paragraph:

“This document covers all significant hazards, hazardous situations or hazardous events relevant for

machines covered by this document.

NOTE Z102 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, because the corresponding

hazards are either not relevant for machines covered by this standard or do not require specific action by the designer.”

2 Modification to Clause 2, “Normative references”
Add the following normative reference:

EN 847-1:2017, Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades

3 Modification to Clause 8, “Marking and instructions”
Replace the last sentence in 8.3 with the following:

“This symbol needs not be in accordance with the colour requirements of ISO 3864-2:2016.”

Add the following new item to 8.14.2 a):

“Z101) Instruction to use only saw blades recommended by the manufacturer, which conform to

EN 847-1:2017, if intended for wood and analogous materials.”
Add the following after 8.14.2 c):
“8.14.2 Za) Replacement of items 3, 4 and 5 with the following:
3) The following information:

− that the declared noise emission value(s) have been measured in accordance with a

standard test method and may be used for comparing one tool with another;

− that the declared noise emission value(s) may also be used in a preliminary assessment of

exposure.
---------------------- Page: 5 ----------------------
SIST EN IEC 62841-3-9:2020/A11:2020
EN IEC 62841-3-9:2020/A11:2020 (E)
4) A warning:

− that the noise emissions during actual use of the power tool can differ from the declared

values depending on the ways in which the tool is used especially what kind of workpiece

is processed; and

− of the need to identify safety measures to protect the operator that are based on an

estimation of exposure in the actual conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is switched off and when it is running idle

in addition to the trigger time).”
4 Modification to Clause 19, “Mechanical hazards”
Replace the first paragraph of 19.102 with the following:

“When released, the saw unit shall automatically return to its rest position. The return device of the saw

unit, the lower guard and of the wo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.