This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs: C10-C13) and middle-chain chlorinated paraffins (MCCPs: C14-C17) in textile articles, especially in polymer of the coated fabrics, prints made of polymer and buttons made of polymer (e.g. polyvinylchloride) by means of solvent extraction and gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS).

    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Draft
      15 pages
      English language
    • sale 15% off
    • Draft
      15 pages
      French language

This document specifies a method for the automatic determination of the deformability of textile fabrics,
including continuous-fibre reinforcement textiles. This method is not applicable to resin impregnated
fabrics.
The method is suitable for use with fabrics such as woven or knitted fabrics, nonwovens, non-crimp
fabrics, fabrics made of glass rovings or untwisted carbon filament yarns intended for reinforced
composite materials. When applying the method to multi-axial non-crimp fabrics, t...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This document describes a method, using capacitance measuring equipment, for determining the unevenness of linear density along the length of textile strands. The method is applicable to tops, slivers, rovings, spun yarns and continuous filament yarns, made from either natural or man-made fibres, in the range of 4 tex (g/km) to 80 ktex (kg/km) for staple-fibre strands and 1 tex(g/km) to 600 tex (g/km) for continuous-filament yarns. It is not applicable to fancy yarns or to strands composed fully...view more

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      English language

This document specifies a gravimetric method and a vibroscope method for the determination of the linear density of textile fibres applicable respectively to: a) bundles of fibres; b) individual fibres. Useful data can be obtained on man-made fibres and, with less precision, on natural fibres. This document only applies to fibres which can be kept straight and, in the case of bundles, parallel, during test preparation. It is properly applicable when the fibres are readily freed of crimp. The met...view more

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      French language
    • sale 15% off
    • Draft
      10 pages
      English language

This document specifies a method, using formic acid and zinc chloride, to determine the mass percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter, in textiles made of mixtures of — viscose or certain types of the cupro or modal or lyocell fibres with — flax fibres. This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incom...view more

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      French language
    • sale 15% off
    • Draft
      4 pages
      English language

This document specifies a method, using acetone, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of — acetate with — wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, abaca, alfa, coir, broom, ramie, sisal, cupro, viscose, modal, polyamide, polyester, polypropylene, acrylic, elastolefin, elastomultiester, melamine, polypropylene/polyamide bicomponent, polyacrylate and glass fibres. ...view more

    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      French language
    • sale 15% off
    • Draft
      2 pages
      English language
    • sale 15% off
    • Draft
      2 pages
      French language

This document provides definitions in the field of "smart" textiles and textile products as well as a categorization of different types of smart textiles. It describes briefly the current stage of development of these products and their application potential and gives indications on preferential standardization needs.

    • sale 15% off
    • Technical report
      22 pages
      English language
    • sale 15% off
    • Technical report
      23 pages
      French language
    • sale 15% off
    • Draft
      22 pages
      English language

This document specifies the method and conditions of test for the determination of the breaking force
and elongation at break of individual fibres in the conditioned or wet state.
The determination of these fibre properties, when carried out on different kinds of testing equipment,
will not generally give identical results. To avoid such differences, this document is restricted to the use
of constant-rate-of-extension testing machine.
It is applicable to all fibres, including crimped fibres...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies a method using hot formic acid to determine the mass percentage of melamine
fibres after removal of non-fibrous matter, in textiles made of mixtures of:
— melamine fibres
with
— cotton, polypropylene or aramid fibres.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for determination of triclosan residues in textiles by high performance liquid chromatography — tandem mass spectrometry (HPLC-MS/MS). This method is applicable to all kinds of textile products.

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Draft
      6 pages
      English language

This document specifies the method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state. The determination of these fibre properties, when carried out on different kinds of testing equipment, will not generally give identical results. To avoid such differences, this document is restricted to the use of constant-rate-of-extension testing machine. It is applicable to all fibres, including crimped fibres, pro...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Draft
      12 pages
      English language
    • sale 15% off
    • Draft
      13 pages
      French language

This International standard specifies a method for quantitative and qualitative analysis of extractable organotin compounds without derivatization in textile and textile‐related products.
This International Standard provides a method that uses Liquid Chromatograph with Tandem Mass Spectrometer (LC/MS/MS).

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after removal of non-fibrous matter, in textiles made of mixtures of — silk with — wool or other animal hair.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language

This document specifies a method using hot formic acid to determine the mass percentage of melamine fibres after removal of non-fibrous matter, in textiles made of mixtures of: — melamine fibres with — cotton, polypropylene or aramid fibres.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language

This document specifies a method, using dimethylformamide, to determine the mass percentage of acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of mixtures of — acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with — wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, polypropylene, elastomultiester, elastolefin, melamine, polypropylene/polyamide bicomponent, polyacrylate or glass fib...view more

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language

This document specifies methods of quantitative analysis of various ternary mixtures of fibres.
The field of application of each method for analysing mixtures, specified in the parts of ISO 1833,
indicates the fibres to which the method is applicable.
This document is applicable to mixtures of fibres with more than three components provided that
the combination of test methods leads back to simple cases of fibre mixtures. Table B.1 illustrates the
typical ternary mixtures and their applied ...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This document specifies a common method for the quantitative chemical analysis of various mixtures
of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in
general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the
scope of the appropriate part.

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This document specifies a qualitative and quantitative procedure to determine the composition of
animal hair fibre blends (made of wool, cashmere, yak, alpaca, camel or angora) by LC-MS without
protein reduction.
NOTE 1 The composition of non-animal hair fibres can be measured by ISO 1833 (all parts). Both results are
combined to determine the total fibre composition.
The method is based on a preliminary identification, by light microscopy, of all fibres in the blend on the
basis of their ...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This document specifies a test method for determining the presence of organotin compounds. This test
method is applicable to all types of materials of textile products.
NOTE CEN/TR 16741 defines which materials are concerned by this determination.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using sulfuric acid, to determine the mass percentage of polyamide,
after removal of non-fibrous matter, in textiles made of binary mixtures of
— polyamide
with
— polypropylene/polyamide bicomponent.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies a method using trichloroacetic acid and chloroform to determine the mass percentage of polyester fibres after removal of non-fibrous matter, in textiles made of mixtures of — polyester fibres with — aramid fibres (except polyamide imide), flame retardant (FR) viscose and polyacrylate.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language
    • sale 15% off
    • Draft
      3 pages
      English language

This document specifies a qualitative and quantitative procedure to determine the composition of animal hair fibre blends (made of wool, cashmere, yak, alpaca, camel or angora) by LC-MS without protein reduction. NOTE 1 The composition of non-animal hair fibres can be measured by ISO 1833 (all parts). Both results are combined to determine the total fibre composition. The method is based on a preliminary identification, by light microscopy, of all fibres in the blend on the basis of their morpho...view more

    • sale 15% off
    • Standard
      24 pages
      English language
    • sale 15% off
    • Standard
      24 pages
      English language
    • sale 15% off
    • Standard
      26 pages
      French language

This document specifies methods of quantitative analysis of various ternary mixtures of fibres. The field of application of each method for analysing mixtures, specified in the parts of ISO 1833, indicates the fibres to which the method is applicable. This document is applicable to mixtures of fibres with more than three components provided that the combination of test methods leads back to simple cases of fibre mixtures. Table B.1 illustrates the typical ternary mixtures and their applied corre...view more

    • sale 15% off
    • Standard
      17 pages
      English language
    • sale 15% off
    • Standard
      19 pages
      French language
    • sale 15% off
    • Draft
      17 pages
      English language

This document specifies a common method for the quantitative chemical analysis of various mixtures of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the scope of the appropriate part.

    • sale 15% off
    • Standard
      18 pages
      English language
    • sale 15% off
    • Standard
      19 pages
      French language
    • sale 15% off
    • Draft
      18 pages
      English language

This document specifies a method, using sulfuric acid, to determine the mass percentage of polyamide, after removal of non-fibrous matter, in textiles made of binary mixtures of — polyamide with —polypropylene/polyamide bicomponent.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language

This document specifies a method, using diluted acetic acid, to determine the mass percentage of
chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of:
— chitosan fibre
with
— certain other fibres.
This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie,
viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide,
acrylic).

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies the qualitative analysis for cupro and lyocell using the two methods separately — scanning electron microscope (SEM) method based on the application of ISO 20705, and — spectral analysis method. These testing methods are applied only for cupro and lyocell, or those blends. If other fibres are present, those are identified using the test method of ISO/TR 11827 and removed using the relevant part of the ISO 1833 series. This method is not applicable for the fibre surface th...view more

    • sale 15% off
    • Standard
      21 pages
      English language

This document specifies the quantitative analysis of cupro and lyocell mixtures using the microscopical analysis as described in ISO 20705 after re-dyeing cupro and lyocell mixtures. This testing method is applied only for cupro and lyocell, or those blends. If other fibres are present, those are identified using the test method of ISO/TR 11827 and removed using the relevant parts of the ISO 1833 series. This method is not applicable for the fibre surface is damaged during the process (e.g. chem...view more

    • sale 15% off
    • Standard
      21 pages
      English language

This document specifies quantitative testing methods of fibres that consist of cupro and lyocell by using infrared spectroscopy (IR) analysis and multivariate analysis. This testing method is applied only for cupro or lyocell or a mix of both. The other fibres, such as cotton, viscose, etc. are identified using the test method of ISO/TR 11827 and removed using the relevant part of the ISO 1833 series.

    • sale 15% off
    • Standard
      11 pages
      English language

This document specifies a method, using concentrated sulfuric acid, to determine the mass percentage of chlorofibres and certain other fibres, after removal of non-fibrous material, in textiles made of mixtures of
— cotton, viscose, cupro, modal, lyocell, acetate, triacetate, polyamide, polyester, elastomultiester, certain acrylic and certain modacrylic fibres
with
— chlorofibres (based on homopolymers of vinyl chloride), polypropylene, elastolefin, melamine and polypropylene/polyamide bicomp...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies common methods for the quantitative microscopical analysis of various mixtures of fibres. The methods described are based on the use of a light microscope (LM) or a scanning electronic microscope (SEM), on the measurements of the fibre apparent diameter (preparation of longitudinal views) or on the measurements of fibre section area (preparation of cross views), depending on the section shape of the fibres.
NOTE 1 When the section shape is circular or almost circular, th...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document specifies common methods for the quantitative microscopical analysis of various mixtures of fibres. The methods described are based on the use of a light microscope (LM) or a scanning electronic microscope (SEM), on the measurements of the fibre apparent diameter (preparation of longitudinal views) or on the measurements of fibre section area (preparation of cross views), depending on the section shape of the fibres. NOTE 1 When the section shape is circular or almost circular, the...view more

    • sale 15% off
    • Standard
      17 pages
      English language
    • sale 15% off
    • Standard
      17 pages
      French language

This document specifies methods for the identification of some bast fibres (flax, hemp, ramie) using both light microscopy (LM) and scanning electron microscopy (SEM). This document is also applicable to blends of these bast fibres and products made from them.

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

This document specifies methods for the identification of some bast fibres (flax, hemp, ramie) using both light microscopy (LM) and scanning electron microscopy (SEM). This document is also applicable to blends of these bast fibres and products made from them.

    • sale 15% off
    • Standard
      27 pages
      English language
    • sale 15% off
    • Standard
      29 pages
      French language

This document specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of mixtures of
— jute
with
— animal fibres.
The animal-fibre component can consist solely of hair or wool, or of any mixtures of the two.
This document is not applicable to products in which dyestuffs or finishes contain nitrogen.
NOTE Because this method differs in principle from the general method based on selectiv...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of mixtures of — jute with — animal fibres. The animal-fibre component can consist solely of hair or wool, or of any mixtures of the two. This document is not applicable to products in which dyestuffs or finishes contain nitrogen. NOTE Because this method differs in principle from the general method based on selective solu...view more

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language

This document specifies a method, using carbon disulfide/acetone, to determine the mass percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of
— certain chlorofibres,
with
— wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, elastomultiester, acrylic, melamine, polypropylene, polypropylene/polyamide bicomponent, polyacrylate and glass fibres.
It is also possible to analyse mixtures containing chlorofibres by using ...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using benzyl alcohol, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of
— acetate
with
— triacetate, polypropylene, elastolefin, melamine, polypropylene/polyamide bicomponent and polyacrylate fibres.

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using glacial acetic acid, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of
— acetate
with
— certain chlorofibres or after-chlorinated chlorofibres.
It is also possible to analyse mixtures containing acetate by using the test methods described in ISO 1833-3 or ISO 1833-9.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using carbon disulfide/acetone, to determine the mass percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of — certain chlorofibres, with — wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, elastomultiester, acrylic, melamine, polypropylene, polypropylene/polyamide bicomponent, polyacrylate and glass fibres. It is also possible to analyse mixtures containing chlorofibres by using the t...view more

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language

This document specifies a method, using concentrated sulfuric acid, to determine the mass percentage of chlorofibres and certain other fibres, after removal of non-fibrous material, in textiles made of mixtures of — cotton, viscose, cupro, modal, lyocell, acetate, triacetate, polyamide, polyester, elastomultiester, certain acrylic and certain modacrylic fibres with — chlorofibres (based on homopolymers of vinyl chloride), polypropylene, elastolefin, melamine and polypropylene/polyamide bicompone...view more

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language

This document specifies a method, using benzyl alcohol, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of — acetate with — triacetate, polypropylene, elastolefin, melamine, polypropylene/polyamide bicomponent and polyacrylate fibres.

    • sale 15% off
    • Standard
      2 pages
      English language
    • sale 15% off
    • Standard
      2 pages
      French language

This document specifies a method, using glacial acetic acid, to determine the mass percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of — acetate with — certain chlorofibres or after-chlorinated chlorofibres. It is also possible to analyse mixtures containing acetate by using the test methods described in ISO 1833-3 or ISO 1833-9.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language

This document specifies a method, using xylene, to determine the mass percentage of polypropylene, after removal of non-fibrous matter, in textiles made of mixtures of
— polypropylene fibres
with
— wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, acetate, triacetate, polyamide, polyester, acrylic, glass fibres, elastomultiester, melamine and polyacrylate.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using aluminium sulfate, to determine the mass percentage of cellulose fibres, after removal of non-fibrous matter, in textiles made of mixtures of
— cellulose fibres (natural or regenerated)
with
— polyester, polyamide, acrylic, wool and elastane fibres.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using aluminium sulfate, to determine the mass percentage of cellulose fibres, after removal of non-fibrous matter, in textiles made of mixtures of
— cellulose fibres (natural or regenerated)
with
— polyester, polyamide, acrylic, wool and elastane fibres.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document describes a testing procedure to determine the rate of lead release from all materials of
textile articles.
NOTE With this test procedure it can be demonstrated that the rate of lead release from such an article or any
accessible part of an article, whether coated or uncoated, does or does not exceed 0,05 μg/cm2 per hour, and, for
coated articles, that the coating is sufficient to ensure that this release rate is not exceeded for a period of at least
two years of normal or rea...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using diluted acetic acid, to determine the mass percentage of chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of: — chitosan fibre with — certain other fibres. This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie, viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide, acrylic).

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      French language

This document describes a testing procedure to determine the rate of lead release from all materials of textile articles.
NOTE   With this test procedure it can be demonstrated that the rate of lead release from such an article or any accessible part of an article, whether coated or uncoated, does or does not exceed 0,05 μg/cm2 per hour, and, for coated articles, that the coating is sufficient to ensure that this release rate is not exceeded for a period of at least two years of normal or reasona...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies a method, using dichloromethane, to determine the mass percentage of triacetate or polylactide, after removal of non-fibrous matter, in textiles made of mixtures of
— triacetate or polylactide
with
— wool or other animal hair, silk, protein, cotton, viscose, cupro, modal,lyocell, polyamide, polyester, acrylic, elastomultiester, polypropylene, elastolefin, melamine, polypropylene/polyamide bicomponent,polyacrylate and glass fibres.
Triacetate fibres which have been par...
view more

    • sale 10% off
    • Standard
      9 pages
      English language
    • e-Library read for
      1 day