This document, which is to be used in conjunction with EN 280-1:2022, specifies the additional safety requirements for MEWPs of Type 1 Group B equipped with a load lifting appliance. The load-lifting appliance is designed for lifting suspended loads only as part of the task being carried out by personnel from the work platform. This document deals with the additional hazards, hazardous situations and events relevant to load lifting appliances either on the extending lifting structure or on the work platform, when the MEWP and load lifting appliance are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer of the MEWP. The significant hazards covered by this document are listed in Annex A.
This document does not cover the following:
a)   the use of a MEWP for lifting persons as a suspended load;
b)   the use of a MEWP for lifting suspended loads from a control position other than the work platform;
c)   requirements for lifting accessories;
d)   lifting or lowering of suspended loads for general materials handling as carried out by a crane;
e)   MEWPs compliant with EN 280-1:2022, 4.4.1.5 and/or 4.4.1.6 (enhanced stability and overload criteria);
f)   MEWPS others than Type1 Group B.
Load lifting appliance can be:
g)   fixed load attachment points on the work platform or on the extending lifting structure where the load can be positioned in reach of the personnel on the platform;
h)   lifting equipment for lifting or lowering the load with a stationary platform. The equipment is attached to the work platform or extending structure and may have a load lifting jib.
NOTE   The lifting equipment can be either permanently attached or removable.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This document specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis.
NOTE   Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs.
1.2   This document is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   work from the platform on external live electric systems;
c)   use of compressed gases for load bearing components;
d)   getting on and off the work platform at changing levels;
e)   specific applications (e.g. railway, ships) covered by National or local regulations.
1.3   This document does not apply to:
a)   machinery serving fixed landings (see e.g. EN 81-20:2020 and EN 81-50:2020, EN 12159:2012);
b)   fire-fighting and fire rescue appliances (see e.g. EN 1777:2010);
c)   unguided work cages suspended from lifting appliances (see e.g. EN 1808:2015);
d)   elevating operator position on rail dependent storage and retrieval equipment (see EN 528:2021);
e)   tail lifts (see EN 1756-1:2021 and EN 1756-2:2004+A1:2009);
f)   mast climbing work platforms (see EN 1495:1997+A2:2009);
g)   fairground equipment;
h)   lifting tables (see EN 1570-1:2011+A1:2014 and EN 1570-2:2016);
i)   aircraft ground support equipment (see e.g. EN 1915-1:2013 and EN 1915-2:2001+A1:2009);
j)   elevating operator positions on industrial trucks (see EN ISO 3691-3:2016).
1.4   Classification:
MEWPs are divided into two main groups:
a)   Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines.
b)   Group B: All other MEWPs.
Relating to travelling, MEWPs are divided into three types:
1)   Type 1: Travelling is only allowed with the MEWP in its transport position;
2)   Type 2: Travelling with lifted work platform is controlled from a point of control at the chassis;
3)   Type 3: Travelling with lifted work platform is controlled from a point of control at the work platform.
NOTE   Type 2 and type 3 can be combined.

  • Standard
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis.
NOTE Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs.
This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
Classification: MEWPs are divided into two main groups:
a) Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines.
b) Group B: All other MEWPs.
Relating to travelling, MEWPs are divided into three types:
1) Type 1: Travelling is only allowed with the MEWP in its transport configuration;
2) Type 2: Travelling with raised work platform is controlled from a point of control at the chassis;
3) Type 3: Travelling with raised work platform is controlled from a point of control at the work platform.
NOTE Type 2 and type 3 can be combined.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis.
NOTE   Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs.
1.2   This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   electromagnetic incompatibility;
c)   work from the platform on external live electric systems;
d)   use of compressed gases for load bearing components;
e)   getting on and off the work platform at changing levels;
f)   specific applications (e.g. railway, ships) covered by National or local regulations.
1.3   This European Standard does not apply to:
a)   machinery serving fixed landings (see e.g. EN 81-1 and EN 81-2, EN 12159);
b)   fire-fighting and fire rescue appliances (see e.g. EN 1777);
c)   unguided work cages suspended from lifting appliances (see e.g. EN 1808);
d)   elevating operator position on rail dependent storage and retrieval equipment (see EN 528);
e)   tail lifts (see EN 1756-1 and EN 1756-2);
f)   mast climbing work platforms (see EN 1495);
g)   fairground equipment;
h)   lifting tables (see EN 1570);
i)   aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);
j)   elevating operator positions on industrial trucks (see EN 1726-2).
1.4   Classification:
MEWPs are divided into two main groups:
a)   Group A:   MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines.
b)   Group B:   All other MEWPs.
Relating to travelling, MEWPs are divided into three types:
1)   Type 1   Travelling is only allowed with the MEWP in its transport configuration;
2)   Type 2   Travelling with raised work platform is controlled from a point of control at the chassis;
3)   Type 3   Travelling with raised work platform is controlled from a point of control at the work platform.
NOTE   Type 2 and type 3 can be combined.

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis.
NOTE   Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs.
1.2   This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   electromagnetic incompatibility;
c)   work from the platform on external live electric systems;
d)   use of compressed gases for load bearing components;
e)   getting on and off the work platform at changing levels;
f)   specific applications (e.g. railway, ships) covered by National or local regulations.
1.3   This European Standard does not apply to:
a)   machinery serving fixed landings (see e.g. EN 81-1 and EN 81-2, EN 12159);
b)   fire-fighting and fire rescue appliances (see e.g. EN 1777);
c)   unguided work cages suspended from lifting appliances (see e.g. EN 1808);
d)   elevating operator position on rail dependent storage and retrieval equipment (see EN 528);
e)   tail lifts (see EN 1756-1 and EN 1756-2);
f)   mast climbing work platforms (see EN 1495);
g)   fairground equipment;
h)   lifting tables (see EN 1570);
i)   aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);
j)   elevating operator positions on industrial trucks (see EN 1726-2).
1.4   Classification:
MEWPs are divided into two main groups:
a)   Group A:   MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines.
b)   Group B:   All other MEWPs.
Relating to travelling, MEWPs are divided into three types:
1)   Type 1   Travelling is only allowed with the MEWP in its transport configuration;
2)   Type 2   Travelling with raised work platform is controlled from a point of control at the chassis;
3)   Type 3   Travelling with raised work platform is controlled from a point of control at the work platform.
NOTE   Type 2 and type 3 can be combined.

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This European Standard specifies technical safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform at one defined access position.
1.2   This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
It does not cover the hazards arising from:
a)   operation by radio and other wire-less controls;
b)   use in potentially explosive atmospheres;
c)   electromagnetic incompatibility;
d)   work on live electric systems;
e)   use of compressed gases for load bearing components;
f)   getting on and off the work platform at changing levels.
1.3   This European standard does not apply to:
a)   permanently installed personnel lifting appliances serving defined levels (see e.g. EN 81-1:1998 and
EN 81-2:1998);
b)   fire-fighting and fire rescue appliances (see e.g. prEN 1777:1994);
c)   unguided work cages suspended from lifting appliances (see e.g. EN 1808:1999);
d)   elevating operator position on rail dependent storage and retrieval equipment (see EN 528:1996);
e)   tail lifts (see prEN 1756-1:1994 and prEN 1756-2:1997);
f)   mast climbing work platforms (see EN 1495:1997);
g)   fairground equipment;
h)   lifting tables with a lifting height of less than 2 m (see EN 1570:1998);
i)   builders hoists for persons and materials (see prEN 12159:1995);
j)   aircraft ground support equipment (see e.g. prEN 1915-1 and 2:1995);
k)   elevating operator positions on industrial trucks (see prEN 1726-2:1999).
1.4   Classification
MEWPs are divided into two main groups:
Group A:   MEWPs where the vertical projection of the centre of gravi

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1 This European Standard specifies technical safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform at one defined access position.
1.2 This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
It does not cover the hazards arising from:
a) operation by radio and other wire-less controls;
b) use in potentially explosive atmospheres;
c) electromagnetic incompatibility;
d) work on live electric systems;
e) use of compressed gases for load bearing components;
f) getting on and off the work platform at changing levels.
1.3 This European standard does not apply to:
a) permanently installed personnel lifting appliances serving defined levels (see e.g. EN 81-1:1998 and EN 81-2:1998);
b) fire-fighting and fire rescue appliances (see e.g. prEN 1777:1994);
c) unguided work cages suspended from lifting appliances (see e.g. EN 1808:1999);
d) elevating operator position on rail dependent storage and retrieval equipment (see EN 528:1996);
e) tail lifts (see prEN 1756-1:1994 and prEN 1756-2:1997);
f) mast climbing work platforms (see EN 1495:1997);
g) fairground equipment;
h) lifting tables with a lifting height of less than 2 m (see EN 1570:1998);
i) builders hoists for persons and materials (see prEN 12159:1995);
j) aircraft ground support equipment (see e.g. prEN 1915-1 and 2:1995);
k) elevating operator positions on industrial trucks (see prEN 1726-2:1999).
1.4 Classification
MEWPs are divided into two main groups:
Group A:   MEWPs where the vertical projection ...

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Requirements on safety devices referring to EN 954-1 including a study of the operational characteristics of load and moment sensing systems with regard to dynamic situations.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day